User's Manual

107
106
Connection Menu 9.6
Network Selection (Menu 9.6.1)
The Network Selection feature enables you to indicate whether the network
used when roaming(outside your home area) is selected Automatic,
Manual, and Preferred.
Automatic
Allows you to set the phone to automatically search for and select one of
the cellular networks available in your area.
The phone will be set to Automatic even though the power is off and on.
Manual
Allows you to select the desired network manually from a list of networks.
If the connection to the manually selected network is lost, the phone will
sound an error tone and ask you to select a network again. The selected
network must have a roaming agreement with your home network, that is,
the operator whose SIM card is in your phone. The phone lets you select
another network if the phone fails to access the selected network. If you
switch off the phone, the phone will be reset to Automatic.
Preferred
You can set a list of preferred networks the handset should attempt to
register with first, before attempting to register to any other networks. This
list is created from the handset’s predefined list of known networks.
World Phone (Menu 9.6.2)
GPRS Attach (Menu 9.6.3)
If you select Power On and you are in a network that supports packet data,
the phone registers to the GPRS network and sending short messages will
be done via GPRS. Also, starting an active packet data connection, for
example, to send and receive e-mail, is quicker. If you select When
Needed, the phone will use a packet data connection only if you start an
application or action that needs it. The GPRS connection is closed after it
is not used by any application.
Access Point (Menu 9.6.4)
Reset Access Point (Menu 9.6.5)
This allows Profile information to be restored to original setting. For
example, this option will restore the Profile that has been deleted by the
Delete All selection from the Access Point (Menu 3.4) submenu.
Reset Setting Menu 9.7
You can easily reset your phone to its default configuration. To do so,
proceed, as follows.
1. Select the Reset Settings menu option.
2. Enter the 4-digit phone password.
Note I
f there is no GPRS coverage and you have chosen Power on, the
phone will periodically try to establish a packet data connection.
Note You can select a network other than your home network only if it has a
valid roaming agreement with your home network.
SettingsSettings
Note
The password is preset to 0000.