User Manual

Getting Started
20
Getting Started
Attention:
] Avoid using the Flash Memory Card when
the battery is low.
] When writing to the card, wait for the
operation to complete before removing the
card.
] The card is designed to fit easily into the
system one way only.
] Do not bend the card or force it into the slot.
] Do not insert any other kind of memory
cards different from microSD.
For more information on the microSD, please
refer to the instructions manual of the
memory card.
Memory card formatting
Before start using memory card it's necessary
to format it. After you insert memory card,
select Menu > Settings > Phone settings >
Memory status > Format external memory,
then press OK. This operation should be
done only when you insert memory card for
the first time. During formatting various
folders will be created for different data
types.
Turning the handset
on/off
Turning your handset on
Ensure that your USIM card is in your
handset and the battery is charged. Press and
hold the key until power is on. Enter the
USIM PIN code that was supplied with your
USIM card if PIN code setting is on.
After a few seconds you will be registered on
the network.
Turning your handset off
Press and hold the key until power is off.
There may be a few seconds delay while the
handset powers down.
Do not re-power the handset during this
time.