User Manual

Settings
Security (Menu #.1.4)
PIN code request (Menu #.1.4.1)
When this is set to On, you are requested to
enter your PIN each time you switch the
phone on.
Handset lock (Menu #.1.4.2)
You can lock your phone. The following 4
lock functions are available.
When switching on: Locks the handset
whenever the handset is switched on.
If USIM changed: Locks the handset when
the phone's USIM card has been changed.
Immediate: Locks the handset immediately.
None: Deactivates lock function.
You are requested to the security code to
confirm the selection.
] To unlock the handset, you need to enter
the security code.
Change password (Menu #.1.4.3)
You can change PIN, PIN2, the mobile phone
password and the call barring password.
PIN code
PIN is the abbreviation of Personal
Identification Number, and is used to restrict
the use of an unauthenticated user.
77
Note
] Press the key in the PIN code
input window to return to the previous
step.
] 3 incorrect PIN code entries would
invalidate the PIN code. And you have to
input the PUK (PIN Unblock Key) code
to configure the PIN code again.
] The maximum allowed number of
attempts of PUK input is 10 times.
(Attention: After having entered 10 times
an incorrect PUK code, the USIM card
will blocked and must be replaced.)
] If the PIN code request cannot be
disabled by operator settings, you will
not be able to choose this menu item.