User Manual

Settings
84
Settings
Fixed dial numbers (Menu #.5.3)
1. To enter the menu allowing FDN
configuration, PIN authentication is
required.
2. The first menu displays the activate status.
Enter activation menu through OK key.
3. The second menu displays the current
number.
4. For configuration, input name and phone
number. The configuration information is
saved in USIM.
5. The information saved in USIM is used
when FDN restricts outgoing calls.
Data volume (Menu #.5.4)
Allows you to check the sent, received and all
data volume transferred.
Press the left soft key [Options] to choose
for partial initialization or entire initialization.
You can also use the right soft key [Clear]
for the initialization of the selected volume
type. Initialization will require your Security
code.
Call costs (Menu #.5.5)
1. This function displays your call cost of the
Last call and All calls.
2. To initialise, press ‘Clear’ button, and input
PIN2 code.
3. You can select either Unit or Currency in
Set call cost. According to your setting,
call cost is displayed during a call (If USIM
and Network support Advice Of
Charge(AOC)).
4. In the Set limit configuration, select On to
configure the cost limit. When cost limit is
configured, and call cost reaches the limit,
making a call will not be allowed.
Diverts (Menu #.5.6)
Call divert menus for voice and video calls
are provided.
However, available menus are determined by
the USIM supporting CPHS.
The menu consists of Voice calls, Video calls
and Deactivate all.|