User's Manual

131
Using your phone as a mass
storage device
You phone can only be used as a mass
storage device if you have a memory
card inserted.
1 Disconnect your phone from your PC.
2 From the standby screen select
, then touch and choose Phone
settings.
3 Select Connectivity, then USB
connection mode.
4 Select Mass storage and touch OK.
5 Connect your phone to your PC. Your
phone will read: Connecting as Mass
Storage… followed by Connected
as Mass Storage Mode. Do not
disconnect during transfer.
6 All of your phone files will
automatically be stored onto your PC
hard drive.
Note: Your phone must be unplugged
from your PC to initiate Mass Storage.
Note: Mass storage backs up content
saved on your memory card only, not
your handset memory. To transfer the
content of your handset memory (e.g.
contacts) you’ll need to synchronise
using PC Sync.
DivX Converter
Install the DivX converter which is
supplied on the same CD as the PC Sync
software.
Once installed select DivX from the
Program Files on your PC, then DivX
converter followed by Converter.
This will open the Converter application.
Use the arrows in the application to
change the conversion format to Mobile.
If you do a right click on the application
box and select Preferences, you can
change the location of where the
converted files are saved.
Once you are ready to convert your files,
simply drag and drop the files into the
application, for initial analysis. Following
this, you will need to select Convert for
the process to begin. When the process is
finished a Conversion complete pop up
will be displayed.