User's Manual

ManualsBrandsLG Electronics USA ManualsElectronicsCellular CDMA/EVDO USB Modem

Part 15.21 statement

" Change or Modifications that are not expressly approved by the manufacturer could void

the user's authority to operate the equipment. “

Part 15.105 statement

This equipment has been tested and found to comply with the limits for a class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Summary of content (19 pages)

PAGE 1
Part 15.21 statement " Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. “ Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 2
Part 15 Class B Compliance This device and its accessories comply with part15 of FCC rules. Operation is subject to the following two conditions: (1) This device & its accessories may not cause harmful interference. (2) This device & its accessories must accept any interference received, including interference that may cause undesired operation. Body-worn Operation This USB modem has been tested for typical body-worn operations with the distance of 0.19inches (0.5cm) from the user’s body.
PAGE 3
LG Connection Manager Installing / Removing LG Connection Manager 1. Launch the LG Connection Manager installer to display the Setup screen. 2. In the Setup screen, click "Next" to proceed with the next step. 3. Specify an installation path or select the default installation folder, and click "Next". If you want to change the path, click "Browser" to select a desired folder. 4. When done, click "Next" to proceed.
PAGE 4
System Requirements 1. Hardware ① CPU: Pentium III or higher ② Memory: 64MB or more ③ Graphic Adaptor: 800X600 ④ Hard disk: 40MB or more in free disk space ⑤ PCI Express card port supported 2. Software ① Operating Systems: Windows XP, Windows Vista 32bit/64bit Introducing and Getting Started with LG Connection Manager LG Connection Manager is easy-to-use software that enables you to access the Internet without separate wiring.
PAGE 5
LG Connection Manager Features – HOME The start screen consists of: 1. 1. Top Area 4. Indicator Area 5. Home Area 2. Connection button Area 3. Main Category Button Area Top Area ①. Advanced menu expansion button: Top menu directory for advanced users ②. Minimize the program window – displays in the task bar ③. Exit the program– also displays in the right window tray 2.
PAGE 6
Network Status Icon Description WCDMA Currently connected to the WCDMA network. HSDPA Currently connected to the WCDMA-HSDPA network. HSUPA Currently connected to the WCDMA-HSUPA network. GPS Currently connected to the GPS network. GSM + WCDMA Currently connected to both GSM and WCDMA network. GSM+HSDPA Currently connected to both GSM and HSDPA network. GSM+HSUPA Currently connected to both GSM and HSUPA network.
PAGE 7
⑤ New message notice – The icon displays if a new message arrives or there exists an unread message. ⑥ Connection time – displays the time point it is connected to the Internet. ⑦ Indicates the amount of packets in use in the current Internet connection. 3. Home Area ① Displays the registration number. ② Displays the phone number of the connected modem. ③ Displays the current time and date. ④ Displays the value of network settings 4. Connection button area ① Connect / Disconnect button provided.
PAGE 8
[Settings] Button for configuring the settings of LG Connection Manager
PAGE 9
LG Connection Manager Features – Address Book 1. Address Book Support Information ① Click [Address Book] to move to the address book settings page. ② The maximum number of items to save is 1,000, if exceeded, a message of excessive SMS messages will be displayed. ③ Information to save includes user name, phone number and belonging group. ④ You can add or edit a group as well as delete an individual or entire groups. ⑤ You can use the provided search program to make search by the name or phone number.
PAGE 10
⑤ Click "OK" to save your settings. ⑥ Click "Cancel" to move to the previous page without saving the settings.
PAGE 11
LG Connection Manager Features – SMS 1. SMS Support Information ① Click [SMS] to move to the SMS settings page. ② The maximum count to save items is 1,000, which is based on a sum of items in each message box. ③ LG Connection Manager provides a total of 4 message boxes: Inbox Saves the incoming SMS messages. Outbox Saves the outgoing SMS messages. Drafts Temporarily saves items to send. USIM Card Box You can view messages in the USIM card.
PAGE 12
Note You can use the toolbox to navigate through the boxes. 2. Sending SMS 1 2 Addr.. 5 3 8 New Send Cancel ① Click [New SMS] to send a message. ② When the Sending SMS page appears, provide a message in the text box. ③ Provide a name or phone number in the applicable input box. ④ If you select a name that is already registered with the address book, the other information will be provided accordingly. ⑤ Click [Address Book] to open the address book where you select an item.
PAGE 13
⑧ Click "Send" to send your message. ⑨ The SMS transfer status will be informed with a popup. ⑩ Click "Cancel" to move to the previous page without saving the message. ⑪ Click "New" in the bottom to clear the text box. 3. Inbox ① This is the default page of the SMS settings. ② In the list of incoming messages, click "Reply" to reply to a selected message. ③ You can distinguish read from unread SMS by checking the shape of the left envelope icon.
PAGE 14
⑥ Select a desired item and click "Forward" to forward the item to other user(s). ⑦ For a user who is not added in the address book, click "Save Number" to add the user. ⑧ Select an item to delete and click "Delete" to delete it. 5. Drafts ① A SMS message that is yet to send due to a page transition will be saved in Drafts. ② Select an item and click "Delete" to delete it. ③ Click an item in the Drafts to move to the applicable text page. ④ In the text page, click "Edit" to move to the Send SMS page.
PAGE 15
LG Connection Manager Features – Settings  You can configure the environment settings of LG Connection Manager. Select a desired item to display the Settings page.  A brief description of the current settings will be displayed in the Settings page. 5. Usage 6. Default Settings Default Settings 4. USIM Card settings 3. Connection method 2. Reset Reset 1. Network search 1. Usage ① You can check the usage of packet data and reset the saved recording data.
PAGE 16
④ In the "Dial" item, the default is set to [*99***5＃] that you can change if necessary. ⑤ In [SMS Center Address], provide an IP address. ⑥ Click "OK" to save your settings and close the page. ⑦ Click "Cancel" to close the page without saving the changes. ⑧ Click "Reset" to restore the default. 3. USIM Card Settings ① In the Settings page, click a USIM Card setting item to display the applicable page. ② You can choose to lock the USIM card. ③ Select an item in [PIN Mode].
PAGE 17
2 Unassigned 3 Unassigned 4 ~ 10 Unassigned ④ Use the toolbox to set the [Connection Method=PDP]. Specify for both [PPP Type] and [IP Type]. (Data Call Type included) ⑤ Enter a value for [APN registration = station]. ⑥ Click "OK" to save your settings. ⑦ Click [Reset] to restore the default. ⑧ Click "Cancel" to close the slide without saving the changes. 5. Reset LG Modem ① You can make settings directly in the Settings page without an additional sliding page.
PAGE 18
PAGE 19
LG Connection Manager Features – Internet Access 1. In the start screen of LG Connection Manager, click "Connect" to connect to the Internet. When the connection is completed successfully, it is ready to use the Internet service. 2. The following table informs you of the modem status and actions for a possible network problem. Message Needs to connect the modem. Description and Action Currently no modem is connected to your PC. Check if a modem is connected to your PC properly.