User's Manual

ManualsBrandsLG Electronics USA ManualsElectronicsWLAN Module

1. User Manual

This user manual gives a brief overview of how to use LCW-002 Wi-Fi Module.

2. Product Overview

LCW-002 Wi-Fi Modem provides the connectivity between users and product. This allows

a user to manage and control product and monitor product status from the outside of the

house using Smartphone or notebook.

LCW-002 Wi-Fi Modem is installed in home appliances.

3. Specifications

- WLAN Standard : 802.11 b/g/n

- Host Interface : UART Interface

- Operating Tempeature : 0 ~ 40℃

- Operating Voltage : 4.5V ~ 5.5V

4. Function Block

▣ Block Diagram

1) Wi-Fi

- SoC Module including Microcontroller and Wi-Fi chipset

2) Level shift circuits

- Signal level shift circuits to communicate between appliance and AW-CU282 Wi-Fi module by

UART interface.

3) DC-DC Converter

- DC 5V converted to DC 3.3V

4) Main Connector

- Connect Wi-Fi modem with appliance

Summary of content (5 pages)

PAGE 1
. User Manual This user manual gives a brief overview of how to use LCW-002 Wi-Fi Module. 2. Product Overview LCW-002 Wi-Fi Modem provides the connectivity between users and product. This allows a user to manage and control product and monitor product status from the outside of the house using Smartphone or notebook. LCW-002 Wi-Fi Modem is installed in home appliances. 3. Specifications - WLAN Standard : 802.
PAGE 2
5. Product Registration and Wi-Fi Setup 1) Download and install LG App offered by the App store. 2) Run the LG App and proceed to sign up. 3) Enter the required information. 4) Proceed to register your product 5) Set the AP information. 6) LG App will automatically set up Wi-Fi settings of the LCW-002 Modem. 7) LCW-002 Modem is connected to AP. 6. Warning Statement FCC Part 15.19 Statements: This device complies with Part 15 of the FCC Rules.
PAGE 3
The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all persons at all times. This device must not be co-located or operating in conjunction with any other antenna or transmitter. End Product Labeling The module is labeled with its own FCC ID and IC Certification Number.
PAGE 4
Les changements ou modifications de cet appareil non expressément approuvé par le fabricant peuvent annuler votre droit à utiliser cet équipement. É tiquetage du produit final (IC) Le module BT111 est étiqueté avec sa propre identification FCC et son propre numéro de certification IC.
PAGE 5
Industrie Canada Les modules ont été certifiés pour entrer dans la fabrication de produits exclusivement réalisés par des intégrateurs dans les conditions suivantes : - Le module transmetteur ne doit pas être installé ou utilisé en concomitance avec une autre antenne ou un autre transmetteur. Tant que ces deux conditions sont réunies, il n’est pas nécessaire de procéder à des tests supplémentaires sur le transmetteur.