4. How to use 4.4.2. [1:1] fingerprint authentication [When auto sensing is running, input ‘0001° if the user ID is ‘0001° and then place your finger clods fo the fingerprint sensor. The light on the fingerprint input window tums on io detect the fingerprint and the authentication result is displayed on the LCD window. [J if the user 1D Is ‘0001’, Input ‘0001’ and press the function kay. Solos Information like "please enter your fingerprint” folios.
4. How to use 4.1.3. [1:N] fingerprint authentication [This authentication is allowed only for users who are registered as 1:N authentication setting. 171f a user places phisher finger clods to the fingerprint sensor when auto sensing is running, the light on the fingerprint input window turns on to detect the fingerprint and the authentication result is displayed on the LCD window. {When you press the function key, voice information like “please enter your fingerprint” ‘follows.
4. How to use 4.1.4. Password authentication [11 the user 1D is 00071", input ‘0001 and press the function key. The terminal waits for the user password to be inputted after a “pinprick” buzzer sound. Inuit the relevant password and press [ENTER]. The authentication result appears on the LCD. If the user iD) Is ‘0001, enter ‘0001 and press the function key. | 1) The terminal alts for ths user password to ba inputted after a “spirited” buzzer sound. Infant the relevant | password and press [ENTER].
. How to use 4.1.5. Card authentication [Jin case of a user who is registered as [RF], [FIFER] or [RFIPW], place the card class fo the terminal in main screen. After a “ppig® buzzer sound, the authentication result appears on the LCD. Place your card close to the seminal. i makes a “pig” buzzer sound. o Wf authentication ts Successively doe, & Succors Massage 1s dap ayes on the LOD together with a voles message “You ans authorized”.
4. How to use 4.1.8. User ID group authentication [User I group authentication is performed just among users grouped with same first digit and/or above of user 1D at last one digit. This authentication can conveniently be used if there are too many users and the matching time for 1:N authentication takes too long. In the menu, sot as below: 3. Option £3 2. Verily option enables TN £3 riser ID Groups=1.
4. How to use 4.4.7. Multiple fingerprint authentication [For a door where higher securely is required, multiple fingerprints captured from more than wo parsons are assigned fo a single ID for access to the specific door. The door opens only when all the registered fingerprints are successfully authenticated. In the menu, set as below: 3. Option £32.
4. How to use 4.2. Time & Attendance control [1 Default screen Option £2 [1] Application £3 [1] T&A (Time Attendance) settings [Of start and eave time for employees are fixed, sot stasis Timex, cleavage time> and «normal Rime: to reduce user input errors. 4.2.1.
4. How to use 4.2.2. Expansion of working mode by multi-key function [11 more than 5 working modes start, leave, outside work (out), return (back) and normal ave required, it can be expanded up to 41 modes. [J After selling Menu £2 option 3 1 Application £31] T&A, sel more than one key to ‘Din setting. The keys set to X’ are not applied in this multi-key function. [IAs a mode Is defined as a function key plus a number key, press a number key after pressing the function key for authentication.
4. How to use 4.3. For using as meal management system [7 Default screen Option £31] Application £2 [2] Setting up to meal [When sating up meal management, a user must input af least one meantime because the terminal is locked except for mealtimes. [1 Each user can authentically only once for aah mea! and mullions authentications are not allowed, but multiples authentications by using [ENTER] key are allowed.
4. How to use 4.3.2. [1:1] Fingerprint authentication [Same as 4.1.2. but [ENTER] key is not available 4.3.3. [1:N] Fingerprint authentication [edamame as 4.1.3, but [ENTER] 4.3.4. Password authentication [Same as 4.1.4. but [ENTER] key is not available 4.3.5. Card authentication [Same as 4.1.5. but [ENTER] key is not available 4.3.8. User ID group authentication [Same as 4.1.8.
4. How to use 4.3.7. Allowing multiple authentications [Default screen £3 [ENTER] £3 6] Device settings £3 [1] Function key £3 Must be sifting as on