CDMA Fixed Wireless Telephone User Guide Model: LSP-340
LGE CDMA Fixed Wireless Telephone LSP-340 REVISED HISTORY DATE 2001/10/25 ISSUE ISSUE1 CONTENTS OF CHANGES Initial Release 3 REMARK
LGE CDMA Fixed Wireless Telephone LSP-340 Blank Page 4
LGE CDMA Fixed Wireless Telephone LSP-340 CONTENTS Highlights ............................................................................................................................... 6 1. Important Information...................................................................................................... 8 1.1 Safety Information .................................................................................................. 8 1.2 Optimal Phone Performance ...................................
LGE CDMA Fixed Wireless Telephone LSP-340 7. SMS (Short Message Service) ........................................................................................ 24 7.1 Checking & Deleting Received Message ............................................................. 24 7.1.1 Text Message............................................................................................. 24 7.1.2 Voice Message........................................................................................... 25 7.1.
LGE CDMA Fixed Wireless Telephone LSP-340 Dipole Antenna DB9 Data Port for service and repair Backlingt Speaker phone 7
FCC RF EXPOSURE INFORMATION WARNING! Read this information before using your phone In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
LGE CDMA Fixed Wireless Telephone LSP-340 1. Important Information 1.1 Safety Information Warning To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Do not use this product near swimming pools or other bodies of water. IMPORTANT Before installing or operating this product read this information. 1.2 Optimal Phone Performance Do not operate your product when holding the antenna, or when someone is within four inches (ten centimeters) of the antenna.
LGE CDMA Fixed Wireless Telephone LSP-340 We recommend you to charge the backup battery before initial use. Backup battery may be discharged during delivery. 1.3 Care and Service Unplug the telephone from the wall outlet and remove antenna (or disconnect antenna cable) before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. If the unit fails for any reason, do not attempt to disassemble; contact the telephone service provider for assistance.
LGE CDMA Fixed Wireless Telephone LSP-340 2. Introduction 2.
LGE CDMA Fixed Wireless Telephone LSP-340 2.2 LCD Display The LCD shows icons on the top of the LCD screen. Different indicator appears based on the phone's operating mode. 1) RSSI indicator : Indicates the signal strength in the service area. 2) 3) No service : The phone is not receiving system signal. In use : Displayed when call is in progress or the phone is in off-hook and dial tone heard. : No service : In use 4) Text message : Displayed when a text message is received.
LGE CDMA Fixed Wireless Telephone LSP-340 12
LGE CDMA Fixed Wireless Telephone LSP-340 2.3 Installation You should follow each step carefully as shown below in order to guarantee proper operation of CDMA Fixed Wireless Telephone. STEP I. Check Components Fixed Wireless Terminal is supplied with the following standard unit and accessories; 1. LSP-340 Main Unit with Handset -1EA2. Dipole Antenna -1EA3. Backup Battery -1EA4. User Guide . -1EA5. AC/DC Power Adapter -1EA6.
LGE CDMA Fixed Wireless Telephone LSP-340 Handset Connector Antenna TNC Connector STEP IV. AC Power Supply Connector Check the LCD Display After you follow the installation instruction step I to step III, please check the LCD for normal operation. If you may not see status of service, please repeat the 5th instruction of step III. And conform Fixed Wireless Telephone to get the proper signal strength from service operator system.
LGE CDMA Fixed Wireless Telephone LSP-340 2.4 Installation Steps Please follow the below procedure to install the unit properly. 1 1 Connect Basehandset to the handset connector. 2 1 Connect the antenna to the TNC connector (Turn right). 3 4 Bend the antenna up right. 1 Open the battery cover at the bottom of the unit. 5 1 6 Insert back-up 1 battery in the bottom of the unit. (give care to polarity) 15 Connect the AC power supply.
LGE CDMA Fixed Wireless Telephone LSP-340 3. Basic Operation 3.1 Making a Call 1. Pick up the handset or press button. 2. Listen for dial tone 3. Enter the phone number with area code if needed. 1234567 4. Wait for the Auto Time-out. Calling... 1234567 5. The call is connected and you can start conversation. 6. To disconnect the call, replace the handset or press button. 3.2 Redialing Last Outgoing Number 1. Pick up the handset or press button. 2. Listen for dial tone.
LGE CDMA Fixed Wireless Telephone LSP-340 3.3 Receiving a Call 1. When bell rings, pick up the handset. Incoming Call! 2. Start conversation. 3. To disconnect the call, replace the handset. Time: 0:23 [MUTE] 3.4 Signal Strength The quality of calls depends on the signal strength in your area. The stronger the signal, the better the call quality. The signal strength icon indicates the current strength as a number of bars.
LGE CDMA Fixed Wireless Telephone LSP-340 4. List of Menu State Main Menu Sub-Menu Setting Value 1. Select Volume 1. Ring Volume 2. Key Volume 3. Ear Volume 4 steps 4 steps +silent 4 steps 4. Ring Select 2. Additional 1. Key tone length 10 types normal/Long Enable/Disable 2 .Minute alert 3.Rx call mode Voice / Fax for next / Always Fax / Modem for next / Always modem 4.SIO baud rate 19200/38400/57600/115200 /230400 Default 4.
LGE CDMA Fixed Wireless Telephone LSP-340 3. Press [OK] 4.1.3 Ear Volume The voice of the other party can be adjusted in on-hook state. 1. 2. Press [MENU] + 1(Volume/Ring) + 3(Ear Volume) in on-hook state. Press Volume button or [NEXT] to adjust ear piece volume EAR VOLUME OK NEXT 3. Press [OK] Press Volume button to adjust volume during conversation 4.1.4 Ring Select You can select the various ring types 1. Press [MENU] + 1(Volume/Ring) + 4(Ring Type) RINGER TYPE in on-hook state. 2.
LGE CDMA Fixed Wireless Telephone LSP-340 4.2.2 Minute Alert Alerts you every minute during a call. 1. Press [MENU] + 2(ADDITIONAL) + 3(Minute Alert) MINUTE ALERT In on – hook State 2. Select On or Off by [NEXT] or Volume button. OK On NEXT 3. Press [OK] to save and exit 4.2.3 Set Rx call mode . 1. Press [MENU] + 2(ADDITIONAL) + 4(RX Call Mode) in on – hook RX CALL MODE State. 2. Select Voice, Fax for next, Always Fax, Modem for next by Volume or [NEXT] button. OK voice NEXT 3.
LGE CDMA Fixed Wireless Telephone LSP-340 5. Functions while in a call 5.1 Mute This function prevents your voice from being transmitted but you can call still hear other side. Time: 1. Press [MUTE] button while in a call. 0:23 1234567 MUTE] 2. You could see “MUTE” message blinking on the right side of the LCD 3. To release Mute, Press [UNMUTE] button. Time: MUTE 0:23 1234567 [UNMUTE] 5.2 Ear Volume You may adjust ear volume while you are in a call.
LGE CDMA Fixed Wireless Telephone LSP-340 Press [NEXT] or UP and DOWN button to scroll through the list of matches. 01:ADG 02:ACG VIEW ERASE 4. Press [VIEW] to see information in that location. Pick up handset to make a call. You can edit the phone number by pressing [EDIT] button. 6.2 01:ADG EDIT 028503619 ERASE Retrieving Phone Number by Address 1. Press [RECALL] and 2(FROM MEMORIES) 2. Press 2 button to retrieve a phone number by address. 3. Enter a memory address to retrieve phone number.
LGE CDMA Fixed Wireless Telephone LSP-340 Erasing process You might press [ERASE] at the above step 3. Press [OK] to complete erasing process. ERASE ? OK #02 NO NEXT 6.3 Retrieving Phone Number by NUMBER 1. Press [RECALL] and 2(FROM MEMEORIES). 2. Press 3 button to retrieve a phone number by number. Lookup Number? ?? 3. Enter the phone number that you want to find and press FIND [FIND] button. If there is no stored phone number in the memory location, “No number matches” is displayed. 4.
LGE CDMA Fixed Wireless Telephone LSP-340 7.SMS (Short Message Service) Messaging, Paging, and Voice mail features are available when your phone is turned on. Using Message button allows you to access messages for viewing on the LCD screen or to send a message. Check with your WLL service provider regarding the availability of this feature. The information in a message depends on the mode the WLL is operating in and the service’s capabilities. 7.1 Checking & Deleting Received Message 7.1.
LGE CDMA Fixed Wireless Telephone LSP-340 7.1.2 Voice Message Voice mail notifications indicate the number of new voice mail message in your mail box. Only the most recent voice mail notification will be stored in the WLL phone; previous messages will be overwritten. When a voice mail messages left for you, the WLL phone will alert and display “ * Voice Mail * “. You must call your voice mail service to retrieve these messages. 5/21 2:32 PM * VOICE MAIL * 1.
LGE CDMA Fixed Wireless Telephone LSP-340 7.3 Message Sending 7.3.1 Sending a New Message 1. Press MESSAGE button and 2(MSG SENDING) SMS MENU 1:MSG Received 2:MSG Sending 2. Press 1(New Message) to send a new message MSG SENDING 1:New Message 2:Sent Message 3. Enter the called number and press [OK] You can find the called number in the memory by Called Number [FIND] button OK 1234 [FIND] 4. Enter the call back number and press [OK] Call back Number 5678 OK 5.
LGE CDMA Fixed Wireless Telephone LSP-340 7.3.2 Sending the sent Message or message after editing the Sent Message 1. Press MESSAGE button and 2(MSG SENDING) . 2.Press 2(Sent Message) to see a received text message list. Locate to the desired message in the list. MSG Sending 1:New MSG 2:Sent MSG . 3. Press [EDIT] to edit the content of the selected message. You can see the selected sent message 01 Hello 02 Good Morning EDIT ERASE Edit the message.
LGE CDMA Fixed Wireless Telephone LSP-340 7.3.3 Erasing a Sent Message 1. Press MESSAGE button and 2(MSG SENDING) MSG Sending 1:New Message 2:Sent Message 2. Press 3(Clear All) to clear text message list. MSG SENDING 3:Clear All . ERASE ALL ? 3. Press [OK] to erase a message.
LGE CDMA Fixed Wireless Telephone LSP-340 8.Beside Functions 8.1Viewing your own number Press Redial button in on-hook state to see your own telephone number 8.2 000-000-0000 OK Redial Pick up the handset or press button to redial last outgoing number. OWN NUMBER button and Redial 8.3 Hook Switch 1. 2. 8.4 While in the middle of a call, pressing the hook switch for 300ms(600~300ms) will be treated as a flash. After 1 second, the call will be terminated.
LGE CDMA Fixed Wireless Telephone LSP-340 9. Storing Phone Number 9.1 Storing/Editing Phone Numbers 9.1.1 Storing Phone Numbers Frequently used phone numbers can be stored on the memory locations (01~99: 2 digits) and you can make a call by pressing memory location number in off-hook state. 1. Enter the area code and phone number in on-hook state. (Max. 32 digits) 2. Press [SAVE]. SAVE 021234567 FIND OK 021234567 ABC 3. Enter the name in text mode and press [OK] to save.
LGE CDMA Fixed Wireless Telephone LSP-340 To enter a character. You can enter English character in editing mode. You can enter English character as default, and press Message to select specific character. To enter English character. Press once a keypad to enter the first letter labeled in the keypad, twice to enter the second letter and 3 times to enter the third letter. EX) To enter “L”, Press dial button 5 labeled “JKL” 3 times to enter “L”.
LGE CDMA Fixed Wireless Telephone LSP-340 Press [ERASE] to delete. Erase? OK #01 Yes NEXT Press [OK] to complete erasing process. - ERASED - 9.2 Finding Stored Phone Numbers You can see all the list of stored phone numbers in memory list and if you forgot the memory location, can find it in sequence. And You can place a call with the phone number. 1. Press [RECALL] + 1(FROM MEMEORIES) +3(By Number) in on-hook state. Lookup Number? ?? FIND 2. Press [FIND] button to find the desired phone number.
LGE CDMA Fixed Wireless Telephone LSP-340 button in on-hook state. 11. General Information Main Unit Item Tx Frequency Rx Frequency Channel Bandwidth Tx Power Rx Sensitivity Size Weight(g) Operating Temperature LSP-340 Digital : 824 ~ 849 MHz Digital : 869 ~ 894 MHz 1.25 MHz Digital : Max. 0.