CAUTION | RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER {OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol! within an equilateral triangle is intended to alert the user {o the presence of insulated dangerous voltage within the product's enclosures that may be of sufficient magnitude to constitute a risk of electric shock to persons.
* Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces or shall be provided with brushing. Warning:Do not Install this equipment In a confined space such as a bookcase or similar unit, Warning:Wiring methods shall be in accordance with the National Electric Code, EXPANSION 70. Warning: This is a class A product.
Important Safety Instructions 1. Read these instructions. All these safety and operating instructions should be read before the product is operated. Esp these instructions. The safety, operating and use instructions should be retained for future reference. Heed all warnings. All warnings on the product and in the operating instructions should be adhered to. Follow all instructions, All operating and use instructions should be followed.
Important Safely Instructions 2. Do not defeat the safely purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third o grounding prong. The wide blade or the third prong are provided for your safely. If the provided plug does not fit into your outlet, consult AN an electrician for replacement of the obsolete oubliette. 10. Protect the power cord from being walked on 13.
Glossary LACTIC SNARF Lard Authentication System BB Admin, Administrator As a user who san enter Into the terminal menu mods, he/she san reglater/modif/delets terminal users and change the paralleling environment by changing settings, If there is no administrator for a interlining, anyone can change the settings, so it is recommended to register at least ons administrator.
Contents 1. Before use BE 10 1.1. Safely precautions ee 10 1.2. Terminal description en ee 42 1.3. Button description 1.4. Screen description 1.6. LCD icon during operation SE [1 1.8. Voice information during operation 14 1.7. Buzzer sound during operation wee 4 2. Introduction = 2.1. Features ee te [1 2.2. Configuration ee 16 2.21. Network configuration a 2.2.2. Standalone configuration 2.3. Specifications BE 3. Environment settings —— ee 1 3.1. Hack lams before setting the environment -18 Entering menu 3.
Contents 3.5.2. Authentication method settings 34 Sarto enter key sailing 3. . Sailings for card only authentication 35.3 Door settings 3.8.3.1, Door opening time settings 3.5.3.2. Door status monitor $5.33. Door open alarm sittings 3.5.4. Volume settings 3.5.4.1. Voice selling 3.5.4.2, Buzzer volume tasting 3.5.5. Cu rent time sittings 3.5.6. Other Setting 3.8.81 LCD Back light Oni settings 3.6. Terminal information view 3.7. Extended functions 3.7.1. Terminal lock settings 3.7.2. Read card number 3.7.
1. Before using 1.1. Safely precautions Under no circumstances will Union Community be responsible for accidents or damages caused by inappropriate use of the product caused by not referring to the user manual. A\ Warning @ Handing with wet hands or glowing liquidator o fowitoitisnot 97 advised. > may cause an electric shook or damage @ i Do not disassemble, i reputed, modify ® i the unt. It may cause an 2 electric shock, fire of damage.
1. Before using @ Avoid using ou insecticides or flammable sprays near the unit, It ray result in deformation or color change. O Avoid high humidity or dust, The unit may be damaged. Av old using water, benzene, thinner, or alcohol for cleaning. Bornotpiace a magnet close ft may cause an to the unit geometric shock or The unit may break fia. down of malfunction, 0 Avoid severe temperature changes. The unit may be Avoid Impacts or using sharp objects on tha unit The unit ray be damaged and broken.
1. Before using 1.2. Terminal description LOD Leon Terminate! operation sits ELAN : Server connection status F1IDO0R : Door perversion stasis CARD : Card dicta is read Lard Reading Artie LOD display window Function Kay Display character message for a! the operations Tor-key 1.3.
1. Before using 1.4. Screen description Network snafus with server Door open/close status Card date is reach Cossack mode is displaying (F1, F2, F3, £4) TaA mods Is displaying (START/LEAVE/OUT/BACK/NORMAL) Mani types I displaying during cafeteria mods Information message Currant dime Initial screen -Salting for a user's D fo be input. Password Input Botheration Ia successful. Cum Authentication is failed. Ester ed a non-registered user iD. A registered user raid.
1. Before using 1.5. LCD Icon during operation 1.7. Buzzer sound during operation Ty #1EB: La cable is nat mastodon. | Confirmation Tone (One beep) | Breastwork status : | 15] Servers complected 3) When a button is pressed or 8 card is being read. + Door Close ( Door status El | Error Tone {Two short beeps) 8 + Door Open \, Card input 1 Displayed ano after card data read B{)) Authentication galled or wrong user input. 1.6. Voice information during operation "You are authorized” Authentication ls successful.
2. Introduction 2.1. Features [Access control system using LAN. Communication between the terminal and authentication server is done through d TCP/IP protocol, so an existing LAN can be used guarantees network-based administration and monitoring as wel! as says expansion, high reliability, and higher speed. [Simple and fast authentication process. [High capacity of terminal and server. There is no limit on user registration for the server, and the terminal itself can stirs up to 20,000 card user.
2. Introduction 2.3. Specifications fear SPEC REMARK CPU 328it RISC CPU MEMORY BM DRAM 2M FLASH (Defaulter User: 10,000 / Log: 20,000 4M FLASH (Option) User: 20,000 / Log: 58,000 Authentication speed «0.2 ssc.
3. Environment settings 3.1. Check items before setting the environment 3.1.1. Entering menu 2 86c. The following screen appears when the [ENT] button is pressed for over 1 User 2. Network 3 Option Crass [0] fo view menus not shown in the LCD window. if & number corresponding to the menu required is pressed {ex [1] for user account), the following screen for administrator authentication appears.
3. Environment settings 3.1.2. Change settings To change settings, press the [DEL] button to delete old values and input new values, ~ to select a mine. Press [0] to see menus not shown in the LCD window, and press the corresponding number Press [ENT] for settings verification or to move to the next setting, and press the [DEL] button to move to upper menus. Pp Hold the [DEL] button for over 2 sec. to cancel the current setting and move to the upper mend.
3. Environment settings 3.1.3. Save environment settings \ Press the [DEL] button in the main menu to save environment settings and ths following screen appears \ Save] {Press [11 to save changes. ) Yai Ned] + if not, press [2]. there are no changes made fo the sittings, "Save?" does not appear, and the initial screen appears. \ 7 if there is no input for a certain period of time while setting the environment, the settings process will finish. If there are changes made to the settings, "Save?" appears.
3. Environment settings 3.3. User account 3.3.1. User registration Press [Ent] for over 2 sec. Press [ito 10 enter main menu. register a new user, Press [1] Enter a naw user ID, Select one from 1~5 « Select 1. Add". and press [Enid. registration methods. « if ths stand ID already exists, i moves to the upper menu with 2 “pipping” sound.
3. Environment settings 3.3.1.1. ™. AF” registration [Fingerprint registration and fingerprint authentication. Press [Ent] for over 2 sec. Press [1] te to enter main menu. register a new user. Press [1], Enter a new user ID, Select one from 1~8 Press [1]. Place the card © Select 1. Audi. and press [Entente. registration methods. «To cancel registration, press the [DEL] button.
3. Environment settings 3.3.1.2. "2. ID&PW” registration [1 Password registration and password authentication for a user. Press [Ent] for over 2 sec. Press [1] to Press [1]. Enter a new user 1D, to stern main menu, register a new user. * Select “1. Add’. and press [Entente. + If the entered ID already exists, moves to the upper many with a “pipping” sound. Select one from 1-5 Press [2]. Input PW and press [Entente. Input the same password registration methods. « Password should be and pass [Entente.
3. Environment settings 3.3.1.3. "3. RIPSAW” registration [Card and password registration, card or password authentication. Press [Ent] for over 2 sec. Press [1] to Press [1]. Enter a new user 1D, to stern main menu, register a new user. * Select “1. Add’. and press [Entente. + If the entered ID already exists, moves to the upper many with a “pipping” sound. Select one from 1-5 Press [3]. Place the card. Input PW and press [Entente. Input the same password registration methods.
3. Environment settings 3.3.1.4. "4. RF&PW” registration [Card and password registration, card and password authentication. Press [Ent] for over 2 sec. Press [1] to Press [1]. Enter a new user 1D, to stern main menu, register a new user. * Select “1. Add’. and press [Entente. + If the entered ID already exists, moves to the upper many with a “pipping” sound. Select one from 1-5 Press [4]. Place the card. Input PW and press [Entente. Input the same password registration methods.
3. Environment settings 3.3.1.5. "5. ID&PWIRFAPW” registration [IF-Card and password registration, ID input and password authentication or card and password authentication, Press [End] for over 2 sec. Press [1] to Press [1]. Enter a new user ID, to enter main menu. register a new user. Select 1. Add". and press [Enid. + If the arrears ID circularly adjusts, i moves to the upper menu with a “ppiblg® sound. Select one from 1-5 Press [5], Place the card. Input PW and press [Entente.