User's Manual

20 Plasma Display
Operation
Auto
Auto
Adjustment
Adjustment
- RGB (PC) mode only; This function doesn’t work in RGB-DTV.
- Automatically adjusts picture position and minimizes image shaking.
- If the image is still not correct, your Monitor is functioning properly but needs further adjustment.
- The AUTO CONFIG. and the MANUAL CONFIG can be adjust automatically for DVI mode.
1. Press the MENU button and then use
D / E
button to select the SCREEN menu.
2. Press the
G button and then use
D / E
button to select Auto config..
3. Press the
G button to run Auto configure.
• When Auto config. has finished, OK will be shown on screen.
• If the position of the image is still not correct, try Auto adjustment again.
4. If picture needs to be adjusted more after Auto adjustment in RGB mode, you can
adjust the Manual config..
VIDEO
AUDIO
TIME
SCREEN
TWIN
SPECIAL
Auto config. G
ARC
Zoom in/out
Position
Manual config.
Screen adj.
Reset
XGA mode
To set
MENU
Prev.
Screen Menu Options
Screen Menu Options
Setting Picture Format
Setting Picture Format
- If a 4:3 fixed image is on the screen for a long time, it may remain visible.
1. Use the ARC button repeatedly to select the desired picture format. You can also select picture format 4:3, 16:9,
Panorama or ZOOM in the SCREEN menu.
• 4:3
- Choose when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the
left and right sides.
• 16:9 (Wide)
- Choose when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen. (Useful
for viewing 4:3 formatted DVDs.)
• Panorama
- Choose when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both sides, to
create a spectacular view.
- RGB, DVI or Component (DTV) sources can’t use the Panorama feature.
• ZOOM
- Choose when you want to view the picture without any alteration. However, the top and bottom portions of the
picture will be cropped.
- RGB, DVI or Component (DTV) sources can’t use the Zoom feature.
1. Use ZOOM+/ZOOM- button to enlarge or reduce the picture size.
• The adjustment range of Zoom is 100~300.
2. Adjust the main picture position with the
D / E
/ F / G buttons in enlarged picture mode.
Picture Size Zoom
Picture Size Zoom
When enlarging or reducing the picture, the image may become distorted.
Zoom out
100%
D
F
G
E