Order Number : GETEC-C1-17-087 FCC Part 15 subpart C Test Report Number : GETEC-E3-17-002 Page 1 / 1 APPENDIX H : USER’S MANUAL EUT Type: DUST RF MODULE FCC ID.
S610 RF Module(Tx) User Information (Model Name: EAT63294801) [ENGLISH] Contents 1. Overview and specification (1) Overview (2) Specification 2. Precautions 3. Customer Support 1. Overview and specification (1) 개 요 This RF module is installed on the dust sensor board of the vacuum cleaner. It is a transmitter that controls the vacuum cleaner by working with the receiver which is installed on the main board of the vacuum cleaner using the 2.4GHz wireless band. (2) 제 원 구 분 내 용 Model No.
2. Precautions (1) After replacement of the battery, use the handle following pairing in accordance with user manual. (2) If the unit does not operate after replacement of battery, take the battery out and reattempt pairing in accordance with the user manual. (3) If the remote control is not being used for prolonged period of time, it is recommendable to remove the battery from the unit. (4) Do not dismantle or exert heat to the battery.
Regulatory Notices 1. FCC FCC Statements: This device complies with Part 15 of the FCC Rules. Operation is subject to the following Two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. End Product Labeling The module is labeled with its own FCC ID Number.