LG-LX1200 User Guide Ver. 0.11 2002.8.
INDEX Unlocking Your Phone.......................................................................... 4 View of Phone ...................................................................................... 4 Installing and Removing the Battery..................................................... 5 Turning Your Phone On and Off ........................................................... 5 Main Menu ........................................................................................... 6 Power Save Mode....
Erasing Page/Text Messages ............................................................... 16 Sounds ................................................................................................ 17 Adjusting the Volume ......................................................................... 17 Selecting Ring Types for Voice Calls .................................................. 17 Tone Length........................................................................................ 18 Display Menu.......
FCC RF EXPOSURE INFORMATION WARNING! Read this information before using your phone In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
Unlocking Your Phone If you received your Sprint PCS DB-525 in the mail, you may need to unlock it before making calls. 1. Press the END/PWR Switch for 2~3 secs. 2. Highlight Unlock and press OK . 33.. Enter your four-digit lock code. For security purposes, the code will not be visible as you type. Note: If you can’t recall your lock code, try using the last four digits of your Social Security number, the last four digits of your Sprint PCS Phone Number or 0000. View of Phone 1.
Main LCD RF Jack Ear Piece Headset jack Side Key Sub LCD Receptacle Installing and Removing the Battery To install the battery, insert the bottom of the battery into the opening on the back of the phone. Then, push the battery down until the latch clicks. To remove the battery, press down on the latch and remove the battery from the phone. Turning Your Phone On and Off To turn your phone on, move the On/Off Switch (near the antenna) to the ON position.
Main Menu When your phone acquires Sprint PCS Service, the Greeting (a banner of text), the current time and date and the Main Menu are displayed. If you are in a Sprint PCS or authorized analog cellular provider’s service area, you are ready to send and receive calls. Power Save Mode When the phone is in an area without service for 15 minutes, it stops searching for service and enters into the power Save Mode. When your phone activates this feature, Power Save is displayed on your screen.
Entering Characters Using the Keypad(T9) To enter a letter, punctuation or number when creating Phone Book or Scheduler entries, press the corresponding key until the desired character appears. By default, the first letter of a word is capitalized and following letters are lowercase. Characters in the following order: 1 1 .
Display Icons Display icons are the symbols your phone uses to communicate important information. They are as follows: ICON DESCRIPTION Signal Strength (full strength) In Use No Service May result from one of the following : R l Searching for service l no service l maintenance required Roaming (occurs in a non-Sprint PCS area) Antenna The antenna on your Sprint PCS LG-SP3100 provides maximum reception without the inconvenience of extending of retracting it.
Battery Capacity Your Sprint PCS LG-SP3100 Equipped with a Lithium Ion (LiIon) battery. It allows you to recharge your battery before it is fully drained. The battery provides approximately talk time or approximately hours of continuous digital of continuous digital standby time. Note: Long backlight settings affect the battery’s talk and standby times. When the battery reaches 5% of its capacity, the battery icon blinks.
3. When you are finished with your call, highlight and press OK . If the phone is in Active Flip Mode , closing the Flip will also end the call. Roaming With Your Sprint PCS PhoneTM Your Sprint PCS PhoneTM is you can use it to make and receive calls in many places. l In any city where Sprint PCS provides service. l Endimplemented Call On other PCS CDMA networks there Sprint PCS has roaming agreements. When you use your phone outside the Sprint PCS Network, it’s called roaming.
Redialing Last Outgoing Number With Call highlighted, press and hold OK for 2 seconds. Dialing Options (phone book – Not Functioning) When you enter numbers in the Main Menu, dialing options are displayed. To display a Phone Book entry, enter its entry number. To use the 4- Digit Dial option, enter the last four digits of a phone number in your Phone Book. To select an option, highlight it and press OK .(Menu display only, phone book – Not Functioning) l Call – Dials the phone number.
l 4-Digit Dial – Dials the phone number in your Phone Book that ends with the four digits you enter. (See “4-digit Dialing” ) In Call Options During a call, your phone displays menu options in addition to the Main Menu. To select an option, Highlight it and press [OK].( functions ‘Send’ and ‘End’ only) l End Call - Ends the call l Send Tones - Sends the next set of numbers after a Hard Pause. (See “Dialing and Saving Phone Numbers With Pauses “ on the previous page.
l The caller’s name is displayed if the phone number is in your Phone Book The following options are also displayed. To select an option, highlight it and press [OK]. l Answer – answers the call. l Silent Ringer – Mutes the ringer. Note: You can also mute the ringer by pressing the up or down Volume Control key or [CLR]. Answering Calls To answer incoming Sprint PCS calls, open the Flip (in Active Flip Mode) or press [OK].
To set the phone to Vibrate Mode, press the down Volume Control key until Ring Volume Vibrate is displayed. The phone will vibrate and – Vibrate On- is displayed above the Main Menu. To set the phone to Vibrate Mode using the Main Menu, see “Adjusting the Volume” . Getting the Most From Sprint PCS Service New Massage Alerts If it is a voicemail message, the following options are displayed. To select an option, highlight it and press [OK]. l OK – clears the message. (You can also press [CLR].
additional text. ¢ ÑTip! You can view the next or previous message by pressing the Mouse Key left (previous) or right (next) 4. Press [OK] to display message options. To select an option, highlight it and press [OK]. Page Message options: l Erase Message – Deletes the message. l Read – Displays the message again. l Exit – Returns to the Main Menu. Text Message options: l Extract #s – Extracts phone numbers (if there are numbers contained in the text message).(See the following chapter.
Note: If there are no phone numbers to extract from the message, the option does not display. Erasing All Page/Text Messages 1. From the Main Menu, highlight Messages and press [OK]. 2. Highlight Erase Page/Text and press [OK]. 3. Highlight Yes and press [OK]. Page/Text Message Storage Your Sprint PCS LG-SP3100 can store up to 20 page/text messages. When the message memory is 75% full, a warning message prompts you to erase messages to obtain more memory space.
2. Highlight Erase Page/Text and press [OK] 3. Highlight yes and press [OK]. Sounds Adjusting the Volume 1. From the Main Menu, highlight Sounds and press [OK]. 2. Highlight Volume and press [OK]. 3. Highlight Ringer or Key Beep and press [OK]. ¢ ÑTip! You can use the Volume Control keys to adjust the Ring Volume in the Main Menu or the Voice Volume during a call. 4. Highlight High, Medium, Low, Off or Vibrate (for Ringer only) and press [OK].
Note: If you select Roaming, the Ring Type is used for all incoming roaming calls. 5. Highlight a Ring Type and press [OK]. You will hear a preview of the Ring Type when you highlight it. ¢ ÑTip! You can also assign different Ring Types to individual Phone Book entries. (See “Selecting an ID Finger” on page 46.) Selecting Ring Types for Messages To select a Ring Type for Messages: 1. From the Main Menu, highlight Sounds and press [OK]. 2. Highlight Ring Type and press [OK]. 3.
Alert Notification To enable of disable alert sounds: 1. From the Main Menu, highlight Sounds and press [OK]. 2. Highlight Alerts and press [OK]. 3. Select an alert by highlighting it and pressing [OK]. l Services – An alert sounds when you exit or enter PCS CDMA or cellular coverage. l Messages – An alert sounds when you receive a voicemail or page/text message. l Minute Minder – Your phone beeps once a minute when you are on a call. (The beep is not audible to the other party.) 4.
To access the Security menu: 1. From the Min Menu, highlight Security and press [OK]. 2. Enter your lock code. Locking Your Phone When your phone is locked, you can only make calls to 911, Customer Care and Special Numbers or receive incoming calls. To lock your phone: 1. From the Security menu, highlight Lock Phone and press [OK]. 2. Highlight Lock Now or On Power up and press [OK]. If you select On Power Up, the phone will be locked each time it power up. Unlocking Your Phone 1.
Answering Your Phone with the Hands-Free Car Kit You can select different answering options when your phone is connected to the Sprint PCS Hands-Free Car Kit. To answer calls automatically or by pressing any key: 1. From the Main Menu, highlight Setup and press [OK]. 2. Highlight Car Use and press [OK]. To select and option, highlight it and press [OK]. l Any Key Answer - You can answer calls by pressing any key (not including the [CLR] key, Mouse Key or Volume Control keys).
