6-4. Restore the Default Settings If you have changed the system setup by mistake, you can restore the default settings. 1. After opening the system setup screen, use the arrow keys to move to Exit. 2. Use the arrow keys to select Load Optimal Defaults, and press [Enter]. 3. When the following message appears, select [Yes] and press [Enter]. The settings will be reset to their original defaults. 4. To save the changes in system setup, press [F10]. 5.
Chapter7.
7-1. LG Smart Recovery System Backup LG Smart Recovery helps you safely install and recover Windows 7. ※ The figures herein may differ by language selection and be subject to change without prior notice. 1. Double-click the LG Smart Recovery icon to run LG Smart Recovery. 2. Click the System Backup icon. 3. When the following screen appears, select the location to back up.
complete backup data. 5. Specify the location to save the backup file, type file name and click Save button. ※ If you have selected Incremental Backup, choose the existing Full backup data and click Open. 6. Once you complete the process to set the Full Backup location, click Next. 7. Check the system backup preferences you have selected and click OK button.
※ Quick Backup reduces time required to backup the system. 8. The screen showing the progress of system backup appears. ※ Depending on product specifications and backup file size, the system may need longer time to load the file. Do not turn off the power forcibly or reboots the system while it is loading the file. 9. After the system backup is complete, click OK to finish the process.
7-2. LG Smart Recovery System Restoration You can restore the system by using the LG Smart Recovery backup data. ※ The figures and instructions herein are subject to change without prior notice. 1. Double-click the LG Smart Recovery icon to run LG Smart Recovery. ※ When Windows 7 does not operate normally, restart the computer. When "PRESS F11 TO RUN LG RECOVERY.." appears on the screen during the booting process, press F11 to start LG Smart Recovery.
3. The System Restore Settings screen will appear. 4. Click the Protected Hard Disk Area or Browse to select a file you want to back up and click Next. ※ The Protected Hard Disk Area option will be presented only if you have selected the Safe Backup when you run the LG Smart Recovery for the first time. ※ If you select the Protected Hard Disk Area, the system will be restored to the initial status when you have bought it.
5. Confirm the restoration settings and click OK. The Restoration In Process message will appear. 6. Click OK. The system will automatically restart in 1 minute and show the System Backup In Process screen. ※ Depending on product specifications and backup file size, the system may need longer time to load the file. Do not turn off the power forcibly or reboots the system while it is loading the file.
7. Once the system restoration process completes, click OK and the system will automatically restart in 10 seconds.
7-3. LG Smart Recovery Tools Menu LG Smart Recovery Tools menu provide useful tools to back up and restore the system efficiently. ※ The figures and instructions herein are subject to change without prior notice. 1. Disk Management: By using the Disk Management tool, you can perform disk-related tasks including creating partition and volume, formatting, and assigning drive letter. 2. Explorer: This tool shows drive disks and other hardware connected to the computer.
96 Using LG Smart Recovery
Chapter8.
8-1. LG Smart Recovery Center ※ LG Smart Recovery Center DVD may not be available depending on the model. When LG Smart Recovery fails to restore the system, you can reinstall Windows 7 by using the LG Smart Recovery Center. 1. Insert the LG Smart Recovery Center DVD into the DVD-ROM and restart the system. ※ If the LG Smart Recovery Center DVD fails to boot the system, restart the computer and press F2 to start the BIOS SETUP and change the Booting Order option. 2.
5. When prompted to confirm to start the System Restoration, click OK. 6. When it completes the restoration process, the system will present the Completed the Restoration message. 7. Click OK to restart the system automatically after 10 seconds. ※ Remove the LG Smart Recovery Center DVD from the DVD-ROM once the System Restoration process completes.
100 Using LG Smart Recovery Center
Chapter9.
9-1. Reinstalling the Driver ※ The figures herein may differ by language selection and be subject to change without prior notice. ▶ Reinstalling the Driver Using LG Intelligent Update 1. Select Start > All Programs > LG Software > LG Intelligent Update to continue. ※ You can also double-click the LG Intelligent Update icon to run the program. 2. Select [Automatic Installation] or [Manual Installation] to reinstall the driver. ※ For more details, refer to Help. 1.
▶ Installing LG Intelligent Update ※ LG Intelligent Update comes preinstalled in your system. You can also download the application from the Internet. 1. Go to "www.lge.com", download LG Intelligent Update and install the program. 2. When the installation screen appears, click Next > Next > Finish or press Enter to install the program. 3. LG Intelligent Update screen appears.
104 Reinstalling the Driver
Chapter10.
10-1. Using the Internet There are various methods to access the Internet. Choose the most desirable method for user environments and system specifications. ※ Items displayed during the process may differ by model type and spec. ▶ Using LAN LAN refers to high speed network environments linking companies and households. 1. Connect LAN cable to the LAN port. 2. Select Start > Control Panel > View by > Small icons > Network and Sharing Center.
3. Click Change Adapter Settings. 4. Right-click Local Area Connections and select Properties.
5. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties. 6. On the General tab, select Obtain an IP address automatically.
7. Click the OK button when the Internet Protocol (TCP/IP) properties are set. ▶ Using Wireless LAN ※ The Wireless LAN card is optional, and so it may not be installed in some models. Wireless LAN supports multi-terminal networking at home and office. Wireless network offers general network features (e.g. sharing files, folders, and a printer) and allows a computer without the Internet connection in a small network to access the Internet through another terminal.
the button to search for the wireless network again. 2. Select the Access Point (wireless network) you want to use and click [Connect] to connect to the Access Point.
※ If a password is set for the wireless network, the Enter Password window appears. 3. Click the button to see if the Access Point is connected to the network. ■ Ensure the network is secured to share the computer and be careful not to share confidential data.
112 Using the Internet
Chapter11.
ory 114 Secondary Storage Device and Memory
11-1. Using the Memory Card ▶ Checking Available Memory Card ※ This model supports SD, MMC, Memory Stick, and Memory Stick Pro. SD, MMC, Memory Stick, Memory Stick Pro cards are mobile storage devices like a floppy disk, widely used in many digital products these days. To use Memory Stick Duo, Memory Stick Pro Duo, mini SD, micro SD and MMC mobile cards, mount it on the dedicated adapter and insert the adapter into the multi-card slot.
■ When the memory card is formatted, the data stored in the memory card will be deleted. Check whether there are important data before formatting the memory stick. ■ To format a memory card, right-click the memory card drive and select Format. When Format window appears, click Start to continue. ■ The format feature may not be available on those Windows whose version is lower than Windows Vista. Format the card on other digital devices or format it after installing Memory Stick Formatter.
To safely removing a memory card: 1. Click Safely Remove Hardware icon on the taskbar. 2. Click Safely Remove Hardware (S). 3. When Safety Remove Hardware window appears, click Stop. 4. When Stop Hardware window appears, click OK.
11-2. Expanding Memory Capacity You may need to expand the notebook memory for better performance. ※ For memory expansion, we recommend that you receive a paid service from a service center certified by LG. LG disclaims any responsibility for damage resulting from uncertified service or arbitrary disassembly. ▶ About Memory This system uses a 200-pin, SO-DIMM (Small Outline Dual In-Line Memory Module)-type DDR2 SDRAM. ※ The models that have two 1 GB(1024 MB) memories cannot be upgraded later.
▶ Expanding Memory Capacity ※ Main board configuration, memory socket and memory type may differ by model. 1. Loosen the two screws at the bottom of the notebook PC to remove the cover. 2. Insert the expansion memory to the memory socket as indicated by the arrow.
3. Push the memory in the direction of the arrow until you hear a "click" sound. 4. After inserting the memory, fasten the cover with the screws. 5. If an error message related to the main memory capacity is displayed during booting after the memory is expanded, press F2 key and save the settings. ■ Before remove the PC cover, turn off the AC power, and remove the battery and all peripherals. Then, disconnect the cable. ■ Push till the memory is completely fixed in the lock.
■ Use only the expandable main memory module manufactured by LG. Using a main memory module other than recommended products may cause malfunctioning of the notebook PC.
122 Secondary Storage Device and Memory
Chapter12.
12-1. Specifications ▶ Available Processors Intel Atom Processor (L2 Cache Size: 512 KB) is supported. ※ The user must not replace or expand the CPU capacity arbitrarily. The CPU capacity differs depends on model type. ▶ Main Memory One 1 GB(1024 MB) memory or two 1 GB(1024 MB) memories are provided as main memory. The notebook PC has two memory slots. ※ The models that have two 1 GB(1024 MB) memories cannot be upgraded later. ※ Memory types and specifications may differ depending on the model.
▶ External I/O Interface External VGA Monitor Port: 1 Microphone: 1 Microphone Input Port: 1 Headset Output Port: 1 USB 2.0 Ports: 3 Multi-card Slot: 1 RJ 45 (LAN) Port: 1 (Gender) ▶ Video Mobile Intel Graphic Media Accelerator 3150 (Dynamic Video Memory Technology) ※ The DVMT actively utilizes part of the system memory when processing large graphic data like 3D graphics.
※ Wireless LAN specifications may differ by model type and cannot be arbitrarily changed by the user. ※ Manufacturers and installers cannot provide services related to human safety as this wireless device may cause radio interference. ▶ Weight Full Installation: About 1.3 kg (including 6-cell battery) / 1.45 kg (including 9-cell battery) Battery: About 320 g (6 cells) / 460 g (9 cells) ※ Weight descriptions may differ by model type.
12-2. Power Supply and Environments ▶ AC Adapter (Free Voltage) Power Capacity: 40 W ※ Input: AC 100 to 240 V, 1.2 A, 50 / 60 Hz ※ Output: DC 20 V, 2 A ※ Caution: Use a rated and legitimate AC adapter, suitable for the model. ▶ Battery (Li-Ion) Rated Capacity: 11.1 V or 10.8 V ※ Charging Hours: At room temperature (0 ※ Not charged under 0 to 40 ) and power turned off - less than 3 hours (6-cell battery) .
