User's Manual

Security Code/locking your system
You can set up a four-digit Personal Security Code to ensure
that unauthorized people do not use the calling capability of
your system. You can turn the security system off or on by
following the instructions below.
1. Press the phone button. When OnStar responds with
“OnStar ready,” say “Security code.”
2. OnStar responds with
“Enter first digit of code, please.”
3. Say your four-digit code, one digit at a time. OnStar will
confirm each digit by repeating it back to you. After the
fourth digit, OnStar will say “Security Code [####] is
now on/off.”
On ce you have turned the Security feature on, any command
you give after an “OnStar Ready” response will return the
message “I’m sorry, I can’t do that while security is on”. Be
sure to remember your security code. You will need to enter it
again to turn Security off. If you forget your code, call OnStar
at 1.888.4.ONSTAR (1.888.466.7827) and we can reset it. If
you have activated the Security feature, other people will not
be able to call you.
The Phone Button
30
16312 6.1 text R3.qxd 1/10/06 4:27 PM Page 31