User's Manual

308
DataManagement
ReceivingDataOnebyOne
a
M
[Menu]
X
(LifeKit)
X
"ReceiveIrdata"
X
"Receive"
X
"Yes"
b
Performinfraredtransmissionoperationson
thesendingdevice
Infraredcommunicationstarts.
c
"Yes"
Send/Receiveallviainfraredcommunication
SendingandReceivingAllData
YoucanexchangealldatawithaPCoranotherFOMA
terminalatatime.
Toexchangealldata,anauthenticationpasswordisusedtoidentify
thesenderandreceivercorrectly.Anauthenticationpasswordis
any4-digitnumberthatyouselectedbeforeinfraredcommunication
andshouldbeenteredbothonthesendingandreceivingdevices.
SendingAllData
Setthereceivingdevicetotheinfraredreceivingmodebeforesendingdata.
Example:TosendallPhonebookentriesontheFOMAterminal
a
Stand-bydisplay
X
D
X
M
[Menu]
X
"Send
Irdata"
X
"allinphone"
IfanimageissettoaPhonebookentry,awarning
indicatingthatitmaytakeawhiletosendappears.Select
"Yes"tosend.
b
EntertheTerminalsecuritycodeXEnterthe
authenticationpasswordX"Yes"
Infraredcommunicationstarts.
ReceivingAllData
ReceivingalldataoverwritesthedataontheFOMAterminaland
deletesallsaveddataincludingprotectedmails.Makesurethat
importantdataisnotsavedbeforesendingorreceivingalldata.
a
M
[Menu]
X
(LifeKit)
X
"ReceiveIrdata"
X
"Receiveall"
X
"Yes"
b
EntertheTerminalsecuritycodeXEnterthe
authenticationpassword
c
Performinfraredtransmissionoperationson
thesendingdevice
Infraredcommunicationstarts.
d
"Yes"
Note
Amessageappearsifthedestinationdevicecannotbefound.
Checkthedistanceandanglewiththeotherpartyagain.
Filesin"Mypicture"cannotbesentatatime(onefilecanbe
sentatatime).
W_slX[kh{UGGwGZW_GG~SGvGYYSGYWW_GGXWaYZGht