REVISED HISTORY DATE ISSUE CONTENTS OF CHANGES 2004/06 ISSUE1.0 Initial Release 2004/08 ISSUE1.
LGE CDMA Fixed Wireless Telephone LSP-345 CONTENTS 1G Important Information.......................................................................9G Safety Information ...............................................................................................9G Optimal Phone Performance ...............................................................................9G Care and Service...............................................................................................10G Safety Information ..
LSP-345 LGE CDMA Fixed Wireless Telephone 4.3.2G Hot Line Time...............................................................................................27G 4.3.3G Auto Time-out...............................................................................................27G 4.3.4G Speed Dial (enable / disable) .......................................................................28G 4.3.5G Key-tone Length...........................................................................................
LGE CDMA Fixed Wireless Telephone LSP-345 7.3.4G Erasing a Sent Message ..............................................................................50G 7.4G MSG Ringer ............................................................................................. 51G 8G Other Functions ..............................................................................52G 8.1G 8.2G Redial .......................................................................................................
LSP-345 LGE CDMA Fixed Wireless Telephone Highlights Congratulations on your purchase of the LSP-345 Fixed Wireless Telephone. This telephone has been designed to operate on the latest digital mobile communications technology. This technology has greatly enhanced voice clarity and can provide various advanced features.
LGE CDMA Fixed Wireless Telephone 1 LSP-345 Important Information Safety Information Warning To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Do not use this product near swimming pools or other water bodies. IMPORTANT Before installing or operating this product, please read this information. Optimal Phone Performance z Do not operate your product when holding the antenna, or when someone is within four inches (ten centimeters) of the antenna.
LSP-345 LGE CDMA Fixed Wireless Telephone z Use only the battery, antenna and AC power supply provided by LGE. Using any other type will invalidate the warranty. z Only authorized personnel should service the phone and its accessories. Faulty installation or service can be dangerous and may invalidate the warranty. z Do not use the unit in designated “no cellular phone use” area. z Avoid exposure to high temperature or humidity. z Avoid wetting the unit with any liquids.
LGE CDMA Fixed Wireless Telephone LSP-345 Safety Information Do not use with car battery. It may cause electric shock, fire, breakdown or transformation. For safety use, use only adapter approved by LG. To all problems arising from not following this guide, LG does not bear responsibility. WARNING Ex) LSP-345 (LG Power Adapter Source : DC 9.6V / 1A) Avoid exposure to high temperature or humidity. Avoid wetting the unit with any liquids.
LSP-345 LGE CDMA Fixed Wireless Telephone Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it. Wipe it with a soft cloth that has been slightly dampened in a mild soap-and water solution. Do not paint it. Paint can clog the device’s moving parts and prevent proper operation. During lightning, do not touch power plug or phone line. It may cause an electric shock or death. Do not install under direct sunlight or on an uneven surface.
LGE CDMA Fixed Wireless Telephone LSP-345 Do not touch the plug with wet hands. When disconnecting the power cord of any accessory, grasp and pull the plug, not the cord. It may cause fire or electric shock. Do not put heavy things on the power cord. Do not bend power cord too much. It may cause fire or electric shock. Do not short-circuit. It may start a fire or may explode causing injury. WARNING Do not throw and impact battery. Do not dispose of batteries by putting them in fire.
LSP-345 2 LGE CDMA Fixed Wireless Telephone Introduction 2.
LGE CDMA Fixed Wireless Telephone LSP-345 2.2 LCD Display The LCD shows icons on the top of the LCD screen. Different indicator appears based on the phone's operating mode. RSSI indicator : Indicates the signal strength in the service area. No service : The phone is not receiving system signal. In use : Displayed when call is in progress or the phone is in off-hook and dial tone heard. : No service : In use Text message : Displayed when a text message is received.
LSP-345 LGE CDMA Fixed Wireless Telephone 2.3 Installation You should follow each step carefully as shown below in order to guarantee proper operation of CDMA Fixed Wireless Telephone. STEP I. Check Components z Fixed Wireless Terminal is supplied with the following standard unit and accessories; 1. LSP-345 Main Unit with Handset -1EA- 2. Dipole Antenna -1EA- 3. Backup Battery -1EA- 4. User Guide -1EA- 5. AC/DC Power Adapter -1EA- 6.
LGE CDMA Fixed Wireless Telephone LSP-345 ¾ If it is good, beep tone is heard. ¾ If it is not good(Booting fails or beep tone is not heard), you have to connect the adapter or backup battery, again. z Please observe the following matters to get better voice quality; 1. Keep away from electrical appliances such as TV, computer, radio and so on. 2. Keep terminal in a high and central location with no obstructions. 3. Raise the integral antenna of terminal to get maximum strength as shown figure. STEP IV.
LSP-345 LGE CDMA Fixed Wireless Telephone 2.4 Installation Steps Please follow the below procedure to install the unit properly. Connect Base- Connect the handset to the antenna to the TNC handset connector. connector (Turn right). Bend the antenna up Open the battery right. cover at the bottom of the unit. Insert back-up Replace the Battery battery in the bottom cover of the unit. (Give care to polarity) When you use Connect the AC terminal first, please power supply.
LGE CDMA Fixed Wireless Telephone 3 LSP-345 Basic Operation 3.1 Making a Call If user press '' button after dialing the number, the terminal make a call immediately. 1. Pick up the handset or press button. 2. Listen for dial tone. 3. Enter the phone number with area code if needed. 1234567 4. Wait for the Auto Time-out. Calling... 1234567 5. The call is connected and you can start conversation. 6. To disconnect the call, replace the handset or press button. 3.
LSP-345 LGE CDMA Fixed Wireless Telephone z Correcting dialing mistakes 1. Press Clear button shortly to erase the most recent digit. 2. Press and hold Clear button for at least one second. z If the phone is locked, enter the Lock Code z If the call did not go through, press the hook switch and dial again. z Flashing / Hook Switch 1. While in the middle of a call, pressing the hook switch for less than 1 second will be treated as a flash. After 1 second, the call will be terminated. 2.
LGE CDMA Fixed Wireless Telephone LSP-345 3.5 Missed Call Message If a call is received and not answered for user’s absence, you are informed that you have missed a call. The latest missed call time and number of missed call is displayed. Press [OK] to erase “Missed call” message.
LSP-345 4 LGE CDMA Fixed Wireless Telephone List of Menu State Main Menu 1. Volume / Ring Sub-Menu Setting Value 1. Ring Volume 4 steps 2. Key Volume 4 steps +silent 3. Ear Volume 4 steps 4. Ring Type 10 types 1. Time Off / Once / Always 2. Ringer ALARM1...ALARM5 1. Wake-up 2. Minute Alert On/Off 3. Connect Alert On/Off 2. Additional Voice / Fax for next / Always Fax 4. Rx Call Mode Modem for next / Always modem 9,600/19,200/38,400/57,600 5. SIO Baud Rate /115,200/230,400 3.
LGE CDMA Fixed Wireless Telephone LSP-345 4.1 Volume / Ring This menu allows you to adjust the various different volumes. 4.1.1 Ring Volume The received tone when you receive a call can be adjusted. z From the MENU 1. Press [MENU] + 1(VOLUME/RING)+ 1(Ring Volume) In on-hook state. 2. Press Volume left/right button or [NEXT] to adjust ring MAIN MENU 1:VOLUME / RING 2:ADDITIONAL volume. 3. Press [OK]. z By the Volume left/right button 1.
LSP-345 LGE CDMA Fixed Wireless Telephone 4.1.4 Ring Type You can select the various ring types. 1. Press [MENU] + 1(VOLUME/RING) + 4(Ring Type) in onhook state. 2. Select a desired ring type with Volume left/right button or [NEXT]. RING TYPE ¥Sare Jahan Se [OK 3 There are 10 different ring types. 3. Press [OK] to save and exit.
LGE CDMA Fixed Wireless Telephone LSP-345 4.2 Additional Features 4.2.1 Wake-up 4.2.1.1 Time This function allows you to adjust Wake-up. 1. Press [MENU] + 2(ADDITIONAL) + 1(Wake-up ) + 1 MAIN MENU 1:VOLUME / RING 2:ADDITIONAL (Time) in the on - hook state. 2. Select Off, Once or Always by [NEXT] and press [OK]. Wake-up 1:Time 2:Ringer [OK] [NEXT] 3. Press [EDIT] and set the time. 4. Select A.M. or P.M. by [AM/PM]. 5.
LSP-345 LGE CDMA Fixed Wireless Telephone 4.2.2 Minute Alert Alerts you every minute during a call. 1. Press [MENU] + 2(ADDITIONAL) + 2(Minute Alert) in on – hook State. MINUTE ALERT On 2. Select On or Off by [NEXT] or Volume left/right button. [OK] 3. Press [OK] to save and exit. [NEXT] 4.2.3 Connect Alert This function allows you to select the call connect tone. 1. Press [MENU] + 2(ADDITIONAL) + 3(Connect Alert) in CONNECT ALERT On on – hook State. 2.
LGE CDMA Fixed Wireless Telephone LSP-345 4.3 Dial Features 4.3.1 Hot Line 1. Press [MENU] + 3 (DIAL FEATURES) + 1(Hot Line) in on – hook state. DIAL FEATURES 1:Hot Line 2:Hot Line time 2. Select On or Off by [NEXT] or Volume left/right button Hot Line and press [OK] to select. On [OK] [NEXT] [OK] 119 [QUIT] 3. Press [EDIT] to input Hot Line phone number. 4. Enter the Hot Line phone number. 5. Press [OK] to save and exit. 4.3.2 Hot Line Time 1.
LSP-345 LGE CDMA Fixed Wireless Telephone 4.3.4 Speed Dial (enable / disable) 1. Press [MENU] + 3 (DIAL FEATURES) + 4(Speed Dialing) SPEED DIALING in on – hook State. Enable 2. Select Enable or Disable by [NEXT] or Volume left/right [OK] [NEXT] button and press [OK] to save and exit. This function can be used when the Speed Dial is set to Yes. z Speed Dial Function 1. You can store phone numbers in memory locations (1~99) and place a call. 2.
LGE CDMA Fixed Wireless Telephone LSP-345 4.4 Security Features 4.4.1 Set Lock Mode This function prevents your phone from being used without permission. Possible settings are ON/OFF. The OFF means that the phone is not locked. ON sets the phone locked immediately. LOCK code will always be the last 4 digits of the phone number. 1. Press [MENU] + 4 (SECURITY). Enter Lock Code 2. Enter your own 4 digit lock code. 3. Press 1(Set Lock Mode) SECURITY 1:Set Lock Mode 2:Clear Calls 4.
LSP-345 LGE CDMA Fixed Wireless Telephone 4.4.3 Clear Memory When you want to delete phonebook memory, you can erase all phonebook memory. 1. Do the above step1 and 2 of 4.4.1. 2. Press 3(Clear Memory). CLEAR WHOLE BOOK 3. Select “Yes” and press [OK] using [NEXT] or Volume Yes [OK] left/right button. [NEXT] 4.4.4 Emergency Call Even if your phone is locked, you can make calls to 3 emergency numbers. 1. Do the above step1 and 2 of 4.4.1. 2. Press 4(Emergency Call) 3.
LGE CDMA Fixed Wireless Telephone LSP-345 4.4.5 Restriction Call Service This function is a convenient feature which enables user to restrict using any phone number. To forbid using any phone number, user must set the number in deny edit. Can’t use any phone number(max 32digits) started with the number saved in deny edit. If user set the phone number in permit edit, can use any phone number (max 32digits) started with the number even if the phone number is set in deny edit.
LSP-345 LGE CDMA Fixed Wireless Telephone 4. Select “No restriction” ,” Restriction” or “Emergency Only ” using [NEXT] or Volume left/right button and press [OK]. Restrict Set Restriction [OK] [NEXT] i Below 4.4.5.2 and 4.4.5.3 function can be used when the Restrict set is set to “Restriction”. 4.4.5.2 Permit Memory You can call it if the phone numbers saved in permit edit though they were saved in deny edit. You can save 10 permit phone numbers. 1. Do the above step 1~2 of 4.4.5.1. 2.
LGE CDMA Fixed Wireless Telephone LSP-345 4.4.5.3 Deny Memory You couldn’t call any phone numbers saved in deny edit. You can save 10 deny phone numbers. 1. Do the above step 1~2 of 4.4.5.1. 2. Press 5(Restrict Call) and 3(Deny Memory). RESTRICT CALL 3: Deny Memory 3. Press [EDIT] to edit deny number. Restrict 4. Enter the deny phone number. 700 5. Press [OK] to save and exit.
LSP-345 LGE CDMA Fixed Wireless Telephone 5 Functions while in a call 5.1 Ear Volume You may adjust ear volume while you are in a call. Time: 0:23 1234567 [MENU] [MUTE] The Volume left/right button on the right side of the phone can EAR VOLUME be used to adjust ear volume. [OK] [NEXT] 5.2 Mute This function prevents your voice from being transmitted but you can call still hear other side. 1. Press [MUTE] button while in a call. Time: 0:23 1234567 [MUTE] 2.
LGE CDMA Fixed Wireless Telephone LSP-345 5.3 Memo You can save numbers while in a call. 1. Press [MENU] and 1(MEMO) while in a call. IN_CALL MENU 1:MEMO 2:MIC LEVEL 2. Enter a number using keypad. ADD 3. Press [ADD] to save and exit. Or press [QUIT] to exit. 114 QUIT Number Stored in Call List 5.4 MIC Volume Adjusting MIC volume while in a call. 1. Press [MENU] and 2(MIC LEVEL) while in a call. IN_CALL MENU 1:MEMO 2:MIC LEVEL 2. Select Low or High by [NEXT] or Volume left/right button. 3.
LSP-345 LGE CDMA Fixed Wireless Telephone 5.5 Transmitting your own number This function is a convenient feature which enables you to transmit your own phone number while in a call through press one key. (For example, sending your phone number when you pages.) 1. Press [MENU] and 3(SEND OWNER #) button while in a call.
LGE CDMA Fixed Wireless Telephone 6 LSP-345 Searching, Editing & Dialing 6.1 Retrieving Last Call History 1. Press [RECALL] and 1(FROM LAST CALL). RECALL 1:FROM LAST CALL 2:FROM MEMORIES 2. Select a number or a name in the last call list by Volume 1234567 028507618 VIEW left/right button and press [VIEW]. 3. To see more information, press [TIME] and press [SAVE] CALL TO to save a number in the memory.
LSP-345 LGE CDMA Fixed Wireless Telephone 3 Enter a desired memory location (01~99: 2 digits) or press [NEXT] to choose a desired memory location and press [OK]. ¾ The phone number is stored in the displayed ABC Auto=01 OK ?? NEXT memory location. 3 The phone will display a message asking to keep your number as secret or not. Select “No” or “Yes” using Make Secret? No [NEXT]. Then press [OK]. OK ¾ You can see a confirming message.
LGE CDMA Fixed Wireless Telephone LSP-345 6.2 Retrieving Phone Number by Name 1. Press [RECALL] and 2(From Memories). 2. Press 1 button to retrieve phone number by name. FROM MEMORIES 1:By Name 2:By Address 3. Enter the name that you want to look for and press [FIND]. Lookup name? 3 At least two letters are recommended for quick search. [ABC] [FIND] 3 Press [NEXT] or Volume left/right button to scroll 01:ABC 02:ACG through the list of matches. [VIEW] [ERASE] 4.
LSP-345 LGE CDMA Fixed Wireless Telephone 6.3 Retrieving Phone Number by Address 1. Press [RECALL] and 2(FROM MEMORIES) 2. Press 2 button to retrieve a phone number by address. Lookup Location? ?? [FIND] 3. Enter a memory address to retrieve phone number. (ex: If you enter a memory address, 01.) 3 If there is no stored phone number in the memory location, “Empty Location” is displayed.
LGE CDMA Fixed Wireless Telephone LSP-345 z Erasing process 3 You might press [ERASE] at the above step 3. 3 Select “Yes” using [NEXT] or Volume key. ERASE ? 3 Press [OK] to delete. [OK] #01 Yes [NEXT] 6.4 Retrieving Phone Number by Number 1. Press [RECALL] and 2(FROM MEMORIES). Lookup Number? 2. Press 3 button to retrieve a phone number by number. FIND 3. Enter the phone number that you want to find and press [FIND] button.
LSP-345 LGE CDMA Fixed Wireless Telephone 6.5 Fast Searching 1. Press [RECALL] button. RECALL 1:FROM LAST CALL 2:FROM MEMORIES 2. Press [RECALL] button again. 01:ABC 02:ACG 3 You see the whole phone number list in the memory location and you can find the number by scrolling the list.
LGE CDMA Fixed Wireless Telephone 7 LSP-345 SMS (Short Message Service) Messaging, Paging, and Voice mail features are available when your phone is turned on. Using Message button allows you to access messages for viewing on the LCD screen or to send a message. While viewing a message, you can call back to the number displayed in the message by picking up handset. Check with your WLL service provider regarding the availability of this feature.
LSP-345 LGE CDMA Fixed Wireless Telephone 4. Press [ERASE] to erase a message. 3 Press [OK] to complete erasing process. FR#:5678 Hello [OK] [ERASE] z When you scroll received MSGs, you can use Volume left/right key. ERASE ? Yes In other words, if you push Volume left key, the arrow [OK] will be placed upward. [NEXT] 7.1.2 Voice Message Voice mail notifications indicate the number of new voice mail message in your mailbox.
LGE CDMA Fixed Wireless Telephone LSP-345 7.1.3 Erasing all Received Message 1. Press MESSAGE button and 1(MSG RECEIVED). 2. Press 3(Clear All). MSG RECEIVED 3:Clear All 3. Select “No” or “Yes” using [NEXT] or Volume key. ERASE All? Press [OK] to delete. [OK] Yes [NEXT] 7.2 MSG Notification Type Select 1. Press Message button and 3(MSG NOTIF). MSG NOTIF 2. Select Off, Once, Every 2 Min by pressing [NEXT] or Volume left/right button. Off [OK] 3. Press [OK] to save and exit.
LSP-345 LGE CDMA Fixed Wireless Telephone 7.3 Message Sending When sending message, you can select set priority among Normal, Emergency and Urgent. 7.3.1 Sending a New Message 1. Press MESSAGE button and 2(MSG SENDING). SMS MENU 1:MSG RECEIVED 2:MSG SENDING 2. Press 1(New Message) to send a new message. MSG SENDING 1:New Message 2:Sent Message 3. Enter the called number and press [OK]. Called Number 3 You can find the called number in the memory by [OK] 1234 [FIND] [FIND] button. 4.
LGE CDMA Fixed Wireless Telephone LSP-345 7. Select type for setting priority among Normal/Emergency Set Priority ? /Urgent. Set the priority. Press [OK] to send the message. Normal [OK] [NEXT] 7.3.2 Sending the sent Message or Message after editing the Sent Message 1. Press MESSAGE button and 2(MSG SENDING) 2. Press 2(Sent Message) to see a sent text message list. 3 Locate MSG SENDING 1:New Message 2:Sent Message to the desired message in the list. 01 Hello 02 Good Morning [EDIT] [ERASE] 3.
LSP-345 LGE CDMA Fixed Wireless Telephone 7. Select Yes/No to store Message. Press [OK]. Store Message? Yes [OK] [NEXT] 8. Select type for setting priority among Normal / Set Priority ? Emergency /Urgent. Set the priority. Press [OK] to send the message.
LGE CDMA Fixed Wireless Telephone LSP-345 7.3.3 Sending the Received Message or Message after editing the Received Message 1. Press MESSAGE button and 2(MSG SENDING). MSG SENDING 3:Received MSG 2. Press 3(Received MSG) to see a received text message 4:Clear All list. 3 Locate to the desired message in the list. 3. Press [EDIT] to edit the content of the selected message. 9 01 Hello 3 You can see the selected received message. 9 02 Good Morning [EDIT] 3 Edit the message.
LSP-345 LGE CDMA Fixed Wireless Telephone 7. Select Yes/No to store Message. Press [OK]. Store Message? Yes [NEXT] [OK] 8. Select type for setting priority among Set Priority ? Normal/Emergency Urgent. Normal Set the priority. Press [OK] to send the message. [OK] [NEXT] 7.3.4 Erasing a Sent Message 1. Press MESSAGE button and 2(MSG SENDING). MSG Sending 1:New Message 2:Sent Message 2. Press 4(Clear All) to clear text message list. MSG SENDING 3:Received MSG 4:Clear All 3.
LGE CDMA Fixed Wireless Telephone LSP-345 7.4 MSG Ringer You can select the various ring types. 1. Press [Message] + 4(MSG RINGER) in the idle state. Select a desired ring type with [NEXT] or Volume button. Press [OK] button. MSG RINGER G [OK] 2. There are 5 different ring types. Those are RING1, RING2, RING3, RING4 and RING5.
LSP-345 8 LGE CDMA Fixed Wireless Telephone Other Functions 8.1 Redial Pick up the handset or press button and Redial button to redial last outgoing number. 8.2 Finding Last Call History Press Redial button in on-hook state to see your last telephone 1234567 028507618 numbers. [VIEW] 8.3 Hook Switch 1. While in the middle of a call, pressing the hook switch for a while (100~600ms) will be treated as a flash. After that, the call will be terminated. 2.
LGE CDMA Fixed Wireless Telephone 9 LSP-345 Storing Phone Number 9.1 Storing/Editing Phone Numbers 9.1.1 Storing Phone Numbers Frequently used phone numbers can be stored on the memory locations (01~99: 2 digits) and you can make a call by pressing memory location number in off-hook state. 1. Enter the area code and phone number in on-hook state (Max. 32 digits) 028507618 2. Press [SAVE]. [FIND] [SAVE] 3. Enter the name in text mode and press [OK] to save.
LSP-345 LGE CDMA Fixed Wireless Telephone 3 You can see a confirming message. ABC was stored in 01 3 Also you can see a condition of used memory. - MEMORY used : 01 empty : 98 z To enter a character You can enter English character in editing mode. You can enter English character as default, and press Message to select specific character.
LGE CDMA Fixed Wireless Telephone LSP-345 9.1.2 Erasing Stored Phone Numbers When a phone number is stored in a memory location, you can erase the stored phone number. 1. Press [RECALL] + 2(FROM MEMORIES) + 3 (By Number) and enter a number of the desired memory Lookup Number? location to erase. [FIND] 3 If there is no stored phone number in the memory location, “No number matches” is displayed.
LSP-345 LGE CDMA Fixed Wireless Telephone 9.2 Finding Stored Phone Numbers You can see all the list of stored phone numbers in memory list and if you forgot the memory location, can find it in sequence. And You can place a call with the phone number. 1. Press [RECALL] + 2(FROM MEMORIES) +3(By Number) Lookup Number? in on-hook state. [FIND] 2. Press [FIND] button to find the desired phone number. 3 Locate in the desired name or address to find. 3 If not entered any name, phone number is displayed.
LGE CDMA Fixed Wireless Telephone 10 LSP-345 Speaker Phone This function is a convenient feature which enables you to call using speaker phone button in onhook state. 11 General Information z Main Unit Item LSP-345 Tx Frequency Digital : 824 ~ 849 MHz Rx Frequency Digital : 869 ~ 894 MHz Channel Bandwidth 1.25 MHz Tx Power Digital : LOWER: 0.
LSP-345 LGE CDMA Fixed Wireless Telephone z Battery Item Description Capacity 3.
LGE CDMA Fixed Wireless Telephone LSP-345 FCC RF Exposure Information Finding Stored Phone Numbers WARNING! The antenna used for this transmitter must not exceed 2.5dBi and must be installed to provide a minimum separation distance of 20 cm from all persons. CAUTION Use only the supplied and approved antenna. Use of unauthorized antennas or modifications could impair call quality, damage the phone, void your warranty and/or result in violation of FCC regulations.
