3. Configuration settings 3.3.5. Delete All Users Press for over 2 sec. Press [1] to Press 5} to enter main menu. register a new user. «Te delete al users, press [1], « if succeeds, it deletes all, if not, press [2]. if daily, if returns fo the ‘5. Delete Alf screen, J Special care is ironclad because all User unsocial including the administrator are desisted with hie operation.
3. Configuration settings 3.4. Network settings [in the main menu, press [2] to sectarian 2 Network io see the following screen. When this selling is done, press [ENTER] to move to the next setting. 3.4.1. Terminal ID Default screen £3 £518) = This ID is unique for sate terminal and used by an authentication server to distinguish sate terminal. The default is + reds [ENTER marvels ot should be identical fo the door 1D set in the server program "a and its length should be 1-8 characters.
. Configuration settings 3.4.3. Connection method Default screen £34] £32] £2 [ENTER] CENTER] = Press [0] for Static IP, the defaults 0". » Press [1] for CPD. : a TEE For static IP stings, refer to 3.4.4. IP address’, Subset mask’ and Gateway In case of dynamic IP, there is no need for additional settings. 3.4.4. IP address = Crass io dells an old IP and enter the new IP. « If the IP address is penis as below: [010] [51 10} « Press [ENTER] to move to the ne setting. 34.5.
3. Configuration settings 3.4. Network settings 3.4.6. Gateway + Press to dells an oid value and enter the new value. «If the gateway |P address is 210.88.100.1', enter as below: {211} fol Fran [ENTER] fo move he next setting. 34.7. Server IP = Press to delete an old value and enter the new value. = If the sever address is ‘210.88.100. 127°, enter as below: [oO] Rags [ENTER] bs move fo ho nat setting. 3.4.8. Server port + Press to delete an oid value and enter the new value.
3. Configuration settings 3.5. Option settings 3.5.1. Application mode Data ult screen $3 [+3 B11) «The default is ‘activeness Calif’ « For access control application, set as ‘0’. For time & attendance, set as 1". + Access control There are no details settings under access control application here. if moves to the upper menu.
3. Configuration settings 3.5.2. Option settings for authentication Default screen £2[4 $331 822) = To set the basic option for authentication, press [2]. 3.5.2.1. Settings for ID display when authentication is successful « Default siting gst to the default setting ‘OF, only the ‘Success’ message is displayed. If it is set io 'Y', user ID is displayed in the LCD « Crass [ENTER] t move 13 window when authentication is successful as shown below: the nex sting. (Ex) OKI <0001> 3.5.2.
3. Configuration settings 3.5.2.3. 1:N authentication settings « fair the sting is compatibly dons, press [ENTER] io mow 1 the upper menu. 48 Default screen £34 £313] £3 [2] € [ENTER] £3 [ENTER] « Default setting « 1 = This enables fingerprint authentication without inputting a user ID or placing a card.
3. Configuration settings 3.5.3. Door lock Default screen 5131 = Press [3] for door settings. 3.8.3.1, Door opening time Default screen Default setting : ‘03 (unit: sac) + This Is used to set the door opening time after authentication Is . earn successfully done. This means the door opening time only for ts ho ta strike types but Is not applicable to dead bolt types or auto door. « If this Is set to ‘OF, the door control in access control mode Is out of control.
3. Configuration settings 3.5.3.3. Door open alarm Default screen [ENTER] [ENTER] = Default setting : ‘00° «For smoothly operation of this settling, the relevant luck should be the lock types to be albs to « Ores the sling ls compete | monitor whether the door is ops or closed and its monitoring pin should proper be connected the terminal. Tha previously mentioned setting for monitoring door status should be set for this operation, 3.5.4. Volume Data screen £3 €2[3] = Press [4] for volume settings. 3.54.1.
3. Configuration settings 3.54.3. Case open alarm Default screen [ENTER] £3 [ENTER] « Default sating alarm sounds if the terminal case is damaged or opened. For = Tier thin bating is completely {hig setting, VERDI 4000 series have case open sensor installed. done, press [ENTER] to move the nest sating. 3.5.5. Current time Data ult screen £315] «This is to sat the terminal current time. The above example represents the year 2009, month 8, tads 25, hour 21, min. « Prose [Enter recheck that 18, and sec, 08.
3. Configuration settings 3.8. Terminal information view Default screen Press [0] to scroll up and down the scrawny.
3. Configuration settings 3.7. Extra functions [in the main many, press [5] to select ‘5 Ext function’ and the following scream appears: 3.7.1. Terminal lock Default screen Default setting ‘0 : Releasing terminal lock 4" : Setting terminal lock Ala tho chafing is sample toy « An administrator in local terminal 7 not by server program gan directly set up of release the terminal lick 1o the local terminal.
3. Configuration settings 3.8. Device settings [in the main many, press [8] io select ‘6. Device’, and ths following screen asking for a password appears: Data ult screen £3 £38] «in the most of cases, There is no need for modifying the device settings after installation. Therefore, be careful not to moodily the device settings without any obvious reasons. « Thai previously set password from factory is to call administrator's attention, which is fixed one and should not be changed.
3. Configuration settings 3.8.2. Card reader 3.8.2.1. Card reader type setting Default screen 3 [2] « Default siting: '0° «This is to set the card reader mounted in a terminal.
3. Configuration settings 3.8.3. Fingerprint sensor 3.8.3.1. 1:1 verification level Default screen 084265 + [ENTER] £3 [3] +» Default sating : ‘4’. = This is to set 1:1 marching security level for a terminal between the + Press [ENTER] to nova to fingerprint captured from fingerprint input window and the relevant he tex! sang fingerprint stored in a germinal. The higher 1:1 matching level means the higher security.
3. Configuration settings 3.8.3.3. Intelligent-Capture Detainee screen £2 [3] £5 [ENTER] £3 [ENTER] « Default siting : “1° «This adjusts the sensor settings automatically to enhance good fingerprint detection capability « After the sen is completely by reducing bad influences from humid fingers and/or residual fingerprints which are halftone a done, Te ome sensor window dus to squeal and/or contaminants on fingertip.
3. Configuration settings 3.8.5. System configuration Default screen 084265 [ENTER] O [5] 3.8.5.1. User ID length Data ult screen €3°084265+ [ENTER] CG [5] « Default setting : ‘4’ «+ This I length can be 2-8 digits and should be the same as + Crass [ENTER] to move ta that of I} registered in the server program. If the ID registered the next setting. in the saver program is input ‘6.
3. Configuration settings 3.8.8. Terminal initialization Detainee screen 084265 +[ENTER] £3 [6] «To initialize configuration settings, press [1]. Te initialize the record, press 2]. To factory default settings, press [3]. 3.8.6.1. Configuration settings initialization Default screen 084265 + [ENTER] initialize configuration settings, press [1].
4. How to use 4.1. Access control application [Default screen Option €2{1] Application £3 [0] for access control application 4.1.1. Authentication mode » Normal mode ; «Fi mode; «F2 mods ; authentication with authentication with (F1] authentication with [F2} [ENTER] «F mode ; authentication with [F3] «Fd mods ; authentication with (F4] « Fingerprint authentication Fingering authentication in the corresponding mods by pressing a relevant function kay; {Energy, [F1], [F2], [F3] and [F4].