LSP-3600 USER GUIDE Please read this manual carefully before operating your set. Retain it for future reference.
Highlights ᶀ This phone has been designed to operate on the IS-2000 Air Protocol over the 1.9GHz band. And the phone has the advanced user interface similar to mobile phone. It has greatly enhanced voice clarity and provides various advanced features. ᶀ USB and Serial Connectivity for internet access. ᶀ Organiser: Scheduler, Alarm, Memo, Calculator, World Clock with DST, Stopwatch. ᶀ Games: Fortress and Mole. ᶀ Fast charging battery. ᶀ Wide view, Graphic, Backlit Display.
Important Information Important Information WARNING / CAUTION ᶀ To reduce the risk of fire or electric shock, do not expose this phone to rain or moisture. Do not use this phone in swimming pools or other water bodies. 1.2 Optimal Phone Performance ᶀ Do not hold the antenna when operating the phone, or operate the phone when someone is within four inches (ten centimeters) of the antenna. Both cases affect the call quality and may cause the phone to operate at a higher power level than required.
Important Information CAUTION ᶀ WARNING ᶀ ᶀ For safety, use only an adapter approved by LG. LG does not bear responsibility for any faults that may arise due to non- conformation to this guide. Example: LSP-3600 (LG Power Adapter Source: DC 5V / 1A) Do not, in any way, cause a short-circuit. It may start a fire or the phone may explode causing injury. Do not create a sudden impact on the battery by throwing it. Do not dispose off batteries by putting them in a fire.
Important Information Do not plug many power cords into one outlet. It may cause fire or electric shock. ᶀ Do not remodel the power cord or disassemble it. If the power cord or plug is impaired, do not use it. It may cause fire or electric shock. ᶀ Do not install the phone in an illventilated place. ᶀ Use only an LG-approved battery and adapter. If not, it may cause an explosion or result in a short-circuit. LG does not bear any responsibility for the damage.
Introduction Introduction 2.2 LCD Display Icon Operating Condition RSSI indicator: Indicates the signal strength in the service area. 2.3 Installation You should follow each step carefully as shown below in order to guarantee the proper operation of CDMA Fixed Wireless Phone. Introduction Introduction The LCD shows icons on the top of the LCD screen. Different indicators appear based on the phone's operating mode. No service: The phone is not receiving any system signal.
Introduction Introduction STEP I. Check Components ᶀ The following components are supplied for Fixed Wireless Phone. 1. LSP-3600 Main Phone with Handset -1EA- 2. Dipole Antenna -1EA- STEP III. Connect Components (Please refer to “Installation Steps”in 2.4) 3. AC/DC Power Adapter -1EA- ᶀ 4. User Guide -1EA- Connect the antenna to the TNC antenna connector located at the top of the phone. If you have placed the phone on a flat surface, position the antenna upright.
Introduction Please follow the procedure below to install the phone properly. 3.1 Making a Call 1. Pick up the handset or press You can make a call as follows. 2. Listen for dial tone. 1. Pick up the handset or press button. 2. Listen for dial tone. 3. Enter the phone number with area code if needed. 4. Wait for the Auto Time-out or Press Dial/Flash button. 5. The call is connected and you may start conversation. 6. To disconnect the call, replace the handset or press button.
Basic Operations Notice 3.4 Call Waiting 3.6 Receiving a Call While a call is in progress, you may hear two beeps indicating another incoming call. When call wait is enabled, you may put the active call on hold When the bell rings or backlight blinks in Light mode, you can receive a call as follows while you answer the other incoming call. 1. Press C l e a r or E N D / P W R button, Call Waiting window then disappears. 2. Press D i a l / F l a s h button, you may start conversation with called number.
Basic Operations Input Mode - T9En Mode : Type text using keystroke per letter in English with the help of T9 English dictionary function. This is default mode. - Abc Mode : Use Abc mode to input text in English. ⍥If you want an instant input of numbers in Abc mode without converting to 123 mode, press the button until number is displayed in Abc mode. Use Abc mode to add words to the T9 database too. 18 - Smileys Mode : Insert smileys in your text.
Basic Operations 8. Press: 4. Menu Tree Main Menu Examples Using ABC Text input Typing In ABC(Multi-tap) Mode 1. Names For example, to type “RELIANCE”, follow these steps: 2. Press: Shift key to change to ABC Caps Lock mode. 3. Press: 2. Messages 4. Display: RELIANCE 2. Add 3. Speed Dial 1. Press: Soft key 2 to change letter case Abc mode. 20 Sub-Menu 1. Find Setting Value Name Search / Number Search Menu Tree Basic Operations 9.
Menu Tree Main Menu Menu Tree Sub-Menu *. Message Settings Main Menu 4. Sound 22 Setting Value Erase Inbox / Erase Outbox / Erase Broadcast box / 6. Speaker Volume Option setting (Bar 1 ~ Bar 5) Erase Archive / Erase Drafts / Erase All Messages 7. Message Alert Alert Type / Alert Tone / Message Reminder Priority / Delivery Ack / Deferred Delivery / Validity Period / 1. Language / English / 2. Wallpaper Idle Screen / Banner 3. Menu Style List / Icon 4.
Menu Tree Main Menu Menu Tree Sub-Menu Setting Value You may select from five Sub-Menus (Find, Add, Group, Speed Dial, Erase All Names) for this item. If you press Soft Key1, Menu is activated. 4. To make a call, pick up the handset or press speaker phone button. OK / Add 2. Alarm Options / View 3. Memo View/ Add 4. Calculator OK / Back 5. World Clock DST / Back To scroll in Menu, press ᵋ,ᵾ,ᶀor ᵍ button. 6. Stopwatch Start 1. Fortress New Game / High Score / Key Info.
Menu Tree Menu Tree 2. Enter the information to select a desired item. - Name of person : - Mobile phone number : - Home phone number : - Office phone number : 1. Press Soft key 1 M e n u + 1 ( N a m e s ) + 2. You can view a stored item. 2. Enter Lock Code. ( Default 0000) 3. You can add a new Speed Dial number in two ways. 3.
Menu Tree Menu Tree 4.2.1 Write 1 ( W r i t e ) in on-hook state. 2. Write message. Refer to the 3.8 (page 17) Entering and Editing Information about text input. 3. Select O K . 4. Enter phone number or press O p t i o n s . O p t i o n s : can select F i n d , S M S G r o u p s . 5. Select options as following. Priority: Allows you to give priority to Message as N o r m a l or U r g e n t .
Menu Tree Menu Tree 4. You may select option. Archive allows you to store your messages in a different folder. 1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) + 6 ( A r c h i v e ) in on-hook state. 2. To erase message, select E r a s e . 3. To view desired message, select V i e w . 4. You may select from two options (1. Erase 2. Send). 4.2.8 Templates There are 10 predefined phrases included in the Templates. You may add up 20 templates more. A total of 30 templates may be saved. 1.
Menu Tree Menu Tree 3 ( D e f e r r e d D e l i v e r y ) in on-hook state. 1. I m m e d i a t e 2. A f t e r 3 0 M i n u t e s 3. A f t e r 1 H o u r 4. A f t e r 2 H o u r s 5. A f t e r 1 2 H o u r s 6. A f t e r 1 D a y 7. A f t e r 2 D a y s 4.3.1 Missed 2. Select O n or o f f . 1. Press Soft key 1 M e n u + 3 ( C a l l H i s t o r y ) + Auto Delete Inbox 1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) + *( M e s s a g e S e t t i n g s ) + 6 ( A u t o D e l e t e I n b o x ) in on-hook state.
Menu Tree Menu Tree 4.3.5 Call Duration 1. Press Soft key 1 M e n u + 3 ( C a l l H i s t o r y ) + 5 ( C a l l D u r a t i o n ) in on-hook state. 2. You may select from four options (1. Last Dialled Calls 2. All Dialled Calls 3. All Calls 4. Reset Call Duration). When you press the Dial/Flash button, All Calls are displayed. In the list of All Calls, All sorts of the icon have the meaning as follows: You may erase all history from three options (1. Erase Missed 2. Erase Received 3. Erase Dialled) 1.
Menu Tree Menu Tree 4.4.4 Earpiece Volume You may select a volume level of handset earpiece sound among the 1~ 5 steps. 1. Press Soft key 1 M e n u + 4 ( S o u n d ) + Message Reminder: 1. O f f 2. O n c e You may select a volume level of speaker phone sound among the 1 ~ 5 steps. 3. E v e r y 2 M i n u t e s 4. E v e r y 5 m i n u t e s 1. Press Soft key 1 M e n u + 4 ( S o u n d ) + 6 ( S p e a k e r V o l u m e ) in on-hook state. 2.
Menu Tree Menu Tree 4.5.3 Menu Style Allows you to select the Menu style. 1. Press Soft key 1 M e n u + 5 ( D i s p l a y ) + 3 ( M e n u S t y l e ) in on-hook state 2. Select 1 ( L i s t ) or 2 ( I c o n ) and press O K . 4.5.5 Contrast 4.6.1 Add to My Menu Allows you to select the contrast setting using the scale of brightest to darkest. Allows you to: 1) Make you own menu. 2) Access your favorite menu quickly by customizing My Menu. You may select a contrast level of LCD among the 0 ~ 8 steps.
Menu Tree Menu Tree Enable. 2 ( C a l l ) + 3 ( C a l l T i m e r ) in on-hook state. 2. Select E n a b l e or D i s a b l e and press O K . Call Connect Alert This function will alert you when the call connection has been established. 1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) + 2 ( C a l l ) + 4 ( C a l l C o n n e c t A l e r t ) in on-hook state. 2. Select O n or O f f .
Menu Tree Menu Tree rates set on the phone. 3( P h o n e ) + 2( D a t a S e t t i n g s ) + 2 ( D a t a B a u d ) in on-hook state. 2. Select desired options and press O K . Phone Info My Phone Number Displays your Phone Number along with STD code. 1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) + 3 ( P h o n e ) +3 3( P h o n e I n f o ) + 1 ( M y P h o n e N u m b e r ) in on-hook state. Memory Usage Displays the Phone’s Memory Usage (Names, Messages, Scheduler, Memo) 1.
Menu Tree 1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) + 2. Select O n or O f f and press O K . 3. If O n is selected, ⍥ Enter the numbers / starting digit of specific numbers to be restricted in the Restrict list. ⍥ Enter the numbers / starting digits of the numbers to be allowed in the Permit list. 4. To add new list, press A d d . 5. To erase (or edit) the existing list, press V i e w + Options Notice ⍥ It’s could be possible that the menus will be different in PCO phone. 44 HotLine 1.
Menu Tree Menu Tree If you press Soft Key1, Menu is activated. ●●●●●● Dial/Flash END/PWR Soft Key 1 ●●●●●● Soft Key 2 To scroll in Menu, press ᵋL@ᵾL@ᶀ or ᵍ button. To return to the initial screen, press E N D / P W R button. And to return to the previous screen, press Clear button. 4. If A d d is selected, you can store new schedules. 2. To enter new alarm, 5. If O K is selected, 2) Enter time and date. 1) In case of already stored schedule, you may see stored schedules and select from Options.
Menu Tree 1. Press Soft key 1 M e n u + 8 ( G a m e s ) + 1 ( F o r t r e s s ) + 1 ( N e w G a m e ) in on-hook state. 4.8 Games 1. Press Soft key 1 M e n u + 8 ( G a m e s ) in onhook state. 2. Select 1. F o r t r e s s or 2. M o l e . You can get key information about playing a game if you select Key Info after selecting game in menu. Fortress Fortress is a shooting game which saves The Earth from UFO who wants to conquer the Earth.
Speaker Phone 5. Speaker Phone 6. Troubleshooting This function is a convenient feature, which enables you to make a call using the Speaker Phone ( ) button in on-hook state. Please check the following items before contacting service center. Item Remedy Phone doesn’t operate at all. • Check that the phone is installed correctly. • Check that the battery is fully charged. • Check that the power is on. Because of noise and cross talking, call status is bad.
General Information General Information 7.3 Battery 7.1 Main unit Item Tx Frequency Rx Frequency Channel Bandwidth Tx Power Rx Sensitivity Size Weight(g) Operating Temperature LSP-3600 Digital: 1850 ~ 1910 MHz Digital: 1930 ~ 1990 MHz 1.25 MHz Digital: LOWER: 62.5mW ~ UPPER:0.5W -104 ~ -25dBm 205x 161x 76 (L x W x H) 554(included Li-ion battery) -10 ~ 50。C Item Capacity Talk time / Standby time Charging time duration Description 3.
FCC RF Exposure Information FCC RF Exposure Information The antenna used for this transmitter must not exceed 2.5dBi and must be installed to provide a minimum separation distance of 20 cm from all persons. cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that may cause undesired operation.
P/N : MMBB APR/2007/ISSUE 1.
Part 15.21 statement " Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. " Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
