LGE Internal Use Only Smart Appliance Accessory manual Thank You for purchasing this Smart Appliance Accessory!!! This Accessory is used exclusively for LG Electronics Smart Appliances. This instruction manual will guide you through the setup of the communication modems. Please refer to the product owner’s manual for a description of each product functions.
Accessory Manual 1. Contents LGE Internal Use Only USB Memory stick • The memory stick is for updating the software when there is a Wireless Network failure. To download new software, access the LG Smart Appliance homepage (http://us.smartthinq.com), download necessary SW onto the USB, and update the software by plugging it into the wireless modem port. Wireless Modem • The wireless modem enables Wireless Network connection and Remote control, monitoring and SW download possible.
Accessory Manual LGE Internal Use Only 2. Installation (Washer) 1) Check the “Smart Connect” cover. 2) Open “Smart Connect” cover to determine the location of the modem. If you’re in front of the panel, plug the Zigbee modem in the left side and plug the Wi-Fi modem in the right side. The Zigbee modem and Wireless modem back be used separately.
Accessory Manual LGE Internal Use Only 2. Installation (Washer) 3) The picture below shows both modems plugged in. Zigbee Modem Wi-Fi Modem (or USB Memory stick) 4) After plugging in the modem, close the cover.
Accessory Manual LGE Internal Use Only 2. Installation (Washer) 5) How to check settings on the wireless modem a) Press the Settings button on the front page of the LCD Screen. b) Press the Wi-Fi button in the Setting menu.
Accessory Manual LGE Internal Use Only 2. Installation (Washer) 6) How to verify the Zigbee modem Once the Zigbee Modem is plugged in and connected to a smart meter or hub, the Zigbee icon will be displayed in the upper-right corner within 30 seconds Default Cycle < BRIGHT WHITESTM Cotton / Normal Heavy Duty THINQ Recent Cycle Sanitary Guide Bulky / Bedding > Perm.
Accessory Manual LGE Internal Use Only 3. Installation (Refrigerator) * The wireless modem is already plugged in. There is no need for additional installation. 1) Open the knob shutter on the holder cover located at the upper area behind right refrigerator door. 2) Plug the Zigbee Modem into the holder cover properly as shown in the picture below. 3) After plugging in the Zigbee Modem, close the knob shutter.
Accessory Manual LGE Internal Use Only 3. Installation (Refrigerator) 4) How to check settings for the wireless modem a) Press the Settings button on the LCD homescreen b) Press Wireless Network.
Accessory Manual LGE Internal Use Only 3.
Accessory Manual LGE Internal Use Only 4. Notes - Contents from the Accessory Manual (hardware, software, product content, and etc.) cannot be revised without the individual users’ consent due to performance improvement and other reasons - Due to individual users’ internet service contract, regulation, and environment, there may be restrictions/limitations on basic performance or features.
LGE Internal Use Only This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.