6.0 User Manual LX150 Ver. 0.1 2006.02.
LIMITED WARRANTY STATEMENT 1. WHAT THIS WARRANTY COVERS: LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be free from defects in material and workmanship, according to the following terms and conditions: (1) The limited warranty for the product extends for ONE (1) year beginning on the data of purchase of the product.
(10) Products used or obtained in a rental program. (11) Consumables (such as fuses). 3. STATE LAW RIGHTS: No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC.
SUBJECT The LX150 phone has been designed to operate on the latest digital mobile communication technology, Code Division Multiple Access (CDMA). This CDMA digital technology has greatly enhanced voice clarity and can provide a variety of advanced features. Currently, CDMA mobile communication technology has been commercially used in Cellular(DCN) and Personal Communication Service (PCS). The difference between them is the operating frequency spectrum. Cellular uses 800MHz and PCS uses 1.9GHz.
Introduction Highlights Congratulations! Your new mobile phone will change your way of communicating and is a compact, lightweight personal communication system with added features for the person on the go. Our advanced digital mobile communication technology allows you to do the followings z Large, easy-to-read, 5-Line, backlight LCD with status icons. z Paging, messaging, voice mail and caller ID. z 23 key keypads z Long battery standby and talk times.
frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. CAUTION Use only the supplied or and approved antenna. Use of unauthorized antennas, modifications could impair call quality, damage the phone or result in violation of FCC regulations.
z Do not exposure to high temperature : 60 (140 ) z Do not incinerate. Caring for Battery Use z Must be recycled or disposed of properly Caution For Adapter (Charger) Use z Using the wrong battery charger could cause damage to your phone and void your warranty may burst causing injury to person and damage. z The charger or adapter is intended for indoor use only. z The charger or adapter is intended for indoor use only.
Contents Limited Warrenty Statement Subjects Introduction Highlights Important Information Check Accessories Safety Instructions Getting Started ............................................................................................... LIMITED WARRANTY STATEMENT ................................................... 2 SUBJECT ..................................................................................................... 4 Introduction ................................................................
Using the AC Adapter .................................................................................... 15 Using Your Phone ...................................................................................... 16 Placing a Call .................................................................................................. 16 Roaming With Your Sprint PCS PhoneTM ..................................................... 16 Calling Experience .................................................................
Getting Started Unlocking Your Phone If you received your Sprint PCS LX150 in the mail, you may need to unlock it before making calls. 1. Press the END/PWR Switch for 2~3 secs. 2. Highlight Unlo c k and press 333... Enter your four-digit lock code. For security purposes, the code will not be visible as you type. Note: If you can’t recall your lock code, try using the last four digits of your Social Security number, the last four digits of your Sprint PCS Phone Number or 0000. View of Phone 1.
Headset Jack Volume Control OK END/PWR CLR Installing and Removing the Battery To install the battery, insert the bottom of the battery into the opening on the back of the phone. Then, push the battery down until the latch clicks. To remove the battery, press down on the latch and remove the battery from the phone.
Turning Your Phone On and Off To turn your phone on, move the On/Off Switch (near the antenna) to the ON position. Your phone performs a short self-test before letting you know it is operational. If your phone does not turn on, make sure the battery is installed correctly and is adequately charged or has external power (via the AC Adapter, Cigarette Lighter Adapter or Hands-Free Car Kit). To turn your phone off, move the On/Off Switch to the OFF position.
As you navigate through a menu, the options are highlighted ( Hig hlig hte d Te st Exa m ple ) . Select an option by highlighting it and pressing . The scroll bar at the right of the menu keeps track of your position in the menu at all times. For example, if you want to view your last incoming call: 1. From the Main Menu, highlight C a ll Histo ry and press . (It may already be highlighted.) 2. Press the Mouse Key down to highlight Inc o m ing C a lls and press .
Display Icons Display icons are the symbols your phone uses to communicate important information.
Signal Strength The quality of each call you make or receive depends on the signal strength on your area. The number of bars in the Signal Strength icon informs you of the current strength. The more bars, the stronger the signal. Battery Capacity Your Sprint PCS LX150 is equipped with a Lithium Ion (LiIon) battery. It allows you to recharge your battery before it is fully drained.
Using Your Phone Placing a Call When the phone is turned on, check the Signal Strength icon to see of you are in a Sprint PCS Service Area or authorized PCS CDMA provider’s service area. 1. Open the Flip. 2. Enter the phone number, highlight C a ll and press ☞Tip! When dialing long distance, it is not necessary to dial a “1” before the area code. 3. When you are finished with your call, press . If the phone is in Active Flip Mode , closing the Flip will also end the call.
If you need customer service for any reason while using your phone outside the Sprint PCS Nationwide Network, just dial 611 from your Sprint PCS Phone. However, because you’re outside the Sprint PCS Network, you may reach the local service provider’s customer service instead of Sprint PCs Customer Care. To be sure that you reach Sprint PCS Customer Care, dial 1-888-211-4PCS. Correcting Dialing Mistakes To delete one digit at a time, press .
☞Tip! To speed dial a Phone Book entry from the Main Menu, press and hold the entry’s number. If the entry number is two digits, enter the first digit, then press and hole the second digit. (This feature will not work when the Roam Confirm option is enabled.) In Call Options During a call, your phone displays menu options in addition to the Main Menu. To select an option, Highlight it and press z Mute or Unmute – Select Mute to mute your phone’s microphone. Select Unmute to reactivate the microphone.
z The LED flashes green z The backlight illuminates z The screen displays an incoming call message z The phone number of the caller is displayed of the phone number is available z The caller’s name is displayed if the phone number is in your Phone Book Note: You can also mute the ringer by pressing the up or down Volume Control key or [Back].
Setting the Ring Volume to Vibrate To set the phone to Vibrate Mode, press the down Volume Control key until Ring Volume Vibrate is displayed. The phone will vibrate and – Vibrate On- is displayed above the Main Menu. To set the phone to Vibrate Mode using the Main Menu, see “Adjusting the Volume” . Getting the Most From Sprint PCS Service New Massage Alerts If it is a voicemail message, the following options are displayed. To select an option, highlight it and [Call] soft 1 key or [TALK].
☞Tip! You can also access page/text messages from the Main Menu by pressing the Mouse Key Down 3. Highlight the message you want to display and press [OK]. Press the Mouse Key down to display additional text. ☞Tip! You can view the next or previous message by pressing the Mouse Key left (previous) or right (next) 4. Press [OK] to display message options. To select an option, highlight it and press [OK]. Page/Text Message options: z Call – Dials the phone number of the sender (if applicable).
Page/Text Message Storage Your Sprint PCS LX150 can store up to 50 page/text messages. When the message memory is 80% full, a warning message prompts you to erase messages to obtain more memory space. Roaming on to Other Service Providers Roaming occurs when you are in an area serviced by another authorized service provider. When this situation occurs, the R icon and Digital Roam or Analog Roam are displayed. If there is no service available, the icon is displayed.
Note: When the phone is in Vibrate Mode and attached to and accessory (Desktop Charger, HandsFree Car Kit, etc.), it uses the Standard Ring Type to alert you of incoming calls, alarms or messages. Selecting Ring Types for Voice Calls and Messages To Select a Ring Type for Voice Calls: 1. From the Main Menu, highlight Settings and press [OK]. 2. Highlight Sounds and press [OK]. 3. Highlight Ringers and press [OK]. 4. Highlight Caller ID, No Caller ID or Roaming and press [OK].
Key Tones Key Tones lengths may be better for tone recognition when dialing voicemail or other automated systems. To select a Key Tones: 1. From the Main Menu, highlight Settings and press [OK]. 2. Highlight Sounds and press [OK]. 3. Highlight Key Tones and press [OK]. 4. Highlight Short Tones of Long Tones and press [OK]. Alerts To enable of disable alert sounds: 1. From the Main Menu, highlight Settings and press [OK]. 2. Highlight Sounds and press [OK]. 3. Highlight Alerts and press [OK]. 4.
z Signal Fade – The sound when a signal becomes weak. 5. Highlight ON or Off and press [OK]. Display For information on changing Backlight, Greeting or Contrast settings, see Handy Tips. Display Menu Security Accessing the Security Menu You must enter your lock code to view the Security menu. If you forget your lock code, try using the last four digits of your Social Security number, the last four digits of your Sprint PCS Phone Number or 0000. Security Menu To access the Security menu: 1.
2. Highlight Lock Now or On Power up and press [OK]. If you select On Power Up, the phone will be locked each time it power up. Unlocking Your Phone 1. Highlight Unlock and press [OK]. 2. Enter your lock code. Changing the Lock Code To change your lock code: 1. From the Security menu, highlight Change Lock and press [OK]. 2. Enter your new lock code. 3. Reenter your new lock code.
Safety Guideline Provided herein is the TIA Safety Information for Wireless Handheld phones. Inclusion of this text in the terminal unit’s owner’s manual is required for CTIA Certification. TIA Safety Information Provided herein is the complete TIA Safety Information for Wireless Handheld phones. Inclusion of the text covering Pacemakers, Hearing Aids, and Other Medical Devices is required in the owner’s manual for CTIA Certification. Use of the remaining TIA language is encouraged when appropriate.
Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations. PHONE OPERATION NORMAL POSITION: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder. TIPS ON EFFICIENT OPERATION: • For your phone to operate most efficiently: • Extend your antenna fully. Do not touch the antenna unnecessarily when the phone is in use.
• Should not carry the phone in a breast pocket; • Should use the ear opposite the pacemaker to minimize the potential for interference . • If you have any reason to suspect that interference is taking place, turn your phone OFF immediately Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider [or call the customer service line to discuss alternatives.] Optional for each phone manufacturer.
Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always marked clearly.
FDA Consumer Update The U.S. Food and Drug Administration’s Center for Devices and Radiological Health Consumer Update on Mobile Phones 1. Do wireless phones pose a health hazard? The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used.
• Support needed research into possible biological effects of RF of the type emitted by wireless phones; • Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and • Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.
3. What kinds of phones are the subject of this update? The term “wireless phone” refers here to hand-held wireless phones with built-in antennas, often called “cell,” “mobile,” or “PCS” phones. These types of wireless phones can expose the user to measurable radiofrequency energy (RF) because of the short distance between the phone and the user’s head.
meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phone RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years. 5.
detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues. FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations.
8. What has FDA done to measure the radiofrequency energy coming from wireless phones ? The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical standard for measuring the radiofrequency energy (RF) exposure from wireless phones and other wireless handsets with the participation and leadership of FDA scientists and engineers.
Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use. 10. What about children using wireless phones? The scientific evidence does not show a danger to users of wireless phones, including children and teenagers.
FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that that no interference occurs when a person uses a “compatible” phone and a “compatible” hearing aid at the same time. This standard was approved by the IEEE in 2000.
Consumer Information on SAR (Specific Absorption Rate) THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications ‘Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
Additional information os Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com. ___________________________________________________________________________________ * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue.
