6.0 User Manual LX5400 Ver. 0.1 2003.05.
LIMITED WARRANTY STATEMENT 1. WHAT THIS WARRANTY COVERS: LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be free from defects in material and workmanship, according to the following terms and conditions: (1) The limited warranty for the product extends for ONE (1) year beginning on the data of purchase of the product.
(10) Products used or obtained in a rental program. (11) Consumables (such as fuses). 3. STATE LAW RIGHTS: No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC.
SUBJECT The LX5400 phone has been designed to operate on the latest digital mobile communication technology, Code Division Multiple Access (CDMA). This CDMA digital technology has greatly enhanced voice clarity and can provide a variety of advanced features. Currently, CDMA mobile communication technology has been commercially used in Cellular(DCN) and Personal Communication Service (PCS). The difference between them is the operating frequency spectrum. Cellular uses 800MHz and PCS uses 1.9GHz.
Introduction Highlights Congratulations! Your new mobile phone will change your way of communicating and is a compact, lightweight personal communication system with added features for the person on the go. Our advanced digital mobile communication technology allows you to do the followings ?? Large, easy-to-read, 8-Line, backlight LCD with status icons. ?? Paging, messaging, voice mail and caller ID. ?? 22 key keypads ?? Long battery standby and talk times.
frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. CAUTION Use only the supplied or and approved antenna. Use of unauthorized antennas, modifications could impair call quality, damage the phone or result in violation of FCC regulations.
?? Do not exposure to high temperature : 60 (140 ) ?? Do not incinerate. Caring for Battery Use ?? Must be recycled or disposed of properly Caution For Adapter (Charger) Use ?? Using the wrong battery charger could cause damage to your phone and void your warranty may burst causing injury to person and damage. ?? The charger or adapter is intended for indoor use only. ?? The charger or adapter is intended for indoor use only.
Contents Limited Warrenty Statement Subjects Introduction Highlights Important Information Check Accessories Safety Instructions Getting Started ........................................................................................................... Unlocking Your Phone .......................................................................................... View of Phone..........................................................................................................
Page/Text Message Storage ................................................................................ Roaming on to Other Service Providers .......................................................... (Call History- not functioning)............................................................................. Page/Text Messages.............................................................................................. Erasing Page/Text Messages ...........................................................
Getting Started Unlocking Your Phone If you received your Sprint PCS LX5400 in the mail, you may need to unlock it before making calls. 1. Press the END/PWR Switch for 2~3 secs. 2. Highlight Unlock and press. 33.. Enter your four-digit lock code. For security purposes, the code will not be visible as you type. Note: If you can’t recall your lock code, try using the last four digits of your Social Security number, the last four digits of your Sprint PCS Phone Number or 0000. View of Phone 1.
9. Folder : Lets you answer or end calls. SPEAKER Folder OK Volume Control Mouse END/PWR BACK Headset Jack RECEPTACLE Installing and Removing the Battery To install the battery, insert the bottom of the battery into the opening on the back of the phone. Then, push the battery down until the latch clicks. To remove the battery, press down on the latch and remove the battery from the phone.
has external power (via the AC Adapter, Cigarette Lighter Adapter or Hands-Free Car Kit). To turn your phone off, move the On/Off Switch to the OFF position. Main Menu In Standby mode, press left soft key [Menu] to display main menu. There 8 main menus. Power Save Mode When the phone is in an area without service for 15 minutes, it stops searching for service and enters into the power Save Mode. When your phone activates this feature, Power Save is displayed on your screen.
Entering Characters Using the Keypad(T9) To enter a letter, punctuation or number when creating Phone Book or Scheduler entries, press the corresponding key until the desired character appears. By default, the first letter of a word is capitalized and following letters are lowercase.
Display Icons Display icons are the symbols your phone uses to communicate important information.
bars in the Signal Strength icon informs you of the current strength. The more bars, the stronger the signal. Battery Capacity Your Sprint PCS LX5400 is equipped with a Lithium Ion (LiIon) battery. It allows you to recharge your battery before it is fully drained. The battery provides approximately 150 minuets of continuous digital talk time or approximately 150 hours of continuous digital standby time. Note: Long backlight settings affect the battery’s talk and standby times.
3. Press [TALK]. 4. When you’re finished, press [END]. Answering Calls 1. Make sure your phone is on. If your phone is off, incoming calls go to voicemail. 2. When your phone rings or vibrates, answer the call by pressing [TALK]. There are several ways to answer an incoming call. - Press [TALK] - Press any key - Open 3. To end the call, close the phone or press [END]. Call Waiting Your phone beeps when another call is coming in. To answer this call: 1.
?? On other PCS CDMA networks there Sprint PCS has implemented roaming agreements. When you use your phone outside the Sprint PCS Network, it ’s called roaming. If you’re roaming in areas where agreements are in place with PCS CDMA providers, you will pay the roaming rate plus longdistance charges, where they apply. (See “Display Icons” on page 7 for network indication icons.) Always dial using 10 digits (area code + number) when calling from outside your Sprint PCS Home Service Area.
To select an option, highlight it and press .(Menu display only, phone book – Not Functioning) ?? Call – Dials the phone number. ?? Roam Confirm – Reminds you that you are making a call on an. (See “Disabling Roam Confirm” ) ?? Roam Call – Dials the phone number using the current PCS CDMA or analog cellular network. ?? Save – Saves the phone number in your Phone Book. (See “Saving a Phone Number” on the following page.
?? End Call - Ends the call ?? Send Tones - Sends the next set of numbers after a Hard Pause. (See “Dialing and Saving Phone Numbers With Pauses “ on the previous page.) ?? Mute or Unmute – Select Mute to mute your phone’s microphone. Select Unmute to reactivate the microphone. ?? Dial 3-Way Call – Let’s you dial another phone number. ?? Flash – Answers an incoming Call Waiting call or connects the third party for Three-Way Calling.
Answering Calls To answer incoming Sprint PCS calls, open the Flip (in Active Flip Mode) or press [TALK]. Note: If you open the Flip (in Active Flip Mode) and then press [TALK], you will hang up on the caller. To answer incoming roam calls, press [TALK]. Displaying Yo ur Sprint PCS Phone Number(phone book – not functioning) To display your phone number: 1.
If it is a voicemail message, the following options are displayed. To select an option, highlight it and press [TALK]. If it is a page/test message, the following options are displayed. To select an option, highlight it and press [TALK]. ?? Read – Displays the message. ?? Exit – Returns to the Main Menu. (You can also press [BACK].) Note: If you are out of Sprint PCS Service Area coverage, you are not notified of new messages. You will be notified when you reenter a Sprint PCS Service Area.
?? Read – Displays the message again. ?? Exit – Returns to the Main Menu. Text Message options: ?? Extract #s – Extracts phone numbers (if there are numbers contained in the text message).(See the following chapter.) ?? Erase Message – Deletes the message. ?? Read – Displays the message again. ?? Exit – Returns to the Main Menu. Extracting Phone Numbers From Text Messages To extract a phone number from a text message: 1. While displaying a text message, press [OK] to view the Text Message options.
a warning message prompts you to erase messages to obtain more memory space. Roaming on to Other Service Providers Roaming occurs when you are in an area serviced by another authorized service provider. When this situation occurs, the R icon and Digital Roam of Analog Roam are displayed. If there is no service available, the ☎ i con i s di spl ayed. (Call History- not functioning) Page/Text Messages For information on page/text messages, see “Retrieving Page/Text Messages” .
2. Highlight Volume and press [OK]. 3. Highlight Ringer or Key Beep and press [OK]. ☞ Tip! You can use the Volume Control keys to adjust the Ring Volume in the Main Menu or the Voice Volume during a call. 4. Highlight High, Medium, Low, Off or Vibrate (for Ringer only) and press [OK]. Note: When the phone is in Vibrate Mode and attached to and accessory (Desktop Charger, HandsFree Car Kit, etc.), it uses the Standard Ring Type to alert you of incoming calls, alarms or messages.
1. From the Main Menu, highlight Sounds and press [OK]. 2. Highlight Ring Type and press [OK]. 3. Highlight Messages and press [OK]. 4. Highlight Voicemail, Page/Text of MiniBrowser and press [OK]. 5. Highlight a Ring Type and press [OK]. You will hear a preview of the Ring Type when you highlight it. Tone Length Longer tone lengths may be better for tone recognition when dialing voicemail or other automated systems. To select a tone length: 1.
?? Messages – An alert sounds when you receive a voicemail or page/text message. ?? Minute Minder – Your phone beeps once a minute when you are on a call. (The beep is not audible to the other party.) 4. Highlight ON or Off and press [OK]. Display For information on changing Backlight, Greeting or Contrast settings, see Handy Tips . Display Menu Security Accessing the Security Menu You must enter your lock code to view the Security menu.
1. From the Security menu, highlight Lock Phone and press [OK]. 2. Highlight Lock Now or On Power up and press [OK]. If you select On Power Up, the phone will be locked each time it power up. Unlocking Your Phone 1. Highlight Unlock and press [OK]. 2. Enter your lock code. Changing the Lock Code To change your lock code: 1. From the Security menu, highlight Change Lock and press [OK]. 2. Enter your new lock code. 3. Reenter your new lock code.
?? Any Key Answer - You can answer calls by pressing any key (not including the [BACK] key, Mouse Key or Volume Control keys). ?? Auto Answer - Your phone answers incoming calls automatically after five seconds. 3. Highlight On and press [OK]. To disable an option, follow steps 1 and 2 and select Off. Safety Guideline Provided herein is the TIA Safety Information for Wireless Handheld phones. Inclusion of this text in the terminal unit’s owner’s manual is required for CTIA Certification.
Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI Standard (C95.1). The design of your phone complies with the FCC guidelines (and those standards). ANTENNA CARE Use only the supplied or an approved replacement antenna.
Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of six (6”) inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.
AIRCRAFT FCC regulations prohibit using your phone while in the air. Switch OFF your phone before boarding an aircraft. BLASTING AREAS To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areas posted: “Turn off two-way radio”. Obey all signs and instructions. POTENTIALLY EXPLOSIVE ATMOSPHERES Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions.
FDA Consumer Update The U.S. Food and Drug Administration’ s Center for Devices and Radiological Health Consumer Update on Mobile Phones 1. Do wireless phones pose a health hazard? The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used.
?? Support needed research into possible biological effects of RF of the type emitted by wireless phones; ?? Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and ?? Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.
3. What kinds of phones are the subject of this update? The term “wireless phone” refers here to hand-held wireless phones with built-in antennas, often called “cell,” “mobile,” or “PCS” phones. These types of wireless phones can expose the user to measurable radiofrequency energy (RF) because of the short distance between the phone and the user’ s head.
meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phone RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years. 5.
detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues. FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations.
8. What has FDA done to measure the radiofrequency energy coming from wireless phones ? The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical standard for measuring the radiofrequency energy (RF) exposure from wireless phones and other wireless handsets with the participation and leadership of FDA scientists and engineers.
Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use. 10. What about children using wireless phones? The scientific evidence does not show a danger to users of wireless phones, including children and teenagers.
FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that that no interference occurs when a person uses a “compatible” phone and a “compatible” hearing aid at the same time. This standard was approved by the IEEE in 2000.
Consumer Information on SAR (Specific Absorption Rate) THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications ‘Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
Additional information os Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com. ___________________________________________________________________________________ * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue.
