Sub Menu Example Notation Rules Items displayed on the sub menu may vary depending on the settings or registered items of the FOMA terminal. [Scroll] Set the number of lines scrolled after pressing H on a site, Scre ] "1 line"/"3 lines"/"5 lines"/"Page" [Message list] Configure Message R/F list screen display. 1 Line:Display only the subject in one line. 2 Line:Display the subject and received date and time in two lines. 1 2 3 4 1 Menu item name.
Removing Using the UIM (FOMA Card) The UIM is an IC card that contains subscription information, such as your phone number. You can only use communication functions including calls, mail, and i-mode communication with a UIM inserted in the terminal. Inserting the UIM into another FOMA terminal allows you to operate multiple FOMA terminal for various purposes. For details on how to handle the UIM, refer to the UIM instruction manual. To remove the UIM, close the FOMA terminal and hold it with both hands.
UIM Security Function The UIM security function UIM Operation Restriction is embedded in the FOMA terminal as a security function to protect your data and files. ・ When you download data or files from sites or acquire data attached to mail with the UIM inserted into the FOMA terminal, the UIM operational restriction function is automatically set to these data or files.
Note ・ Even if you set the data/file restricted with this function for the Stand-by display wallpaper, etc., the setting will revert to the default if another UIM is inserted or if no UIM is inserted. When you re-insert your UIM, the setting will revert to the original setting you configured. ・ Pre-installed i-αppli programs are not restricted. However, if you delete an i-αppli and then download it, the newlydownloaded i-αppli will be restricted.
Inserting/Removing the Battery Pack ③ Align the tabs for the rear cover and while pushing it in the direction of 1, slide it in the direction of 2 and push until it clicks to its place. ・ Turn off the terminal and hold it closed in your hand. Inserting ① While pushing the rear cover in the direction of 1, slide the cover in the direction of 2.
Removing ① While pushing the rear cover in the direction of 1, slide the cover in the direction of 2. Lift the cover as shown by 3 ② Press down the battery pack in the direction of 1, lift the tab in the direction of 2, and remove in the direction of 3 Charging the FOMA Terminal Use the AC adapter (optional), or DC adapter (optional) designed for the terminal to charge the FOMA terminal. Also use the exclusive battery pack L02 for the FOMA terminal. Desktop Holder L02 (optional) is also available to use.
■ Charging ・ For details, refer to the instruction manuals for the FOMA AC Adapter 01/02(optional), FOMA Overseas/Domestic AC Adapter 01 (optional) , FOMA DC Adapter 01/02 (optional) or Desktop Holder L02 (optional). ・ The FOMA AC Adapter 01 can be used only for AC100V. The "FOMA AC Adapter 02" and "FOMA AC Adapter 01 for Global use" support from AC100V to 240V. ・ The adapter plug shape is designed for domestic use in Japan (for AC100V).
・ Depending on the battery pack recharge level, set functions, operating environment such as ambient temperature, or radio wave reception level (Poor or weak radio wave reception level), battery life can reduced to half. ■ Estimated battery pack charging time FOMA AC adapter 01/02 Approx. 180 minutes FOMA DC adapter 01/02 Approx. 180 minutes Connect the AC Adapter plug to an electric outlet 3 Charging starts, and the illumination lights.
2 Make sure the side with AC Adapter connector ( Desktop Holder side) symbol faced up and insert horizontally into the Desktop Holder. 3 Insert a FOMA terminal into the Desktop Holder along the direction of (1). Charging starts and the illumination turns to red. ・ Pay attention not to be caught by strap. 4 46 After finishing charging, remove the FOMA terminal from Desktop Holder After charging finishes, illumination will turn off.
Battery Level Checking the Battery Level An icon indicating the approximate battery level is displayed at the top of the screen. (Blue): The battery is full. (Blue): The battery is getting low. (Red): The battery is almost completely exhausted. Charge the battery. (Red): The battery is almost completely exhausted. The terminal will turn itself off in a moment. Charge the battery. Note ・ When an icon indicating battery level is (Red) or (Red), the camera and infrared communication are unavailable.
Power On/Off Turning the Terminal On or Off Turning the Power On 1 When the terminal power is turned off, P (hold down for 2 + Seconds) After the wakeup screen is displayed, the Stand-by display is displayed. When the "PIN1 code request" is set to "ON" The PIN1 code entry screen opens. After the correct PIN1 (P115) code is entered, the Wakeup screen and then the Stand-by display appears. You can make emergency calls (to 110, 119, or 118) even when the PIN1 entry screen is open.
Set date&time Setting the Date and Time You can set to update the time automatically. The Local time zone, Daylight Saving and Date&Time can also be set. 1 M [Menu] ] (Settings) ] "Date&Time" ] "Set Date&Time" Date and Time Settings Screen 2 [Set date/time]* You can manually set the date and time. To set the date, use J to move the cursor to the place to change the date and enter the date with the dial keys (to set the date on the calendar screen, press C[Select] in the date entry field ).
Caller ID notification Own number Sending the Caller ID Viewing Your Own Number You can set to show/hide your Caller ID to the network in advance. ・ Your Caller ID (phone number) is valuable information. Be cautious about sending your Caller ID ・ Caller ID notification cannot be set when "Out of service area" is displayed. 1 2 M [Menu] ] (Service) ] "Caller ID notification" Perform the following operation [Activate/Deactivate] Set to show/hide the Caller ID.
Voice/Video calls Using the Phone / Video Phone Video calls ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Making Voice/Video calls ・・・・・・・・・・・・・・・・・・・・・・・・・ Using Redial/Received Call Logs ・・・・・・・・・・・・・・・・・ Using the Recent Calls ・・・・・・・・・・・・・・・Recent calls Showing/Hiding Caller ID for Each Call ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・184/186 Sending Touch-tone Signals ・・・・・・・・・・・・・・・・ Pause Making International Calls ・・・・・・・・・・ WORLD CALL Setting the Prefix to be Added to a Phone Number ・・・・・・・・・・・・・・・・・・・・・・・
Video calls The Videophone call can be used with a mobile phone that supports DOCOMO's Videophone call service. Because this FOMA terminal does not have an inside camera, so the images sending to the others will be the pictures or images captured by the out side camera. ・ DOCOMO's Video call service complies with "ISO 3GPP*1 standardized 3G-324M*2". DOCOMO's Video calls cannot connect with handsets that support a different form of Video call.
2 To make a voice call A To make a Video call M [Menu] ] "Video phone call" A ringback tone sounds from the earpiece, and the "Calling..." dialing screen is displayed until the other party answers the call. ・ C [Spk on/Spk off]: Voice call screen Toggle Hands-free ON or OFF. Video call screen ・ Pressing a dial key/*/# during a call allows you to send touch-tone signals. ■ During a voice call During a voice call, screen will display setting status with icons.
Sub Menu on the Phone Number Entry Screen 1 Phone number entry screen (P52) ] M [Menu] ] Perform the following operations [Video phone call] Make a Video call. [Caller ID] Set whether the other party receives your Caller ID when you make a call.→P61 [Int. call] After selecting the country code to make a call, "009130010" (WORLD CALL) and the country code will be inserted at the beginning of the phone number.
Sub Menu During a Video call 1 Video call screen (P53) ] M [Menu] ] Perform the following operations [End call] Disconnect the call. [Hold] Place the active call on hold. To cancel, press C[Camera] or I [Alternate image]. [Camera image/Substitute image] Switch the image to send between the alternate image and the camera image. [Camera set] Configure the camera for Video calls. Press J to select an icon. After setting, press M[Close]. Zoom :Zoom the camera image (x1 / x2).
5 Which number of Multi Number is used for dialing* / / Basic number/Additional number 1/Additional number 2 * Appears if you subscribe to the Multi number service. 6 Call date and time Using Redial/Received Call Logs Redial and the Received call logs can be used to make phone calls. Also, the Recent calls (sent and received) can be used to make calls.
Note ・ You can make a voice call by selecting an entry on the Dialed Calls list screen and pressing A. You can also make a Video call if you select M [Menu] ] "Video phone call". ・ If the same phone number is saved repeatedly in the Phonebook, the name found first in the Reading search is displayed. ・ A call dialed with "184" or "186" will be recorded as a different Redial entry.
Received Calls Using the Received Call Log the cursor to a log entry ] R [View] 2 Move 1 The name saved in the Phonebook 1 If the phone number is not 2 in the Phonebook, 3 "Unregistered" is displayed, and if the Caller ID was not 4 received, "User unset" is 5 7 displayed.
Note ・ You can make a voice call by selecting an entry on the Received calls detail screen and pressing A. You can also make a Video call by selecting M [Menu] ] "Video phone call". ・ The reason for no Caller ID is displayed in the log entry of the call without Caller ID.→P124 ・ If the same phone number is saved repeatedly in the Phonebook, the name found first in the Reading search is displayed.
Recent calls Using the Recent Calls Up to 60 incoming and outgoing calls can be recorded in "Recent call log". ・ If there have been more than 60 calls recorded, the most recent 60 calls are retained 1 Stand-by display ] A For subsequent steps and the description of screen components, see "Redial" (P57) and "Received calls" (P59) sections. Note ・ The sub menu of the Recent call list screen/detail screen is the same as the one of the Redial and Received call list screen/detail screen.
Pause Sending Touch-tone Signals Enter "P" and a number after the phone number and make a voice call to send a push signal (DTMF) for the number after "P". This is useful when you use, for example, online ticket reservation or balance inquiry services. ・ The signal may not be received depending on the device on the receiving side. the phone number ] Press * 3 times and 1 Enter enter "P" ] Enter the number to send ] A After the call is connected, the number after "P" is displayed.
・ If the Area Code (City Code) starts with "", remove "0". (In a few countries, like Italy, "0" must not be removed.). ・ An international call can be made by entering "009130010-Country code - Area code (City code) - other party's phone number.
Making an International Call Easily The International Call settings can be changed. ・ Even if the Caller ID notification is set, the Caller ID may not be notified or phone number is not displayed correctly, depending on the telecommunication carrier. In this case, you cannot make a call using the Received calls.
Registering a Country Code Up to 50 Country codes necessary to make an international call can be saved. 1 [Edit] Edit the selected country code. Go to Step 2 (P65) in "Registering Country Codes "" here.". [Delete] Delete the selected country code. M [Menu] ] (Settings) ] "International dial" ] "Country code list" [Delete all] Delete all country codes. Country code list screen ] Perform the following operations 2 ・MC[Menu] [Edit]: Edit the selected county code.
a Prefix entry field ] Enter the Number 2 Select ] I [Done] ・ Up to ten digits can be entered as a prefix. Note ・ Do not add Pauses and the such to the prefix. If they are present, the call can not be connected. Sub Address Making a Call by Specifying a Sub Address You can set whether digits after ":" in a phone number with a ":" are identified as a sub-address. A sub-address is used to access a specific device connected to an ISDN line or to select contents on "V live".
[Menu] ] (Settings) ] "Call/VT/Dialing" ] "Call 1M feature" ] "Noise reduction" ] "ON"/"OFF" ON :Activate Noise Reduction. OFF:Deactivate Noise Reduction. Receiving Voice/Video calls incoming call 1 An arrives The ring tone sounds. ・ P:Place the call on response hold. →P70 ■ During a voice call ・ I[Silent]: Stop the ring tone or vibration. Pressing I[Reject] Incoming voice Incoming video call screen call screen again rejects the call. *:When "Manner mode" is activated or "Incoming call vol.
・ If you subscribe to the Voice mail, Call waiting or Call forwarding service, when "Arrival call act" is set to "Answer" and "Set in-call arrival act" is set to "Activate", a tone during a call sounds if a call arrives during another call. If the tone sounds during a call, the network services are available.
Incoming Call Screen Sub Menu Incoming call screen (P67) ] M [Menu] ] 1 Perform the following operations [Voice mail]*1 Connect the incoming call to the Voice mail service center. [Call rejection] Reject an incoming call and hang up. [Call forwarding]*2 Transfer an incoming call to a specified number. *1 This is not available unless you subscribe to the Voice mail service. *2 This is not available unless you subscribed to the Call forwarding service or you have specified a forwarding number.
Close settings Incoming call volume Ending or Holding Calls by Closing the FOMA Terminal Adjusting the Ring Volume M [Menu] ] (Settings) ] "Call/VT/ Dialing" ] "Call 1 feature" ] "Close setting" ] Select conditions when the terminal is closed End the call :End the call. On Hold :Place the active call on hold. Mute :The call continues, however, your voice cannot be heard by the other party. Receiver volume The ring volume can be adjusted in 8 levels from 0 to 7.
2 When you can resume the call A or C [Release] ・ You can also cancel the hold on a Video call by pressing C [Camera]. If you press I [Substitute Image] to cancel the hold, the alternate image will be sent to the other party. ■ To terminate a voice call/Video call Press P . Note ・ The other party is charged even during a hold.
When Public mode (Drive mode) is activated Even when a call arrives to your terminal, the ringtone does not sound. appears on the Stand-by display, and the call is recorded in the Received call log. A voice guidance indicating that you are driving or you are at a location where you cannot use the terminal is played to the caller, and the call is disconnected. To deactivate Public mode (Drive mode) Press * (for 1+ seconds) in Stand-by.
Missed Call Record Message Checking Missed Calls Recording a Voice Message from a Caller When You Cannot Answer a Call If you could not answer a call, the Missed call notification screen opens on the Stand-by display. The Received calls list screen can be accessed from the icon, allowing you to check the caller. incoming call terminates 1 An The Missed call icon appears on the Stand-by display. The number of the icon represents number of missed calls.
[Answer message]* Select an answer message. ・ I You can listen to the response message. When a Call Arrives with Record Message Activated *Available when "Activate record msg." is set to "ON". 3 I [Done] Note ・ appears at the top of the screen when the Record Message is activated. ・ If the set Response time is longer than the set ringing time for the Voice mail service/Call forwarding service, a network service takes precedence.
Note ・ When "圏外" is displayed, the terminal is turned off, or "Public mode (Drive mode)" is activated, messages cannot be recorded. ・ If a call arrives when the Additional guidance is being played or when a message is being recorded in Record message, the call is rejected. Playing/Deleting Messages in Record Message [Menu] ] (LifeKit)] "Record message" ] 1M "Record msg. list" ・ I[Delete]: The selected recorded message is deleted.
Response hold image Setting the Response Hold Image [Menu] ] (Settings) ] "Call/VT/Dialing" ] 1M "Video Phone" ] "Response hold image" ] "Default"/ "Select image" ] I [Done] ・ When "Select image" is selected, press D ] C [List] in the "Select file" field and then select from the images saved in "My picture" in "Data box".
[Light] Set the talking screen's backlight level. Always on :Always stays on during a call. Terminal setting :In accord with the "Backlight" settings.→P107 [Auto redial as voice] You can set whether to automatically redial after switching to a voice call if the terminal of the other party does not support video calls. [Hand-free switch] Set whether to use Hands-free during a Video call.
Phonebook Phonebook on the FOMA Terminal・・・・・・・・・・・・・・・・・ Saving to the FOMA Terminal Phonebook ・・・・・・・・・ Saving to the UIM Phonebook ・・・・・・・・・・・・・・・・・・・・・ Saving Contacts to the Phonebook from Received or Dialed Calls ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Saving/Editing a Group Name ・・・・・・・・・・・・・・・・・・・・・ Making a Call from the Phonebook ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Search phonebook Viewing Phonebook Entries・・・・・・・・・・・・・・・・・・・・・・・・ Editing a Phonebook Entry ・・・・・・・・・・・・・・・・・・・・・・・・ Deleting Phonebook
Phonebook on the FOMA Terminal There are two Phonebooks: one is saved on the FOMA terminal (Phone) and the other is saved on the UIM. The following can be saved/set for each Phonebook. FOMA terminal Phonebook Item Number of Entries Name (Reading) Phone Number Mail Entry Address Details Group Image Other setting items UIM Phonebook Up to 1000 entries* Up to 50 1 1 5 1 3 1 31 group 1 Secret code, Ring tone, Mail tone, etc.
[ Reading] Enter or edit when necessary.Up to 32 half-pitch characters can be entered. Enter using Katakana, alphanumeric characters, or symbols. [ Phone number] Up to 26 digits can be entered. ] Enter the phone number ] Select an icon ・ You can select "International dial", "Select prefix" or "Cancel" by pressing M [Menu] on the Phone number entry screen. Press I [Cancel] to cancel the entry. [ Mail address] Up to 50 half-pitch characters can be entered. Enter using alphanumeric characters or symbols.
[ Home address] Up to 100 full-pitch or 200 half-pitch characters can be entered. Enter using Kanji, Hiragana, Pictographs, symbols, alphanumeric characters, or Katakana. [ (Secret)] This option appears when Secret mode (P121) is set to "On". Set this option to "ON" if you want to save the created Phonebook entry as secret data. [ Company name] Up to 50 full-pitch or 100 half-pitch characters can be entered. Enter using Kanji, Hiragana, Pictographs, symbols, alphanumeric characters, or Katakana.
・ When the Secret mode setting (P121) is set to "Secret data only mode", the Phonebook entry is saved as secret data. ・ The secret entry is displayed only when the "Secret mode" is set to "ON" or "Secret data only mode". ・ Secret entries cannot be saved in the UIM Phonebook. ・ The names saved in the secret entries are shown in the Redial log, history, or mail list/detail screen only when the "Secret mode" is set to "ON" or "Secret data only mode".
Saving Contacts to the Phonebook from Received or Dialed Calls You can save entries to the Phonebook from the list or detail screen of the call history, mail, or SMS that contains a phone number, mail address, or URL. Also, you can save a phone number currently being entered/displayed on the phone number entry screen or web site, etc.
Saving/Editing a Group Name You can group the contacts in the FOMA terminal Phonebook or UIM Phonebook. Up to 31 groups can be saved in the FOMA terminal Phonebook, and up to 11 groups can be saved in the UIM Phonebook (including "No group"). ・ "No group" cannot be edited. ・ Only a category name and members can be saved/edited in the UIM Phonebook.
[ Accept/Reject] Set to accept/reject calls by groups. ] Enter the Terminal security code ] "Not set"/"Reject call"/ "Accept call" *1 If you select "Display setting" either for "Select ring tone" (P98) or "Call display" (P105) and you choose movie/ i-motion with video/audio as the ring tone or call display for a specific caller, this option will be overridden and the movie/imotion will be invoked and played when a call from that caller arrives.
a Phonebook entry 2 Select The Phonebook detail screen opens with the phone number displayed. ■ When multiple phone numbers are saved in the Phonebook entry Press H to select the number to dial. ・ Press A to display the saved number in the Phone number selection screen. Use H to move the cursor to the phone number ] C [Select] to make a call. [Send] 3I ・ You can also make a call by pressing C [Display] ] C [Send] after you highlight the desired phone number on the Phonebook detail screen.
[Reading search] Enter a part of the contact name "reading", and search all Phonebook entries. Up to 32 half-pitch characters can be entered for a reading. ・ All Phonebook entries are displayed when a reading is not entered. ・ You can search readings using other than the leading character. [Memory No. search] All Phonebook entries in the FOMA terminal (phone) are displayed every 50 entries. ・ Press J to switch to the display by memory number. ・ The UIM Phonebook can not be displayed.
Sub Menu in the Phonebook List Screen a Phonebook entry 2 Select ・ When an image is assigned to the list screen (P88) ] M [Menu] ] Perform 1 Phonebook the following operations phonebook entry, it is displayed on the screen. ・ The same icon as on the Add to Phonebook screen is displayed for each item.
[Add new] Create a new Phonebook entry. →P80 [Edit] Edit the selected Phonebook entry. →P91 [Copy] Copy the selected Phonebook entry. to the UIM*1 : Copy the selected Phonebook entry to the UIM. to the phone*2 : Copy the selected Phonebook entry to the terminal. [Delete] Delete saved data from the Phonebook. Focused data : Delete the selected Phonebook entry. all in phone :Delete all Phonebook data on the terminal. all in UIM :Delete all Phonebook data saved on the UIM.
[Call function] Select the calling method. Video phone call : Make a video call. Customize call : Make a call after changing the registered phone number. Int. call (Japan) : When you make a call from overseas to a phone number in Japan saved in the phonebook, the Country Code for Japan "+81" is added automatically at the beginning of the phone number. ・ If the phone number has a leading "0", it is automatically deleted. [Edit] Edit the displayed Phonebook entry.
Deleting Phonebook entries Deleting One or All Entries Example: To delete a Phonebook entry from the Phonebook entry list screen 1 Move the cursor to the Phonebook entry on the Phonebook entry list screen (P88) ] M [Menu] ]"Delete" ] Select a deleting method Focused data : Delete the selected Phonebook entry. all in phone :Delete all Phonebook entries saved on the FOMA terminal. The security code is required to delete. all in UIM :Delete all Phonebook entries saved on the UIM.
Number of saved Phonebook entries Checking the Phonebook Capacity and Utilization You can check the available space in the terminal/UIM Phonebook. M [Menu] ] Phonebook" 1 (Phonebook&Logs) ] "No. of ・ "Secret entry" is displayed when the "Secret mode" is set to "On" or "Secret data only mode". 2 Perform the following operations: [Default mode] Set the search method to be invoked when accessing the Phonebook list screen directly from the Stand-by display.
Dialing Quick Search Making a Call with the Least Number of Buttons In Stand-by, you can enter a 1- or 2-digit memory number with dial keys from "0" to "99" to make a call to the phone number saved in the corresponding FOMA terminal Phonebook entry. If you enter a 3 or more digits, the phone numbers saved in the FOMA terminal Phonebook which contain the number sequence you entered are displayed on the screen.
Displaying the Call/Mail History [Menu] ] (Phonebook&Logs) ] [Call/Mail history] 1M ] Select the log to be displayed Received calls :Show logs for received voice/video calls. →P59 Redial : Show redial logs for voice/video calls.→P57 Received mails :Show received mail logs.→P161 Sent mails :Show the Sent mail logs.→P161 Note ・ Received mails can be accessed from the Stand-by display by pressing L. ・ Redial can be accessed from the Stand-by display by pressing R.
Sound/Screen/Light Settings Tone Settings Changing the Ring tone ・・・・・・・・・・・Select ring tone Setting the Volume of Ring Tone, Alarm, etc.
Select ring tone Changing the Ring tone You can change the ring tone for voice/video calls, mail, etc. ・ In addition to the pre-installed ring tones and melodies, i-motion movies, melodies and Chaku-Uta® songs, Chaku-Uta-Full® songs downloaded from i-mode sites or websites can be set as ring tones. [Menu] ] (Settings) ] "Sounds&Vibration" ] 1M "Select ring tone" the following operations: 2 Perform ・ C [List]: The ring tone settings screen of the selected item opens.
List of the Pre-installed Ring tones 01 ブギ・ウギ 11 Alarm01 02 ゴーゴーカート 12 Alarm02 23 Power On 24 Power Off 13 Alarm03 14 Alarm04 15 Message01 25 Ring01 26 Ring02 27 Ring03 05 ウェイティング 16 Message02 28 Ring04 03 ハワイアンド リーム 04 再会 06 彼女について 17 Message03 29 Ring05 07 桜 18 Message04 30 Ring06 08 蝶 19 Message05 31 Ring07 09 あなたとともに 20 Message06 10 ピアサー・デュ・ 21 Message07 アモーレ 22 Message08 Volume Setting the Volume of Ring Tone, Alarm, etc.
[Power On/Off] Adjust the volume of the sound when the terminal is turned on/off. [Popup tone] Adjust the volume of the sound when the popup window is displayed. [Receiver volume] Adjust the earpiece volume. It cannot be muted. * Maximize the volume to display "Step" and to increase the sound volume progressively. 3 I [Done] Note ・ Adjust the receiver volume while making a call.
Select effect tone Setting the Sound When a Key is Pressed You can set the sound effects when a key is pressed or a function is performed. 1 M [Menu] ] (Settings) ] "Sounds&Vibration" ] "Select effect tone" [Power On] Select the effect sound when the terminal is turned on. Music i-motion Melody : Select from Chaku-Uta-Full® songs saved in "Music" in the "Data box" →P217 Go to Step 3 (P214) in Setting a Chaku-Uta-Full® Song as a Ring Tone.
Quality alarm Notifying of a Call Almost Disconnected with Alarm Sound The FOMA terminal uses this function to sound an alarm tone during a voice or videophone call warning you that the signal quality is deteriorating and the call is likely to be disconnected. ・ If the signal rapidly deteriorates, the call may be disconnected without warning.
Manner mode set Changing Manner Mode Selects the action of Manner Mode from "General manner" and "Original manner mode". The setting of the set Manner mode can be changed for the Original manner mode. Example: To change the settings of the Original manner mode [Menu] ] (Settings) ] "Sounds&Vibration" ] 1M "Manner mode set" ] Move the cursor to the "Original manner" ] I [Edit] ■ To select the Manner mode type "General manner"/"Original manner" ] Press C. The Manner mode setting will terminate.
the following operations: 2 Perform ・ C [List]: List of the options for the selected item is displayed. ・ M [Preview]: The selected preview screen is displayed. [Wallpaper] Set an image to be displayed as the Wallpaper. Image : Select from images saved in "My picture" in the "Data box".→P239 i-motion : Select from videos/i-motion movies saved in "imotion" in the "Data box".
・ After you set this option, the following screen will be displayed after you press Cin Stand-by and highlight the clock ] C[OK]. - Small digital, Large digital, Analog, Alarm list screen (P267) will be displayed. - "Dual Clock" The "Time and Date settings" screen (P49) opens when you select the Home clock located in the upper part of the screen, and the "Stand-by display" screen opens when you select the Sub clock located on the lower part of the screen.
Dialing Wake-up display Setting the Display of the Dialing Screen Setting a Wake-up Display Set the screen displayed when numbers are entered in Stand-by. 1 M [Menu] ] (Settings) ] "Display" ] "Dialing" the following operations: 2 Perform ・ C [List]: List of the options for the selected item is displayed. [Motion dialing] Set the display method of the entered numbers. Digital Painting OFF : Display numbers in a digital design. : Display numbers in a painting design.
Display phonebook image Backlight Displaying an Image Saved in a Phonebook Entry on the Incoming Call Screen Setting the Back Light of the Main Display When a call with Caller ID from the caller saved in the Phonebook arrives, the image set in the Phonebook will be displayed.
Power saver mode Menu settings Using the Power Saving Mode for the Main Display Changing the Appearance of Main Menu Set the backlight brightness of the main display to the lowest level in the power saving mode. M [Menu] ] (Settings) ] "Others" ] "Power saver 1 mode" ] "ON"/"OFF" Color theme Setting a Theme for Display Colors You can select a combination of screen colors and a menu format.
■ When you do not wish to change the combination of icons Select "Color theme setting". The main menu display will be in accord with the "Color Theme setting". Menu customization terminates. cursor to an icon to change ] C [Change] ] 2 Move Select a new icon ] I [Done] ] "Yes" Select an icon from images saved in "My picture" in the "Data box". ■ To cancel changing of the icons Select "No" on the confirmation screen for saving.
Lighting LED Setting Incoming Lighting/ Blinking Colors or Patterns You can set the incoming or alarm illumination to ON or OFF, or set a combination of illumination colors for each item. 1 M [Menu] ] (Settings) ] "Display" ] "Lighting LED" Perform the following operations: 2 ・ C [List]: List of the options for the selected item is displayed. [Lighting] Set whether to light/blink the illumination light. [Incoming voice call]* Set an illumination pattern/color for an incoming voice call.
Font size Date&Time format Changing the Font Size Setting the Time Format You can change the font size for menu items, Phonebook entries, Redial/Received calls, Sent mail/Received mail, mail list/detail screen, i-mode, and characters being entered. You can set the display format for date/time.
Select language Switching the Display Language to English You can switch the language of the displayed on the FOMA terminal between Japanese and English. [Menu] ] (Settings) ] "Others" ] "バイリンガル" ] 1M "日本語"/"English" Note ・ When set to English, "Select language" is displayed as "バイリンガル (Bilingual)" ・ The setting of this function is recorded on the UIM. If another UIM is inserted into the phone, the setting on another UIM has priority.
Security Settings Passwords Passwords ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Changing the Security Code Change Security code Setting the PIN codes ・・・・・・・・・・・・・・・・・・ PIN code Unblocking a Blocked PIN ・・・・・・・・・・・・・・・・・・・・・・・・・ 114 116 116 117 126 127 127 Other "Security Settings" Other "Security Settings" ・・・・・・・・・・・・・・・・・・・・・・・・・ Restricting Terminal Operations Lock Functions ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Locking the Terminal to Prevent Use by Others ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
Passwords Some functions of the FOMA terminal require a password. In addition to the Security Code, there are the network security code and the i-mode Password. These passwords help you utilize your terminal. ・ Entered security code, network security code, and i-mode password are displayed as "*". Warning about Passwords ・Avoid setting a password using your birthday, a part of your phone number, your address or room number, 1111 or 1234, that can be easily guessed by others.
i-mode Password The 4-digit "i-mode password" is required to add/remove from my menu, or change message service, fee based i-mode services or cancellation. (Some other information service providers may set passwords for their sites) The i-mode password is set to "0000" by default, however, you can change it at any time. Access "iMenu" ] "ENGLISH" ] "Options" ] "Change i-mode Password" if you are using i-mode. PIN1/PIN2 codes You can assign PIN1 and PIN2 codes to the UIM.
Change Security code Changing the Security Code The security code can be changed. 1 M[Menu] ] (Settings) ] "Lock/ Security" ] "Change Security code" Enter the current security code 2 The Change Security code screen opens. 3 4 Enter a new security code Enter the Security code you entered in Step 3 again.
Unblocking a Blocked PIN If you enter an incorrect PIN1/PIN2 code three times in a row and the PIN lock screen opens, enter the PIN unblock code to cancel the lock. ・ You need to set a new PIN 1/PIN2 code after unblocking the PIN code. Lock Functions Lock Function Lock all Lock the terminal to prevent unauthorized use. P117 Call/Mail lock To prevent unauthorized use of the FOMA terminal, you can disable making calls, entering an address with dial keys, answering calls, or displaying mail.
Lock all Locking the Terminal to Prevent Use by Others Disabling Making/Receiving Calls Call/Mail lock You can lock the terminal to prevent anyone from using it. ・ When Lock all is activated, the only operations you can perform are turning power On/Off, making emergency calls, answering Incoming voice/video calls, and canceling Lock all.
[Send mail lock]* Disable the following operations. ・ Entering a mail address with dial keys ・ Sending mail to an address in the redial or received call log (while allowing mail to an address saved in the Phonebook) ・ Performing data communications connecting to a PC, etc. ・ Saving, editing, or deleting Phonebook entries (including sending or receiving via infrared communication) [Incoming call lock]* Disable incoming calls.
[Data access Lock set] Set whether to activate the Data access lock. After setting the Data access lock, the security code is required to use the selected functions. [Phonebook]* The Phonebook can not be used until the Security code is entered. ・ In the Redial list or logs, the phone number or mail address sent by the caller/sender will be displayed instead of the name saved in the Phonebook. ・ Receiving Phonebook entries using infrared communication becomes unavailable.
Display call/mail logs Secret mode Setting Redial/Received Call Log Display Displaying Secret Data You can disable display of redial, received call, sent mail, and received mail logs. M[Menu] ] (Settings) ]"Lock/ Security" ] "Display call/mail logs" ] Enter the security code 1 Perform the following operations: 2 The items set to "OFF" will not be displayed. ・ C[List]: List of items is displayed. [Redial logs] Set whether to display the redial list.
Saving a Phone Number to Reject You can register up to 20 phone numbers to be rejected. 1 M[Menu] ] (Settings) ] "Call/VT/ Dialing" ] "Incoming call" ] "Accept/Reject call" ] Enter the security code ] "Accept/ Reject set" ] Move to the cursor to "Reject on list" ] I[List] ] I[Add] [Reject number] Specify the phone number to reject. ・ M[Search]: Search and set a phone number from the Phonebook. The name saved in the Phonebook is displayed on the list. ・ C[Select]: Enter and set a phone number.
Reject all calls Setting the Reject on List 1 M[Menu] ] (Settings) ] "Call/VT/Dialing" ] "Incoming call" ] "Accept/Reject call" ] Enter the security code ] "Accept/Reject set" ] "Reject on list" Rejecting All Incoming Calls You can mute the ring tone for all incoming calls or disconnect calls before incoming call actions take place. ■ To Release Select "Accept" on the "Accept/Reject call" screen.
Anonymous caller Setting Actions When Calls Arrive from Unknown Callers You can set whether to accept or reject calls without Caller ID per reason for no Caller ID. 1 M[Menu] ] (Settings) ] "Call/VT/ Dialing" ] "Incoming call " ] "Anonymous caller" ] Enter the security code the following operations: 2 ・Perform C[List]: List of items is displayed. [User unset] Set options for calls without Caller ID because the caller chose not to send Caller ID. Disable :Cancel the setting. Reject call :Reject a call.
Note ・ When User unset is activated, if a call without Caller ID set to be rejected arrives, the call will not be indicated, is displayed on the Stand-by screen, and the call is recorded in Received call log as a missed call. The other party hears a busy signal. Calls are rejected even when the Voice mail or Call forwarding service is activated. However, if Ringing Time is set to 0 second or the FOMA terminal is out of service area or turned off, network services start.
Note ・ When a relevant caller calls while this function is activated, incoming call actions, such as sounding the ring tone, will not take place for the set time; however, the Incoming call screen opens. ・ This option works even when Secret mode is set enabled and a call from a caller whose Phonebook entry is set as secret arrives. ・ If the Ring Delay is set longer than the response time of the Voice mail/Call forwarding service, network services start without the ringing action.
PIM data Reset/Clear Restoring Various Function Settings to Their Defaults You can restore the settings of various functions to the defaults. ・ For functions that can be restored to the defaults, see the "Menu List" (P346). 1 M [Menu]] (Settings) ]"Others"]"Reset/ Clear" ]"Reset settings"]"Yes" ] Enter the security code. Note ・ Perform "Reset settings" only when the battery level is sufficient to complete the task.
Function name/ Service name Other "Security Settings" In addition to the security functions described in this chapter, the following functions and services are available.
Mail What is i-mode Mail? ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Displaying the Mail Menu ・・・・・・・・・・・・・・ Mail Menu 130 130 Creating i-mode Mail/Deco-mail Creating and Sending i-mode Mail ・・・・・・・・・・・・・・・・・ Creating and sending i-mode mail Creating and Sending Deco-mail ・・・・・・・・ Deco-mail Decorating the Text ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Creating Deco-mail Using a Template ・・ Template Attaching a File ・・・・・・・・・・・・・・・・・・・・・・・ Attach file Displaying Mail in Inbox/Outbox or Unsent Messages ・・・・・・・・・・・・・・・・・・ Inbox/O
[Inbox] Display the received mail folder list screen.→P148 What is i-mode Mail? Upon subscription to i-mode, you can send and receive email via the Internet, as well as between i-mode terminal. In addition to the message text, a total of 2MB in 10 files (JPEG, etc.) can be attached. Also, i-mode mail can be decorated by changing the font color, size, or background color of the message text.
Creating and sending i-mode mail Creating and Sending i-mode Mail 1 The Stand-by display ] g ]"Compose message" Receiver Subject Message The total number of bytes of characters and decoration in the message text Compose i-mode mail screen 2 Select address (Receiver) field ] "Direct input" ] Enter the ・ Up to 50 half-pitch characters can be entered.
i-mode Mail Creation Screen Sub Menu 1 i-mode mail creation screen(P131) ] M[Menu] ] Perform the following operations: [Send] Send mail. [Preview] Display a preview of the mail to be sent. [Save] Save mail that is being created or edited as unsent mail. [Add address] Send mail to several addresses Up to five addresses can be added. Sent address:Select an address from the Sent mail logs. Rcv. address:Select an address from the Received mail logs. Open phonebook:Select an address from the phonebook.
Message Text Entry Screen Sub Menu 1 Message text entry screen(P131) ] M[Menu] ] Perform the following operations: [Decorate mail] Open the palette to select the decoration to Deco-mail (Decoration).→P135 [Range choice] Specify the range of text to decorate. Go to Step 2 in "Changing Decoration"(P137). ・ This option cannot be selected when no text has been entered in the message. [Common phrases] Enter or edit Common phrases.
Deco-mail Creating and Sending Deco-mail You can create your own designed mail by adding decorations such as changing font size, font color or background color, or inserting images while editing an i-mode mail message. ・ Deco-mail up to 100KB can be sent. ・ Up to 20 images within 90KB can be inserted. ・ When a Deco-mail non-compatible terminal receives a Deco-mail, the mail contains a URL to browse or the message with only text will be shown in some Deco-mail incompatible terminals.
Decorating the Text 1 Message text entry screen (P131) ] M[Menu] ] "Decorate mail" ] Perform the following operations: ・ I[Body]: Switch from palette functions to character entry. [ (Background color)] Set a background color of the message text. [ (Blink)] Make characters blink. ・ To finish entering characters that blink, select End). [ (Ticker)] Set a ticker to the text. ・ Characters entered between and appear as a ticker. ・ To finish entering characters to be the ticker, select (Ticker : End).
[ (Copy)] Specify the range and copy text, an image, or a line. ] Use K to select the start point ] Use K to select the end point [ (Cut)] Specify the range and cut text, an image, or a line. ] Use K to select the start point ] Use K to select the end point [ (Paste)] Paste the copied or cut data after the cursor. [ (Copy decoration)] Copy all decorations set to the line at the cursor. [ (Paste decoration)] After copying decorations using "Copy Decoration", you can paste them in the line at the cursor.
Template Changing Decoration 1 Mail Message text entry screen(P131) ] M [Menu] ] "Decorate mail" ] Select (Edit decoration) Use K to specify the start point 2 ・ I[SelAll]: Select the entire message. K to select the end point ] Select Decoration 3 ・Use Operate Decoration→P135 Creating Deco-mail Using a Template Templates are form data for Deco-mail with decorations such as the font size and image insertion already set.
Creating a New Template Create user-defined templates. Created templates are saved in the "Template" of Mail menu. 1 The Stand-by display ] g] "Template" ] M[Menu] ] "New template" Editing Templates You can edit user-defined templates. 1 The Stand-by display ] g ] "Template" Templates 2 ・Creating Decorating operations→P135 3 After creating a Template ] C[Set] ] C[Select] ] Edit the title ] I[Done] Template list screen Note ・ Undecorated text cannot be saved as a template.
Template list screen sub menu 1 Template list screen (P138) ] Move the cursor to a template ] M[Menu] ] Perform the following operations: [New template] Create a new template.→P138 [Edit template] Edit the selected template.→P138 [Edit title] Edit the title of the selected template. [Info] Display the selected template's properties. [Sort] Display the properties of the selected template. [Delete] Delete one:Delete the selected template. Del. selected:Select and delete templates.
[Attach file] Image:Select from images saved in "My picture" of the "Data box". ] Move the cursor to the folder ] C[Open] ] Select an image Movie:Select from videos/i-motion movies saved in "imotion" of the "Data box". ] Move the cursor to folder ] C[Open] ] Select a movie Melody:Select from melodies saved in "Melody" of the "Data box". ] Move the cursor to folder ] C[Open] ] Select a melody Phonebook:Select a Phonebook entry. Calendar:Select a schedule event saved in the FOMA Terminal.
Automatic Reception of Mail When i-mode Mail is Received When the FOMA terminal is in the service area, i-mode mail is automatically sent from the i-mode Center. 1 After the i-mode mail is received, appears at the top of the screen When the reception is completed, the Reception result screen opens. ・ The previous screen returns if no operation is performed for approximately 30 seconds. ・ Selecting "Mail" opens the Inbox list screen.
・ When mail is kept at the i-mode Center, or appears. When the terminal power is off or the terminal is out of service area, these icons may not be displayed even there is i-mode mail at the i-mode Center. ・ If multiple i-mode mail messages or Message R/F are received concurrently, the ring tone set to the i-mode mail or Message R/F received the last sounds.
Note ・ Set "Receive option" to "OFF" in "Receive option set" (P162). If i-mode mail arrives when the Receive option is set 1 Setting the Receive Option for i-mode Mail After "Receive option" is set to "ON", perform the following steps to select and receive i-mode mail: The Stand-by display ] g ] "Receive option" 1 For subsequent steps, see "Mobile Phone User's Guide [i-mode] FOMA version".
Check new message Replying to i-mode Mail Checking for New i-mode Mail Replying to i-mode Mail i-mode mail that could not be received because the FOMA terminal was out of service area or from other reasons are stored in the i-mode Center. You can receive stored i-mode mail by checking to the i-mode Center. ・ appears at the top of the screen when mail is kept at the i-mode Center. ・ You can select items to check (mail or Message R/F) under "Check new messages" (P162).
Forwarding i-mode Mail Forwarding i-mode Mail to Another Receiver Registering Mail Addresses/ Phone Numbers to the Phonebook You can forward received i-mode mail to another receiver. You can save mail addresses/phone numbers from mail to the Phonebook. 1 Received mail detail screen (P148) ] M[Menu] ] "Forward" the receiver 2 ・Enter "Fw:" is added to the subject. To register an address/phone number from the message text 1 ・ Editing the receiver and message text (P131).
Playing/Saving an Attached File from i-mode Mail You can play or save an image, melody, video or i-motion movie attached or pasted to i-mode mail. Retrieve Selected Attached File When the size of a received message including attachments exceeds 100 KB, you will need to download the attachments from the i-mode Center. ・ All the attached files selected are downloaded regardless of the setting of "Receive attach file" option in "Mail setting" of "Communication". ・ Expired files cannot be downloaded.
Note ・ Large i-mode mail may be rejected by the i-mode Center, and an error message may be returned to the source address. ・ i-mode mail that is 100KB (with attachments included) or smaller can be automatically downloaded. Attachments larger than 100KB can be manually downloaded from the i-mode center. ・ Set a size limit for i-mode mail messages in advance. ・ An image that is larger than the screen is reduced and displayed. ・ Some images, videos/i-motion movies may not be displayed or played.