"This Device is not intended for sale the U.S.A Part 15.21 statement " Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. * Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Part 15 Class B Compliance This device and its accessories comply with part of FCC rules and ICES-003 Class B digital apparatus requirements for Industry Canada. Operation is subject to the following two conditions: (1) This device & its accessories may not cause harmful interference. (2) This device & its accessories must accept any interference received, including interference that may cause undesired operation.
gels : FOAM Terminal What You Can Do with L-04C Part Names and Functions Precautions > Handling Precautions BASIC Lupercalia Before Using Screen Explanation Character Entry Sound/Screen Setting Ei Lock/Security Call Telephone Mail Phone book -mode/Full Browser -Channel Camera Music i-crippling i-motion Mosaic-Keitai Convenient Tools Data Management Support Appendix Index
What You Can Do with L-04C Guide per-installed in the FOAM terminal allows you to look for operating instructions of a desired function. When you cannot refer to this manual, you can search functions with Guide quickly. Stand-by display B [7 l(for over 1 second) Your FOAM terminal, phone number, and mall address that are used in Japan are available overseas (supporting 3G and GSM areas}. You can receive graphic information such as news or weather forecasts.
Part Names and Functions @Front @ Rear @ Left side @Right side The micros D card insertion position is underneath the battery pack inside the back cover.
Display the main menu. Navigation Left key Display the received call list screen. [= Mail key Display the mail menu. Navigation Down key Display the Phone book list screen. start key Make/receive a call. . Dial keys Enter a phone number or character. 5 mode (Drive mode) key Mouthpiece Charging light/illumination [= [Set key Navigation Up key Display a schedule. [E= -modified-oppll key Display the i-mode menu. Navigation Right key Display the redial list screen.
The UIM is an IC card that contains subscription information such as your phone number. + Turn the FOAM terminal power off and hold it with both hands.
Charging with AC adapter Open the external connector terminal the FOAM terminal and flip it over . With the Inscribed arrow side up, Insert the AC adapter connector straight into the external connector terminal of the FOAM terminal. Connect the AC adapter plug to an electric outlet. + The charging light turns on and charging starts. When charging completes, the charging light turns off. After charging completes, pull the AC adapter connector straight out while pressing the release buttons.
Turning Power ON Turning power ON 1 With the power turned OFF, | (for over & ° grossness ele) {To [Iga Te iD TV Togo : After turning the power ON for the first time, set ¢ "Set Date& Time", "Change security code”, and : "Key Pad as default settings. 2 seconds) : 1 Turn the power ON b "Yes" After the Wake-up screen is displayed, the Stand-by $ display appears.
Editing your own number 1 stand-by display > p> "Own Number" P| B [Detail] Enter the Terminal security code 2 » "Edit" 3 Edit each item » [i= [Done] Searching for Key Operations Search and refer to the function you want to know or use. Depending on the function, you can execute the searched function after searching. This function is provided in Japanese only.
Viewing Disconsolate The meanings of icons displayed at the top of the screen are as follows.
Record message set Alarm set Today's schedule or To do set micros D card inserted Outgoing voicelessness calls restricted Outgoing mails restricted Data access lock set Notification icon A number displayed on each icon indicates the number of entries. & Missed call & Unread mail € Voice mail message @ Record message Viewing Main Menu On the FOAM terminal, execute functions, set items, or save entries or data from menus such as main menu or sub menu.
| Function | Operation | Description Own Number [6] Navigation Up/Down key | Navigation Up or Down key. Settings [x] Navigation Left/Right key | Press Navigation Left or Mosaic-Keitai Right key. * Depending on the main menu design, the description of menu name may differ. Navigation Key Operation Soft Key Operation Available operations on the currently opened screen are displayed as Soft keys at the bottom screen. in this manual, operations such as moving the : . .
{ When using Dial keys 1 In Stand-by, press =| to display the Main menu This section explains operations for accessing the main menu from the Stand-by display and displaying the setting screen for "Color theme” in the following two ways.
Entering Characters Character entry is required in various situations such as when saving entries to Phone book or creating mail. Learn how to enter characters beforehand to make use of the FOAM terminal. Character entry screen On the Character entry screen, the current input mode and operation guide are displayed.
Character entry method in Hiragana and Kanji input mode, enter characters using the following two prediction functions. Prediction input function: predicts conversion options. Next phrase prediction function: predicts the next phrase from the characters being entered.
@ 2 ns kiwi 8 oe Changing Ring Tone 1 Stand-by display b> [=e] pb "Settings" b"Sounds & Vibration" b "Select ring tone” 2 Select an item and select a file 3 Using Manner Mode 1 Stand-by display b | over 1 second) When the Manner mode is set, 9 appears at the fop of the screen. Even while the manner mode is set, the camera shutter tone, shooting start tone and end phone sound. H To cancel the Manner mode In Stand-by, press over 1 second).
+ ’ i Changing main menu design Changing Screen Settings { Set the menu design displayed when is ® ° Changing Stand-by display pressed in Stand-by. 1 stand-by display b> [ue] pb "Settings" b 1 stand-by display p> [ove] p b> "Display" b "Stand-by display” “Menu priority” b> "Custom 2 Set each item menu” pb "Yes information 3 To switch the menu temporarily, press [@ |[Basic)/ [= [Custom] while the menu is displayed.
information Kinase Tool can also be sat using ths following steps. Stand-by display B p [i= |[Kisekae] Ib move the cursor to b> [Open] To reset the settling, press on the Kinase Tool list screen B "Reset screen display / sound setting” I enter the Terminal security code.
a a Various Security Codes @ Cautions on security codes » Avoid setting security codes using your birthday, part of your phone number, your address or room number, or "1234" that can be easily guessed by others. Be sure to write down the set security codes and store them in a separate location. + Do not reveal your security codes to others. COMO is not responsible for damage caused by misuse of your security codes by others.
i-mode password {At the time of contract: The "-mode password’ is a 4-digit number required to preregister contents in My Menu, and subscribe cancellation the message service or fee-based i-mode services. (Some other information service providers may set individual passwords.) You can change the password by yourself. From i-mode, you can change it by accessing i Menu' bp “English” I “Options” > "Change i-mode Password”. PIN codeine code (At the time of contract: You can set PINT and PIN codes to the UIM.
Various Lock Functions Lock function Lock all Locks the FOAM terminal to prevent operations by others. 1 Stand-by display b [os] b “Settings” b "Lock/Security” b> "Lock" Pb "Lock all" b> Enter the Terminal security code Pp "Yes" ¥ To cancel Lock all While Lock all is set, press fuel [Unlock] or press any dial key Br enter the Terminal security code. If failed to enter the correct Terminal security code five times in a row, the power automatically rns off.
Lock unction Desertion Self mode Disables all functions that require communication, such as making/ receiving calls, using i-mode, or condescending mails. 1 Stand-by display b [ee] b "Settings" Pb "Call/VT/Dialing" b "Self mode” I Data access lock Specifies and locks functions to prevent unauthorized use by others.
Restricting Incoming Calls arrive Reject incoming calls without caller ID per reason for anonymous call. 1 stand-by display b> [ve] pb "Settings" pb "Calumniating" Pb "Incoming call" b "Anonymous caller" Bb Enter the Terminal security code br Select/set each item Rejecting calls from callers unset in Phone book Set to reject calls from callers not saved to Phone book or without caller ID.