CDMA Fixed Wireless Telephone User Guide Model: LSI-110
LGE CDMA Fixed Wireless Telephone LSI-110/1100 REVISED HISTORY DATE 2002/05/13 ISSUE ISSUE1 CONTENTS OF CHANGES Initial Release 2 REMARK
LGE CDMA Fixed Wireless Telephone LSI-110/1100 Blank Page 3
FCC RF EXPOSURE INFORMATION WARNING! Read this information before using your phone In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 CONTENTS Highlights ............................................................................................................................... 6 1. Important Information ...................................................................................................... 7 1.1 Safety Information ..................................................................................................... 7 1.2 Optimal Phone Performance..........................
LGE CDMA Fixed Wireless Telephone LSI-110/1100 4.4.3 Clear Memory................................................................................................ 23 4.4.4 Emergency Call............................................................................................. 23 4.4.5 Restriction Call Service ................................................................................. 23 5. Functions while in a call ....................................................................................
LGE CDMA Fixed Wireless Telephone LSI-110/1100 Highlights Congratulations on your purchase of the LSI-110 Fixed Wireless Telephone. This telephone has been designed to operate on the latest digital mobile communications technology. This technology has greatly enhanced voice clarity and can provide various advanced features.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 1. Important Information 1.1 Safety Information Warning To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Do not use this product near swimming pools or other bodies of water. IMPORTANT Before installing or operating this product read this information. 1.2 Optimal Phone Performance Do not operate your product when holding the antenna, or when someone is within four inches (ten centimeters) of the antenna.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 1.3 Care and Service Unplug the telephone from the wall outlet and remove antenna (or disconnect antenna cable) before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. If the unit fails for any reason, do not attempt to disassemble; contact the telephone service provider for assistance. If any of the following conditions exist; unplug the unit at the wall plug, remove battery, and call the service provider.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 2. Introduction 2.1 Front View of the Telephone ① ② Navigation Left[◀ ] ⑥ Navigation Down[ ] ⑦ ⑧ ③ Soft Key 1[MENU] ④ ⑤ SEND[SEND] Navigation Up[ ] Navigation Right[▶ ] Soft Key 2[BOOK] ⑨ END[END] ⑩ “#” Key : Key Pad Lock ⑪ CLEAR[CLEAR] REDIAL[REDIAL] ① Navigation Left Key : Function for decreasing volume down. ② Navigation DOWN Key : Function for scrolling down menu in menu state.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 2.2 LCD Display The LCD shows icons on the top of the LCD screen. Different indicator appears based on the phone's operating mode. 13 13 May, May,Mon Mon 44: :11 PM 11 PM ME MENU NU BOOK BOOK 1) RSSI indicator : Indicates the signal strength in the service area. 2) 3) No service : The phone is not receiving system signal. In use : Displayed when call is in progress or the phone is in off-hook and dial tone heard.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 2.3 Installation You should follow each step carefully as shown below in order to guarantee proper operation of CDMA Fixed Wireless Telephone. STEP I. Check Components Fixed Wireless Terminal is supplied with the following standard unit and accessories; 1. 2. 3. 4. 5. LSI-110/1100 Main Unit with Antenna Battery User Guide AC/DC Adapter Charger -1EA-1EA-1EA-1EA-1EA- Please make sure that these components are present before you begin the unit installation.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 STEP IV. Check the LCD Display After you follow the installation instruction step I to step III, please check the LCD for normal operation. If you may not see status of service, please repeat the 2nd instruction of step III. And conform Fixed Wireless Telephone to get the proper signal strength from service operator system. ※ The adapter type may be different by country adaptation.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 2.4 Installation Connect the AC power supply line in the charger Connect outlet. Press and hold the button to power on. Pick down handset on charger. adapter to the the After charging the terminal, make a call. Lock Switch : Lift up the lever to fix the handset on charger. Lift up the lever to make a data call with PC using USB port on charger. LOCK UNLOCK The adapter type may be different by country adaptation. Be careful of power voltage.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 2.4 Battery Replacement Step ① Battery ② Battery Cable ③ Battery Cover ④ Charging Slot Open the battery cover of the unit. Insert battery in the unit(give care to polarity). Press button to make phone be powered on for 1 sec. 14 Connect battery cable. Replace the battery cover.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 3. Basic Operation 3.1 Making a Call 1. Pick up the handset and press Send Key button 2. Listen for dial tone 3. Enter the phone number with area code if needed. S AVE S AVE 4. 1234567 1234567 F IND F IND Wait for the Auto Time-out. Calling. . . Calling. . . 1234567 1234567 5. The call is connected and you can start conversation. 6. To disconnect the call, Press End button. 3.2 Redialing Last Outgoing Number 1.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 3.3 Receiving a Call 1. When bell rings, Press Any Key or pick up the handset from the charger. Call From Call From 0123456789 0123456789 Press Send key at the Lock state. 2. Start conversation. 3. To disconnect the call, press End key or pick down the handset on the charger. Time: Time: ME NU ME NU 0 : 23 0 : 23 012345789 012345789 MUTE MUTE 3.4 Signal Strength The quality of calls depends on the signal strength in your area.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 4. List of Menu State Main Menu 1. Volume / Ring 2. Additional 3. Dial features 4. Security Sub-Menu Setting Value 1. Ring Volume 2. Key Volume 3. Ear Volume 4. Ring Type 1. Wake-up time 2 .Minute alert 3.Rx call mode 4 steps 4 steps +silent 4 steps 10 types Off/Once/Always On/Off 4.Backlight Always off / 10 seconds / 30 seconds 5.Own Number 1. Hot Line 2. Hot Line Time 3. Auto time-out Display own number Off/On 2-9 Sec. 2-9 Sec. 4.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 4.1 Volume / Ring This menu allows you to adjust the various different volumes. 4.1.1 Ring Volume The received tone when you receive a call can be adjusted. From the MENU 1. Press [MENU] + 1(Volume/Ring)+ 1(Ring Volume) in onhook state. 2. Press Navigation Left / Right Key or [NEXT] to adjust ring volume. 3.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 4.1.3 Ring Select You can select the various ring types. 1. Press [MENU] + 1(Volume/Ring) 4(Ring Type) in on-hook state. + 2. Select a desired ring type with Navigation Up / Down Key or [NEXT]. There are 10 different ring types. Those are Standard,Option 1,Option 2, Option 3, Option 4, Habanera, Deutsch song, La Primavera, Oh! susanna, Beethoven RINGE R TY PE RINGE R TY PE OK OK S TANDARD S TANDARD RING 1 RING 1 RING 2 RING 2 NE XT NE XT 4.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 1. Press [MENU] + 2(ADDITIONAL) + 3(RX Call Mode) in on – hook State. 2. Select Voice, Fax for next, Always Fax, Modem for next by Navigation Left / Right Key or [NEXT] . 3. Press [OK] to save and exit. RX C ALL MODE RX C ALL MODE OK OK Voic e Voic e F ax F or Next F ax F or Next Always F ax Always F ax NE XT NE XT 4.2.4 Backlight 1. Press [MENU] + 2(ADDITIONAL) + 4(Backlight) in on – hook State. BAC KLIGHT BAC KLIGHT 1.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 2. Select hot line connection time(2~9 sec.) by [NEXT] or Navigation Up / Down key. 3. Press [OK] to select. Hot Line Time Hot Line Time OK OK 4.3.3 Auto Time-out Setting the length of time the phone waits before automatically dialing a number. You can select this time between 2 and 9 second. 1. Press [MENU] + 3(DIAL FEATURES) + 3(Auto Timeout) In on – hook State.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 location, and hold for a few seconds. 4.3.5 Key-tone Length Setting key beep playback length. Possible settings are Normal and Long. 3. Press [MENU] + 3(DIAL FEATURES) + 5(KeyTone Length) in on – hook State. DIAL FEAUTRES DIAL FEAUTRES 4:Speed Dialing 4:Speed Dialing 5:KeyTone Length 5:KeyTone Length OK OK NE XT NE XT 4. Select Normal or Long by [NEXT] or Navigation Up / Down key and press [OK] to select.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 2. Press 2(Clear Calls) 3. Press [YES] to erase all call history. 4.4.3 Clear Memory When you want to delete phonebook memory, you can erase all phonebook memory. 1. o the above step1 and 2 of 4.4.1. OK OK 2. Press 3(Clear Memory). 3. C LE AR WHOLE BOOK C LE AR WHOLE BOOK No No Y es Y es NE XT NE XT Press [YES] to erase all phone memory. 4.4.4 Emergency Call Even if your phone is locked you can make calls to 3 emergency numbers EMERGENCY 1 123 1.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 1. set “Restriction” in Restrict set menu (Menu 4.5.1) 2. set “700” in deny edit. (Menu 4.5.3) 3. set “700-1234” in permit edit.(Menu 4.5.2) Result : user can use the phone number started with “700-1234”. 4.4.5.1 Restrict set No restriction This is a general function which has no any restrictions Restriction This is a function that you can set permitted phone number and denied phone number.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 2. Press 5(Restrict Call) and 2(Permit Memory). 3.Press [EDIT] to edit permit phone number. Permit Permit 1 1 4.Enter the permit phone number. 12345 12345 E DIT E DIT 5.Press [OK] to save and exit. NE XT NE XT 4.4.5.3 Deny memory You couldn’t call any phone numbers saved in deny edit. You can save 10 deny phone numbers. 1. Do the above step 1~2 of 4.4.1 2. Press 5(Restrict Call) and 3(Deny Memory).
LGE CDMA Fixed Wireless Telephone LSI-110/1100 2. You could see “MUTE” message blinking on the right side of the LCD 3. To release Mute, Press [TALK] button. Time : Time : 0:23 0:23 1234567 1234567 ME NU ME NU 5.2 Ear Volume You may adjust ear volume while you are in a call. TALK TALK EAR VOLUME EAR VOLUME OK OKOK OK NE XT NENE XTXT NE XT The Navigation Left / Right Key in the middle of the phone can be used to adjust ear volume. 6. Searching, Editing & Dialing 6.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 3. Enter the name that you want to look for and press [FIND]. Lookup Name? Lookup Name? _ _ At least two letters are recommended for quick search. ABC D ABC D F IND F IND Press Navigation Up / Down Key to scroll through the list of matches. 01 : 01 09 : 09 43 : 43 J AME S : J AME S J AME S : J AME S J AME S : J AME S VIE W VIE W DE L DE L 4. Press [VIEW] to see information in that location. Pick up handset and Press Send button to make a call.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 3) Press Navigation Down Key to go to the next step. Enter a new memory address to store a new information or choose the new memory address Press Navigation Down Key to go to the next step. 1) JAMES JAMES ADDR :<01> ADDR :<01> TYPE : TYPE : 1234567 1234567 S AVE QUIT QUIT S AVE Select secret or in secret icon secret by Navigation Left / Right Key 1) Press Navigation Down Key to go to the next step.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 information or press [DEL] to delete displayed information. E RAS E ? E RAS E ? # 01 # 01 Edit process. Quitting process Do the above step of 6.2.2. No No Y es Y es OK OK 6.4 Fast Searching NE XT NE XT RECALL RECALL 1:FROM LAST CALL 1:FROM LAST CALL 2:FROM MEMORIES 2:FROM MEMORIES 1. Press [BOOK] button OK OK BOOK BOOK 2.Press [BOOK] button again.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 1. Press MESSAGE button and 1(MSG RECEIVED) 2. Press 1(Text MSG) to see a received text message list. Locate to the desired message in the list. Mark “( “means already a checked message. MSGRECEIVDE MSGRECEIVDE 1: Text MSG 1: Text MSG 1/5 1/5 2: VOICE MSG 8 2: VOICE MSG 8 3: MSG NOTIF 3: MSG NOTIF OK OK NE XT NE XT 3. Press [VIEW] to see the content of desired message. You can see the message with received time and caller’s phone number.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 Press [DEL] to delete the voice message. E RAS E All ? E RAS E All ? 7.1.3 Erasing all Received Message 1. Press MESSAGE button and 1(MSG RECEIVED). OK OK 2. Press 3(Clear All) 3. Press [OK] to delete. 7.2 MSG Notification tone select NE XT NE XT MS G NOTIF MS G NOTIF 1. Press Up button and 3(MSG NOTIF). 2. Select off, once, Every 2 Min by pressing [NEXT] or Navigation Up / Down Key. . 3.
C alled Number C alled Number LGE CDMA Fixed Wireless Telephone LSI-110/1100 OK OK 5. Input a message and press [OK] to send Press [ABCD] to change upper or lower case character BOOK BOOK abcd_ abcd_ OK OK ABC D ABC D 6. Select Yes/No to store the message. Press [OK] to send Store Message ? Store Message ? No No Yes Yes OK OK NE XT NE XT 7.3.2 Sending the sent Message or message after editing the Sent Message 1.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 7.3.3 Erasing a Sent Message 1. Press Navigation Up button and 2(MSG SENDING) MSG SENDING MSG SENDING 1:New Message 1:New Message 2:Sent Message 2:Sent Message 3:Clear All 3:Clear All OK OK NE XT NE XT 2. Press 3(Clear All) to clear text message list. E RAS E ALL ? E RAS E ALL ? OK OK 3. Press [OK] to erase a message. No No Y es Y es NE XT NE XT 8.Beside Functions 8.1 Redial Pick up the handset.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 8.3 Flash The same as that of a single line phone 8.4 Safe mode Even if you misplaced the handset for long, The phone returns to the normal state. After the ROH tone, The phone returns to the IDLE state as the picture and the phone is able to receive a call. 13 May, Mon 13 May, Mon 4 : 11 PM 4 : 11 PM ME NU ME NU BOOK BOOK 9. Storing Phone Number 9.1 Storing/Editing Phone Numbers 9.1.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 or Navigation Right Key. 4. Press [SAVE]. 5. Enter the name in text mode and press Navigation Down Key to go to the next step. Press [ABCD] to change upper or lower case characters. (Max. 17 characters) To store without name, just press Navigation Down Key Refer to “To enter a character”. 6. Enter the desired memory location and Navigation Down Key to go to the next step. and press The phone number is stored in the displayed memory location.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 You can see a confirming message. ABC ABC is stored is stored in 01 in 01 Also you can see a condition of used memory. - MEMORY - MEMORY USED : 01 USED : 01 empty : 98 empty : 98 To enter a character. You can enter English character in editing mode. You can enter English character as default, and press Message to select specific character. To enter English character.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 9.1.2 Erasing Stored Phone Numbers When a phone number is stored in a memory location, you can erase the stored phone number. 1. Press [BOOK] + 1(FROM MEMORIES) + 3(By Number) and enter a number of the desired memory Lookup Number? Lookup Number? location to erase. F IND F IND If there is no stored phone number in the memory location, “Empty Location” is displayed.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 2. Press [FIND] button to find the desired phone number. Locate in the desired name or address to find. If not any entered name, phone number is displayed. 01 : 01 12 : 12 J AME S : J AME S S ilvia : S ilvia VIE W VIE W DE L DE L 3. Press [VIEW] to see the stored number. 3. To make a call with the phone number in the state of step 2 or step 3, pick up the handset from the charger or Press Send button and wait for Auto Time-out.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 Input Voltage Input Frequency Output Voltage AC 100 ~ 240V / 0.2A 50 / 60Hz DC12V, 0.5A Battery Item Capacity Talk duration time Standby duration time Charging duration time Description 3.
LGE CDMA Fixed Wireless Telephone LSI-110/1100 Licensed by QUALCOMM Incorporated under one or more of the following Patents: U.S, Patent No. 4,901,307 U.S, Patent No. 5,056,109 U.S, Patent No. 5,099,204 U.S, Patent No. 5,101,501 U.S, Patent No. 5,103,459 U.S, Patent No.
