User's Manual

23
OnStar Hands-Free Calling
How to place a call using a stored nametag:
1. Press the phone button. When OnStar responds with
“OnStar ready,” say “Call.”
2. When OnStar responds with
"Please say the nametag", say the
nametag you wish to dial.
3. OnStar responds with
“Ok, calling <nametag>.”
(Making a call uses up Hands-Free Calling minutes.)
To hear a list of your stored nametags,
use the Directory command
1. Press the phone button. When OnStar responds with
“OnStar ready,” say “Directory.”
2. OnStar will list your nametags.
(This function does not use Hands-Free Calling minutes.)
Common commands
When you push the phone button, OnStar will respond, “OnStar
ready,”
and wait for you to speak a voice command. Try out the
following commands to see how they work:
•“
My Number ”— to hear your vehicle’s phone number.
•“ Dial ”( or “ Dial Number ”)—to dial phone numbers.
•“ Store ”— to store frequently dialed phone numbers.
•“ Call ”( or “ Call Nametag ”)—to dial using stored nametags.
•“ Redial ”— to dial the last phone number you called.
•“ Help ”( or “ OnStar Help ”)— for a list of all commands.
•“
Directory ”— plays all your stored nametags.
•“
Cancel ”— If you spoke a command and the system mis-heard you,
this command takes you from the current function back to the
“OnStar ready” prompt. If the last response from the system was
“OnStar ready,” when you give the“Cancel” command
you will exit Hands-Free Calling.
16312 6.1 text R3.qxd 1/10/06 4:27 PM Page 24