CDMA Fixed Wireless Terminal User Guide Model: LST-255(F) Please read this manual carefully before operating your set. Retain it for future reference.
LGE CDMA Fixed Wireless Terminal LST-255(F) REVISED HISTORY DATE ISSUE 2004.10 1.0 CONTENTS OF CHANGES REMARK Initial Release ● Please read this manual before you use this product. This manual is based on the production version of LST-255(F) FWT. Software changes may have occurred after this printing. ● LGE reserves the right to make changes in technical and product specifications without prior notice.
Table of Contents 1 2 Before You Start 7 Safety Information Optimal Phone Performance Care and Service Safety Information 7 7 8 9 Introduction 12 Component List Front, Side and Rear View of the Terminal 3 LEDs Indicators Installation Installation Steps 3 Basic Operation 21 Power On Placing a call Receiving a call Ending a call Warning Tone after Remote Disconnect Emergency Call Power Off 4 13 14 16 17 20 System Features Hook flash ROH (Receiver Off Hook) System Features Applications 5 21 21
Before You Start - Connect the equipment into an outlet on a circuit different from that to which the terminal is connected. - Consult you Authorized LGE Dealer of an experienced radio/TV technician for help. ƅ Use only the battery, antenna and AC power supply provided by LGE. Using any other type will invalidate the warranty. ƅ Only authorized personnel should service the phone and its accessories. Faulty installation or service can be dangerous and may invalidate the warranty.
Before You Start Do not use or store it in dusty, dirty areas as its moving parts can be damaged. ƅ Do not store it in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. ƅ Before You Start ƅ Do not remodel the power cord or disassemble. If power cord or plug is impaired, do not use it. It may cause fire or electric shock. ƅ Do not install in an ill-ventilated place. It may be a cause of fire or breakdown.
Introduction Congratulations on your purchase of the LG Fixed Wireless Terminal that has been designed to operate on the latest digital mobile communications technology, Code Division Multiple Access (CDMA). This CDMA digital technology has greatly enhanced voice clarity and can provide various advanced features. The terminal enables the normal operation and direct connection of standard telephone equipment into the cellular network.
Introduction Introduction Front, Side and Rear View of the Terminal < Mounting Template > Installation for Wall Mounting.
Introduction 3 LEDs Indicators Introduction Installation You should follow each step carefully as shown below in order to guarantee proper operation of CDMA Fixed Wireless Telephone. STEP I. Check Components ƅ LED COLOR Operating Condition GREEN-solid POWER LED SIGNAL LED DC Power is applied ORANGE-solid Battery Power is applied RED-solid Low Battery GREEN-solid Good Signal ORANGE-solid Poor Signal RED-solid No Service Area GREEN - blink (0.5sec On / 0.
Introduction Introduction Connect your phone cord to the RJ-11 port located at the side of the terminal. ƅ Connect the battery cable to the DC battery connector at the side of the terminal. - Remove the battery compartment cover. - Connect battery to the connector. - Replace the battery cover. ƅ Connect the AC power supply cable to the DC input port located at the side of the terminal.
Introduction Installation Steps Power On Please follow the below procedure to install the unit properly. 1 Connect the antenna to the TNC connector (Turn right). 3 Basic Operation 2 Bend the antenna up right. Lifting handset on telephone, dial tone is heard and you can enter a phone number. 4 Connect the DC Power supply. Connect your phone Cord. 1.
Basic Operation Receiving a call Basic Operation Power Off The connected telephone rings when an incoming call is detected. Pick up the handset and begin talking. When you need not to use terminal anymore, you should do power off before removing AC/DC adapter cable. Execute the Power Off Ending a call When you have completed the call, place the handset back on telephone. Also you can hook flash more than about 1 second to end a call and place a new call without hanging up the handset. 1.
System Features Hook flash When the terminal receives a hook-flash from the connected telephone device, it will automatically allow: 1. For producing dial tone again after a phone number has been dialed without connection. 2. The use of special cellular services which may be available in your cellular service area.
System Features Applications Data Communication - LST-255(F) is capable of transmitting and receiving IS-707A FAX or modem communications. For data communications, you will need a standard RS-232C cable or a standard USB cable to connect your PC and FWT terminal. For further information, please contact our authorized service dealer. Multi-extension Installations - For a multi-extension installation, make sure that all the extensions are on-hook.
Programming Storing the Speed Dial Number 1. PressŔ#ŕ+Ŕ#ŕ+Ŕ1ŕcontinuously to enter speed dial programming mode. 2. PressŔ#ŕand one of memory numbers (1~30). 3. PressŔ#ŕand the phone number (Max. 32 digits). 4. PressŔ*ŕto store. Enable or Disable Speed Dial 1. PressŔ#ŕ+Ŕ#ŕ+Ŕ1ŕcontinuously to enter speed dial programming mode. 2. PressŔ#ŕandŔ1ŕorŔ2ŕto enable or disable respectively. Ŕ1ŕ- Speed Dial Enable Ŕ2ŕ- Speed Dial Disable 3. PressŔ*ŕto store. Erase All Speed Dials 1.
Programming Hot Line Programming Alarm While the Hot line function is enabled, the programmed number will be automatically dialed when you pick up the handset and wait for the programmed hot line time (2~10sec) without any key press. Programming the Hot Line number 1. PressŔ#ŕ+Ŕ#ŕ+Ŕ3ŕcontinuously to enter Hot Line programming mode. 2. PressŔ#ŕand Hot Line Enable codeŔ1ŕ. 3. PressŔ#ŕand Hot Line phone number (Max. 32 digits). 4. PressŔ*ŕto save and enable this function. Enable the Hot Line Feature 1.
Programming Programming Changing Outgoing LOCK Code Volume Level There are three voice volume levels to be controlled by software, and you can set the level to the adequate conversation volume. Changing the Volume Level 1. PressŔ#ŕ+Ŕ#ŕ+Ŕ5ŕ continuously to enter Volume Level programming mode. 2. PressŔ#ŕand Volume Level (1~3). Ŕ1ŕ- LOW Level Ŕ2ŕ- MIDDLE Level Ŕ3ŕ- HIGH Level 3. PressŔ*ŕto save. Before pressingŔ*ŕyou can enter volume level continuously. 1.
Programming Enable or Disable DATA mode 1. PressŔ#ŕ+Ŕ#ŕ +Ŕ7ŕcontinuously to enter G3 FAX/DATA programming mode. 2. PressŔ#ŕand Enable Ŕ3ŕ ( ) or Disable Ŕ4ŕ ( ) code. Enable means that Data mode is changed to USB mode. Disable means that Data mode is changed to RS-232C mode. (Default mode) 3. PressŔ*ŕto save. Note 1: How to setup G3 FAX mode more easily 1. PressŔ#ŕ+Ŕ#ŕ+Ŕ7ŕcontinuously to enter G3 FAX/DATA programming mode. 2. Press Enable Ŕ1ŕ ( ) or Disable Ŕ2ŕ ( ) code.
Programming Storing the Permit Dial Number 1. PressŔ#ŕ+Ŕ#ŕ+Ŕ8ŕ+ continuously to enter Restrict Call programming mode. 2. PressŔ#ŕandŔLOCK codeŕ (4 digits : set in Outgoing call lock / default is 0000). 3. PressŔ#ŕandŔ1ŕto enter Permit Dial Number store step. 4. PressŔ#ŕand one ofŔMemory numberŕfor permit dial number(1~10). 5. PressŔ#ŕand theŔdigitsŕ(Max. 32digits). 6. If you want to store more Permit Dial Numbers continue from step 3. If you want to finish at this point, PressŔ*ŕto save.
General Information LST-255(F) ƅ Quick Reference Main Unit Item Description Tx Frequency 824 ~ 849 MHz Rx Frequency 869 ~ 894 MHz Channel Bandwidth 1.25 MHz Frequency Stability Ţ300 Hz Tx Power Max. 0.
LGE CDMA Fixed Wireless Terminal LST-255(F) LIMITED WARRANTY STATEMENT LG ELECTRONICS Inc. represents and warrants that this subscriber unit and its accessories ŔPRODUCTŕ ( ) is free from defects in material and workmanship. This warranty is subject to the following terms and conditions: 1.
Appendix FCC RF Exposure Information WARNING! The antenna used for this transmitter must not exceed 2.5dBi and must be installed to provide a minimum separation distance of 20 cm from all persons. CAUTION Use only the supplied and approved antenna. Use of unauthorized antennas or modifications could impair call quality, damage the phone, void your warranty and/or result in violation of FCC regulations. Do not use the phone with a damaged antenna.
