User Manual PRODUCT NAME : WiFi Module MODEL NAME LGSWF41 : The information contained herein is the exclusive property of LG Innotek and shall not be distributed, reproduced or disclosed in whole or no in part without prior written permission of LG Innotek.
User Manual REG. DATE : 2013.11.06 REV.NO : 1.0 MODEL NAME : LGSWF41 REV. DATE : 2013.11.06 PAGE : 1 / 10 Index No Description Page 1 Features 2 2 Module Photo 2 3 Install Guide 3 4 Block Diagram 4 5 Absolute Maximum Ratings 4 6 Operating Conditions 5 7 Standard Test Conditions 5 8 Pin Description 6 9 Outline Drawing 7 10 Packing Information 8 Copyrightⓒ. 2013. All Rights Reserved.
User Manual REG. DATE : 2013.11.06 REV.NO : 1.0 MODEL NAME : LGSWF41 PAGE : 2 / 10 REV. DATE : 2013.11.06 1. Features is the small size and low power module for IEEE 802.11 ac/a/b/g/n wireless LAN is based on Broadcom BCM43526 solution. IEEE 802.11 ac/a/b/g/n Dual Band WLAN infrastructure Size : 54.0mm x 34.0mm x 4.95mm 2.4GHz and 5GHz, External PA and LNA Two stream spatial multiplexing up to 300Mbps(802.11n)/ 867Mbps(802.
User Manual REG. DATE : 2013.11.06 REV.NO : 1.0 MODEL NAME : LGSWF41 PAGE : 3 / 10 REV. DATE : 2013.11.06 3. Install Guide Cable is connected to the TV then inserted into the module. Not an escape module, as shown below is mounted on the TV. TV Rear Panel installed position Cable Copyrightⓒ. 2013. All Rights Reserved.
User Manual REG. DATE : 2013.11.06 REV.NO : 1.0 MODEL NAME : LGSWF41 PAGE : 4 / 10 REV. DATE : 2013.11.06 4. Block Diagram 5. Absolute Maximum Ratings Caution : The specifications in Table 1 define levels at which permanent damage to the device can occur. Function operation is not guaranteed under these conditions. Operating at absolute maximum conditions for extend periods can adversely affect the long-term reliability of the device.
User Manual REG. DATE : 2013.11.06 REV.NO : 1.0 MODEL NAME : LGSWF41 PAGE : 5 / 10 REV. DATE : 2013.11.06 6. Operating Conditions Parameter Min Typ Max Unit Operating Temperature 0 - +55 ℃ Operating Humidity (40℃) - - 85 % Supply Voltage 3.135 3.3 3.597 Vdc 7. Standard Test Conditions The Test for electrical specification shall be performed under the following condition Otherwise this following conditions, not guaranteed this performance. 7-1.
User Manual REG. DATE : 2013.11.06 REV.NO : 1.0 MODEL NAME : LGSWF41 PAGE : 6 / 10 REV. DATE : 2013.11.06 8. Pin Description Pin No. Pin Name I/O Pin Description 1 VDD I VDD 3.3V 2 USB_DN I/O USB Communication signal USB_DN 3 USB_DP I/O USB Communication signal USB_DP 4 GND - GND 5 WOWL O Wake on Wireless Lan 6 NC - Not Connected < TOP View > A Copyrightⓒ. 2013. All Rights Reserved.
User Manual REG. DATE : 2013.11.06 REV.NO : 1.0 MODEL NAME : LGSWF41 REV. DATE : 2013.11.06 9. Outline Drawing Copyrightⓒ. 2013. All Rights Reserved.
User Manual REG. DATE : 2013.11.06 REV.NO : 1.0 MODEL NAME : LGSWF41 REV. DATE : 2013.11.06 10. Packing Information Copyrightⓒ. 2013. All Rights Reserved.
User Manual REG. DATE : 2013.11.06 REV.NO : 1.0 MODEL NAME : LGSWF41 REV. DATE : 2013.11.06 Copyrightⓒ. 2013. All Rights Reserved.
User Manual REG. DATE : 2013.11.06 REV.NO : 1.0 MODEL NAME : LGSWF41 REV. DATE : 2013.11.06 Copyrightⓒ. 2013. All Rights Reserved.
Regulatory Notices 1. FCC FCC Statements: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. End Product Labeling The module is labeled with its own FCC ID and IC Certification Number.
product (including the transmitter) and obtaining a separate FCC and Industry Canada authorization. 2. IC Étiquetage du produit final (IC) Le module BT111 est étiqueté avec sa propre identification FCC et son propre numéro de certification IC.
REMARQUE IMPORTANTE : En cas d’inobservance de ces conditions (en ce qui concerne certaines configurations ou l’emplacement du dispositif à proximité d’un autre émetteur), les autorisations de FCC et d’Industrie Canada ne seront plus considérées valables et l’identification de FCC et le numéro de certification d’IC ne pourront pas être utilisés sur le produit final.