LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) CDMA Fixed Wireless Terminal User Guide Model: LST-250(F) & 2500(F) 1
FCC RF EXPOSURE INFORMATION WARNING! Read this information before use In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) REVISED HISTORY DATE ISSUE 2001.01. 08 ISSUE 1.0 CONTENTS OF CHANGES REMARK Initial Release Please read this manual before you use this product. This manual is based on the production version of LST-250(F)/2500(F) FWT. Software changes may have occurred after this printing. LG reserves the right to make changes in technical and product specifications without prior notice.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) Blank Page 3
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) Table of Contents 1. Before You Start....................................................................................................6 1.1 1.2 1.3 2. Safety Information.................................................................................................................... 6 Optimal Phone Performance ................................................................................................... 6 Care and Service .....................
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) Storing the Deny Dial Number(Restricted dial number) ........................................................ 24 6. Troubleshooting ..................................................................................................25 7. General Information ............................................................................................26 7.1 7.2 LST-250(F)..........................................................................................
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) 1. Before You Start 1.1 Safety Information Warning To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Do not use this product near swimming pools or other bodies of water. IMPORTANT Before installing or operating this product, read this information.. 1.2 Optimal Phone Performance l Do not operate your product when holding the antenna, or when someone is within four inches (ten centimeters) of the antenna.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) l Avoid wetting the unit with any liquids. If the unit gets wet, turn the power off immediately and remove the backup battery and AC power supply. If the unit is inoperable, then return to the service agent for service. l Avoid shock or impact. l We recommend you to charge the backup battery before initial use. Backup battery may be discharged during delivery. l 1.3 This device complies with part 15 of the FCC Rules.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) 2. Introduction Congratulations on your purchase of the LG Fixed Wireless Terminal that has been designed to operate on the latest digital mobile communications technology, Code Division Multiple Access (CDMA). This CDMA digital technology has greatly enhanced voice clarity and can provide various advanced features. The terminal enables the normal operation and direct connection of standard telephone equipment into the cellular network.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) 2.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) 2.2 3 LEDs Indicators LED COLOR GREEN-solid POWER LED SIGNAL LED ORANGE-solid DC Power is applied Battery Power is applied RED-solid Low Battery GREEN-solid Good Signal ORANGE-solid Poor Signal RED-solid MODE LED Operating Condition GREEN – blink (0.5sec On / 0.5sec Off) GREEN – blink (1 sec On / 1 sec Off) GREEN-solid No Service Area Voice Message is received Data Service or G3 Fax Service is working G3 FAX receive mode is enabled 2.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) STEP II. Place the Terminal l Place the terminal on the stable flat secure surface area (desk, table, etc.). Avoid direct exposure to the sun lights and damp area. l Read the Safety Information located at the first part of this document before you place the terminal. STEP III. Connect Components l Connect the antenna to the TNC connector located at the topside of the terminal. (See Figure 1 to locate the TNC connector.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) RJ-11 RJ-11 PC TELEPHONE G3 Analog Fax [LST-250F] * Note : - G3 Fax can not connected to your LST-250 terminal. - Length between LST-250(F) and Telephone : over 1m. The adapter type(with power cord) may be different by country adaptation.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) RJ-11 RJ-11 PC TELEPHONE G3 Analog Fax [LST-2500F] * Note : - G3 Fax can not connected to your LST-2500 terminal. - Length between LST-2500(F) and Telephone : over 1m. < Figure 2. Connection Diagram with External Equipment > 2.4 Installation Steps Please follow the below procedure to install the unit properly. 1 Connect the antenna to the 2 Bend the antenna up right. TNC connector (Turn right). 3 Connect your phone Connect the AC Cord.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) 3. Basic Operation 3.1 Power On 1. The POWER LED indicates the presents status; 1) Using AC Adapter : Solid Green 2) Using internal battery : Solid ORANGE 3) Using internal battery and battery is week : Solid Red 2. If the radio service is not available or radio signal is too weak to detect; The SIGNAL LED is Red. (No Service status) 3. When the phone is succeeded in getting the service, SIGNAL LED indicates the strength of the signal.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) 3.6 Dial Delay(Enblock mode only) The terminal waits 5 seconds before transmitting the dialed telephone number into the cellular network. 3.7 Emergency Call(Enblock mode only) When emergency call number is connected once, it will not be terminated unless the called party disconnects the call(Emergency Call Hold Service).
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) 4. System Features 4.1 Hook flash When the terminal receives a hook-flash from the connected telephone device, it will automatically allow: 1. For producing dial tone again after a phone number has been dialed without connection. 2. The use of special cellular services which may be available in your cellular service area. Note: 4.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) F Example Dial the first number and wait until connected; When connected, give hook-flash and dial the second number and give one more hook-flash to be connected; When the second call is connected, give hook flash to complete a 3-way conference call. Voice Mail – Use voice mail service in the same manner as you would on a regular telephone.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) 5. Programming LST-250(F)/2500(F) provides various convenient and various features to user. This chapter describes how to program these features and to use them. The followings are main features can be used; Speed Dial(Enblock mode only) Emergency Call(Enblock mode only) Hot Line Call(Enblock mode only) Wake-up Alarm(Enblock mode only) Conversation Voice Level Outgoing Call Lock(Enblock mode only) G3 Fax receive Restrict Call n 1. 2. 3. 4. 5.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) Enable or Disable Speed Dial 1. Press “#” + “#” + “1” continuously to enter speed dial programming mode. 2. Press “#” and “1” or “2” to enable or disable respectively. “1” – Speed Dial Enable “2” – Speed Dial Disable 3. Press “*” to store. Operation 1. Make a speed dial function enable. 2. Lift handset and dial tone will be heard. 3. Press speed dial number and wait for dial timeout(5 seconds). 5.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) 3. Press “#” and Hot Line phone number (Max. 32 digits). 4. Press “*” to save and enable this function. Enable the Hot Line Feature 1. Press “#”+”#”+”3” continuously to enter Hot Line programming mode. 2. Press “#” and Hot Line Enable code “1”. 3. Press “*” to save. Disable the Hot Line Feature 1. Press “#”+”#”+”3” continuously to enter Hot Line programming mode. 2. Press “#” and Hot Line Disable code “2”. 3. Press “*” to save.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) 4. Press “*” to save and enable Alarm Time. Disable Alarm Feature 1. Press “#”+”#”+”4” continuously to enter alarm time programming mode. 2. Press “#” and alarm disable code “2”. 3. Press “*” to save. If Alarm is disabled and time has been already programmed, you can make enable Alarm feature by pressing “#’+”#”+”4”+”#”+”1”+”*” without entering alarm time again. 5.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) 5. Press “#” and re-enter “new LOCK code (4 digits)”. 6. Press “*” to save. 5.7 G3 FAX Mode Setting To activate a Data Fax call by G3 FAX connected to your LST-250F/2500F terminal from the other devices (Land or Mobile Data Fax), your service provider should support wireless data FAX. And the LST-250F/2500F mode should be changed to G3 FAX mode to change data path from RS-232C to G3 FAX machine.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) the fax document, disable G3 Fax Mode for another voice call. 3. If you want to use the LST-250F/2500F terminal only for G3 Fax sending or receiving other than the voice call, then keep the terminal in G3 Fax Mode enabled state. 5.8 Restrict Call Mode Setting While the Restrict Call function is enabled, the specified numbers cannot be called. These specified numbers start with specific digits.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) Storing the Deny Dial Number(Restricted dial number) 1. Press “#”+”#”+”8”+ continuously to enter Restrict Call programming mode. 2. Press “#” and “LOCK code” (4 digits : set in Outgoing call lock / default is 0000). 3. Press “#” and “1” to enter Deny Dial Number store step. 4. Press “#” and one of “Memory number” for deny dial number(1~10). 5. Press “#” and the “digits” (Max. 32digits). 6.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) 6. Troubleshooting In the event you are unable to place or receive telephone calls, first check the appropriate power indication on the LED. In case of no power, check the wiring connections between the power outlet and the terminal. Check for the appropriate service indication on the LED. If an adequate signal is not present, try different locations for the better signal reception.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) 7. General Information 7.1 LST-250(F) Main Unit Item Description Tx Frequency Digital : 824 ~ 849 MHz Rx Frequency Digital : 869 ~ 894 MHz Channel Bandwidth 1.25 MHz Frequency Stability Digital : Tx Power Digital : Max. 0.2W Rx Power Level -104 ~ -25 dBm Size 210 x 147 x 63 mm Weight(g) 610g ( w/o battery ) / 800g ( w/ battery ) 300 Hz AC/DC Adapter Item Description Input Voltage 100V ~ 250V AC Input Current 0.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) 7.2 LST-2500(F) Main Unit Item Description Tx Frequency Digital : 1850 ~ 1910 MHz Rx Frequency Digital : 1930 ~ 1990 MHz Channel Bandwidth 1.25 MHz Frequency Stability Digital : Tx Power Digital : Max. 0.2W Rx Power Level -104 ~ -25 dBm Size 210 x 147 x 63 mm Weight(g) 610g ( w/o battery ) / 800g ( w/ battery ) 150 Hz AC/DC Adapter Item Description Input Voltage 100V ~ 250V AC Input Current 0.
LG CDMA Fixed Wireless Terminal LST-250(F)/2500(F) Licensed by QUALCOMM Incorporated under one or more of the following Patents: U.S, Patent No. 4,901,307 U.S, Patent No. 5,056,109 U.S, Patent No. 5,099,204 U.S, Patent No. 5,101,501 U.S, Patent No. 5,103,459 U.S, Patent No.
