LSP-4000 ( P ) USER GUIDE Please read this manual carefully before operating your set. Retain it for future reference.
Highlights Key phone features: ▶ Hands free Speaker Phone 1. Important Information ▶ Receiver Off-Hook tone ▶ ▶ ▶ 4 3.7 Receiving a Call 17 1.1 Safety Instruction 4 3.8 In Call Memo 17 Recent Call History can be dialled by Dial / Flash key 1.2 Optimal Phone Performance 4 3.9 Lock Mode 17 1.3 Care and Service 5 3.10 Entering and Editing Information 18 Adjustable Ringer volume, Key volume, Earpiece volume 1.4 Safety Information 6 4. Menu Tree 20 9 4.1 Menu 23 9 4.
Important Information WARNING / CAUTION To reduce the risk of fire or electric shock, do not expose this phone to rain or moisture. Do not use this phone in swimming pools or other water bodies. 1.2 Optimal Phone Performance ▶ 4 ▶ Do not hold the antenna when operating the phone, or operate the phone when someone is within four inches (ten centimeters) of the antenna. Both cases affect the call quality and may cause the phone to operate at a higher power level than required.
Important Information Important Information CAUTION ▶ WARNING ▶ For safety, use only an adapter approved by LG. LG does not bear responsibility for any faults that may arise due to non-conformation to this guide. ▶ Example: LSP-4000(P) (LG Power Adapter Source: DC 5V / 1A) ▶ ▶ 6 Do not, in any way, cause a short-circuit. It may start a fire or the phone may explode causing injury. Do not create a sudden impact on the battery by throwing it. Do not dispose off batteries by putting them in a fire.
Important Information ▶ ▶ ▶ Do not install the phone in an illventilated place. It may cause fire or a breakdown. Do not touch the plug with wet hands. When disconnecting the power cord of any accessory, grasp and pull out the plug itself and not the cord. It may cause fire or elec tric shock. Do not put heavy objects on the power cord. Do not bend the power cord too much. It may cause fire or electric shock. ▶ ▶ Use only an LG-approved battery and adapter.
Introduction Introduction 2.3 Installation The LCD shows icons on the top of the LCD screen. Different indicators appear based on the phone's operating mode. You should follow each step carefully as shown below in order to guarantee the proper operation of CDMA Fixed Wireless Phone. Mes Introduction Introduction 2.2 LCD Display sage END/ PWR Icon Operating Condition Mic Volu RSSI indicator: Indicates the signal strength in the service area.
Introduction Introduction direct exposure to sunlight and dampness. STEP I. Check Components first part of this document before you place the phone. Wireless Phone. 1. LSP-4000(P) Main Phone with Handset (Including inner backup battery) ▶ Read the SAFETY INFORMATION located in the -1EA- 2. Dipole Antenna -1EA- 3. AC/DC Power Adapter -1EA- 4. User Guide -1EA- ▶ Please make sure that these components are present before you begin to install the phone.
Basic Operations Introduction 3.1 Making a Call 3.2 Messaging Please follow the procedure below to install the phone properly. You can make a call as follows. You can send or receive a short message. If you want to send SMS, press Message button + 1 Write in on-hook state and write “send to” number / message that you want and send your message. When the message received in idle state or during a call, you can confirm your message as follows. 1 Connect basehandset to the handset connector.
Basic Operations Basic Operations 5. To disconnect the call, replace the handset or press button. ※ You can also dial any of the last 120 (Missed+Received+Dialled+In Call Memo) numbers stored in All Calls. 3.4 3 way call conferencing You can start 3 way call conferencing. 1. Dial second party phone number while you are in conversation with the first party. 2. To make conference call, press ‘3’ + Dial/Flash button. This service should be provided by your service provider. 16 3.
Basic Operations Basic Operations 3.10 Entering and Editing Information If you need to modify the lock code, you may modify it using the change code within the security Menu [4.1.4.6 page no. 29]. You can edit the phone book and short messages using various text input mode. You can lock your phone using the ‘#’( :Lock) key, also you can lock your phone manually as explained [4.1.4.1 page no. 27]. Under Lock Mode 1. Press ‘#’ button for some time. The phone is now locked. Message END/PWR Soft Key 1 3.
Menu Tree Menu Tree Main Menu Main MENU Sub-MENU Setting Value 1. Menu 1. Sound 2. Settings 3. Dial Features 4. Security Sub-Menu Setting Value 4. Emergency Calls Emergency 1 / Emergency 2 / Emergency 3 1. Ring Type 15ea. Midi(10ea) + Bell(5ea) 5. Restrict Call Set Restrict / Permit Memory / Deny Memory 2. Ringer Volume 4 steps 6. Change Code Ok / Back 3. Key Volume 5 steps (including silent step) 5. My Number 4. EarpieceVolume 4 steps 2. Message 1.
Menu Tree Main Menu Menu Tree 4.1.1.1 Ring Type You may select from five Main Menu (Sound, Settings, Dial Features, Security, My Number) for this item. You can select the various ring types. 12 Hours / 1 Day / 2 Days 5. Auto DEL Inbox Disable / Enable If you press Soft key 1 Menu is activated. Setting Value Default / 30 Minutes / 1 Hour / 2 Hours / 3. Find ●●●●●● 1. Call History 2. Phone Book 1. All Calls View / Erase 2. Missed View / Erase 3. Received View / Erase 4.
Menu Tree 4.1.2 Settings The tone when you press a key can be adjusted. You can use additional features like Alarm, Version, Backlight etc. 1. Press Soft key 1 Menu + 1( Sound ) + 3( Key Volume ) in on-hook state. 3. Press Soft key 1 Ok to save setting. 4.1.1.4 Earpiece Volume The voice of the other party can be adjusted. 1. Press Soft key 1 Menu + 1( Sound ) + 4( Earpiece Volume ) in on-hook state. 2. Press Up/Down button or Soft key 2 Next to adjust earpiece volume. 3.
Menu Tree 3. Press Soft key 2 Edit and enter the Hot Line phone number. 4. Press Soft key 1 Ok to save and exit. If you have selected ‘Enable’ and enter the HotLine Number and Time, HotLine functions as follows: When you pick up the handset or press button , the phone automatically dials the HotLine Number that you have already saved if any number is not dialed for duration specified in HotLine Time. 2. Press Up/Down button or Soft key 2 Next to select hot line connection time (2~9 Sec.). 3.
Menu Tree Note : Deleted phone book memory can not be retrieved. 1. Press Soft key 1 Menu + 4( Security ) + 5. Press Soft key 1 Ok to exit. Note : Deleted call history can not be retrieved. 4.1.4.4 Emergency Calls To return to the initial screen, press END/PWR button. Emergency number can store up to three numbers (default 15, 16, 115). The phone can store a total of 120 Received, Dialled, Missed Calls and/or In Call Memos in Call History. 1. Press Soft key 1 Menu + 4( Security ) in onhook state. 2.
Menu Tree Menu Tree previous screen, press Clear button. on-hook state. Note : To modify your phone number, press Soft Key 2 Edit . Enter the phone number, and press Soft Key 1 Ok to save and exit. Text messaging, page and voice mailbox become available as soon as the power is on. You may access the above type of messages using the Message key. The phone can store up to 50 messages in each Inbox and Outbox. If you press Message Key, SMS Menu is activated.
Menu Tree Menu Tree 1. Press Message + 3( Outbox ) + 2. Press Up/Down button or Soft key 2 Next to select No or Yes. 2. Press Up/Down button or Soft key 2 Next to select Yes or No. 3. Press Soft key 1 Ok to exit. 2( Erase All ) in on-hook state. 3. Press Soft key 1 Ok to exit. 4.2.3 Outbox 4.2.4 Settings 4.2.3.1 View 4.2.4.1 MSG Alert All your successfully sent messages are saved here. This function allows you to set the frequency of notification when message is received. 1.
Menu Tree Menu Tree 3. Press Soft key 1 Ok to save. This function allows you to search the phone numbers that you have stored in the phone book memory. You may search the numbers from call history also. If you press Soft key 2, Find menu is activated. 3. To view desired item, select Soft key 1 View . When you press the Dial/Flash button, all calls are displayed. In the list of all calls, all sorts of the icons have the meaning as follows : 4. To erase desired number, select Soft key 2 Erase .
Menu Tree ▶ 4.3.1.3 Received 1. Press Soft key 2 Find + 1( Call History ) + 3( Received ) in on-hook state. 2. Press Up/Down button to select a number or name in the received call list. 3. To view desired item, select Soft key 1 View . 4. To erase received call, select Soft key 2 Erase . 5. Press Soft key 2 Time to see more information and press Soft key 1 Save to save the number in the phone book.
Menu Tree [Fast Searching] phone numbers you have stored, press Soft key 2 Find . 4.3.2.3 By Number 4.3.2.1 By Name 1. Press Soft key 2 Find + 2( Phone Book ) + 1( By Name ), to retrieve a phone number by name. 2. Enter the name you want and press Soft key 1 Find . To find all phone numbers you have stored, press Soft key 1 Find . 1. Press Soft key 2 Find + 2( Phone Book ) + 5.
Troubleshooting General Information 6. Troubleshooting Item Phone doesn’t operate at all. Remedy • Check that the phone is installed correctly. • Check that the battery is fully charged. • Check that the power is on. Because of noise and cross talking, call status is bad. When buttons are pressed to call, can’t hear the . dial tone.. Keep away from electrical application such as TV, computer, radio and so on. Check that phone cord or power is connected correctly.
General Information Limited Warranty Statement Limited Warranty Statement 7.3 Battery Description 3.7V Li-ion (Nominal) 4 Hours / 120 Hours 3 Hours (Standby condition) LG ELECTRONICS Inc. represents and warrants that this subscriber unit and its accessories (“PRODUCT”) is free from defects in material and workmanship. This warranty is subject to the following terms and conditions; 1.
Limited Warranty Statement (b) LG ELECTRONICS Inc. has not been notified by the CONSUMER of the defects of the PRODUCT during the applicable warranty period. (c) The PRODUCT serial number code or the accessory date code has been removed, defaced or altered. (d) The PRODUCT has been used with or connected to an accessory (i) not supplied by LG ELECTRONICS Inc. or its affiliates, (ii) not fit for use with the PRODUCT or (iii) used otherwise than in the manner intended.
LGE CDMA Fixed Wireless Phone LSP-4000(P) LGE CDMA Fixed Wireless Phone LSP-4000(P) Licensed by QUALCOMM Incorporated under one or more of the following Patents: U.S, Patent No. 4,901,307 U.S, Patent No. 5,056,109 U.S, Patent No. 5,099,204 U.S, Patent No. 5,101,501 U.S, Patent No. 5,103,459 U.S, Patent No.
P/N : MMBB0212101 JUN/2006/ISSUE 1.
