Order Number : GETEC-C1-12-393 FCC Part 15 subpart B Test Report Number : GETEC-E3-12-149 Page 1 / 1 APPENDIX G : USER’S MANUAL EUT Type: DLP PROJECTOR FCC ID.
Owner's Manual DLP PROJECTOR Please read this manual carefully before operating your projector and retain it for future reference. PB63U www.lg.
2 LICENSES LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. . This is an official DivX Certified® device that plays DivX video. Visit divx. com for more information and software tools to convert your files into DivX video.
SAFETY INSTRUCTIONS 3 SAFETY INSTRUCTIONS Please take note of the safety instructions to prevent any potential accident or misuse of the projector. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
4 SAFETY INSTRUCTIONS y Do not use the projector in a damp place such as a bathroom where it is likely to get wet. - This may cause a fire or an electric shock. y Do not allow a tablecloth or curtain to block the vents. - This may cause the internal temperature of the projector to rise and cause a fire. y The distance between the projector and the wall should be more than 30 cm for ventilation purposes. - Otherwise, this may cause the internal temperature of the projector to rise and cause a fire.
SAFETY INSTRUCTIONS CAUTION y Hold the plug firmly when unplugging. - A broken wire in the cord may cause a fire. y Ensure the power cord or plug is not damaged, modified, severely bent, twisted, pulled, sandwiched or heated. Do not use a loose wall outlet. - This may cause a fire or an electric shock. y Keep the power cord away from any heating devices. - The cord coating may melt and cause an electric shock.
6 SAFETY INSTRUCTIONS when the projector is in use. The strong light may damage your eyes. y When the lamp is on or has just been turned off, avoid touching the air vent or lamp because these will be very hot. y If there is a gas leak, do not touch the wall outlet. Open the window for ventilation. - A spark may cause a fire or burn. y Never touch the projector or power cord during thunder or lightning. - This may cause an electric shock.
SAFETY INSTRUCTIONS Cleaning WARNING y Do not spray the projector with water when cleaning. Do not allow water to go into the projector or do not allow it to get wet. - This may cause a fire or an electric shock. y When there is smoke or a strange smell coming out from the projector or a foreign object falls into the projector, please switch it off and unplug it from the power outlet and contact an LG Electronics Service Center. - If not, this may cause a fire or an electric shock.
8 SAFETY INSTRUCTIONS OTHERS WARNING y Only a qualified technician can disassemble or modify the projector. For inspection, adjustment, or repair, contact your seller or the Service Center. - Otherwise, this may cause a fire or an electric shock. y Dispose of the used battery properly. - Otherwise, this may result in explosion or fire. y The correct method of disposal may vary depending on your country or region. Dispose of the battery pack according to the appropriate instructions.
SAFETY INSTRUCTIONS FCC NOTICE ANTENNA Outdoor Antenna Grounding y If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
10 SAFETY INSTRUCTIONS Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream through designated collection facilities appointed by your government or your local authorities. 3.
Contents 11 Contents LICENSES 2 SAFETY INSTRUCTIONS 3 PREPARATION 13 Accessories 13 Optional Extras 14 Parts and Components 15 Installation 16 - Installation Precautions 16 - Projection Distance per Screen Size 17 - How to Install the Projector Using a Tripod 18 - Kensington Security System 18 REMOTE CONTROL ENTERTAINMENT 28 MY MEDIA 28 - Connecting USB Storage Devices 28 - MOVIE LIST 30 - PHOTO LIST 36 - MUSIC LIST 38 - FILE LIST 40 3D FUNCTION 42 Before Watching 3D 42 - While Watching 3D 42
12 Contents MAINTENANCE 63 Cleaning the Projector - Cleaning the Lens - Cleaning the Projector Case 63 63 63 SPECIFICATIONS 64
PREPARATION PREPARATION Accessories Check enclosed accessories. The picture may be different from an actual product. 219'4 +0276 /76' %* 81. +0(1 $.#01- /#4- ꕣ (#8 5'66+0)5 3 /'07 1 2 4 5 7 8 .+56 3 6 9 (.#5*$- 0 & .
14 PREPARATION Optional Extras To purchase optional extras, visit an electronics store or online shopping site or contact the retail store where you purchased the product. Without prior notice, optional extras are subject to change in order to improve the performance of the product, and new accessories may be added.
PREPARATION 15 Parts and Components * The projector is manufactured using high-precision technology. You may, however, see tiny black dots and/or bright colored dots (red, blue or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction. When powered on, the LED of the control panel turns on.
16 PREPARATION Installation Installation Precautions y Place the projector in a well-ventilated environment. - To prevent internal heat from building up, install the projector in a wellventilated place. Do not place anything near the projector as this may block its air vents. If the air vents are blocked, the internal temperature will increase. - Do not place the projector on a carpet or rug.
PREPARATION 17 Projection Distance per Screen Size 1 Place the projector on a sturdy, level surface, together with the PC or audio/video source. 2 Place the projector at an appropriate distance from the screen. The distance between the projector and the screen determines the actual size of the image. 3 Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the image on the screen will be tilted and the image quality will be poor.
18 PREPARATION How to Install the Projector Using a Tripod y You can install this projector using a camera tripod. As shown below, you can mount the projector instead of a camera on the tripod. y When stabilizing the tripod, we recommend using the locking bolt of standard size 4.5 mm or less. The maximum size allowed for the locking bolt is 5.5 mm. (If it is longer than the maximum allowed size, it may damage the projector.
REMOTE CONTROL 19 REMOTE CONTROL Open the battery cover on the back of the remote control and insert the specified batteries as per instructions . The same type of batteries must be used. 219'4 +0276 /76' ① ② POWER Turns the projector on or off. INPUT Changes the input source. MUTE Mutes all sounds. VOL +, Adjusts the volume level. CH , Changes the channel or page.. %* 81. +0(1 $.#01- /#4- ꕣ (#8 5'66+0)5 3 /'07 1 2 3 4 5 6 7 8 .+56 9 (.#5*$- 0 & .
20 REMOTE CONTROL 219'4 +0276 /76' %* 81. +0(1 $.#01- /#4- ꕣ (#8 5'66+0)5 3 /'07 1 2 3 4 5 6 7 8 .+56 Alphanumeric buttons Enters letters and numbers. Playback Control Buttons Controls playback of USB mode. LIST Accesses the saved channel list. - (Dash) Inserts a dash between numbers such as 2 - 1 and 2 - 2. FLASHBK Tunes to the last channel viewed. 3D Shows 3D images. L/R Switches left and right in 3D mode. Color buttons Access special functions in some menus. 9 (.#5*$- 0 & .
Using the PROJECTOR Using the PROJECTOR Connecting to an Antenna or Cable Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional. Connecting a Cable Box Connect the projector to a cable box and the cable box to a wall antenna socket with 2 RF cables (75 Ω). Connecting an Antenna or Basic Cable Connect the projector to a wall antenna socket with an RF cable (75 Ω).
22 Using the PROJECTOR Watching Projector Watching Projector 1 Turning on the Projector 1 Connect the power cord correctly. 2 After waiting for a moment, press the POWER button on the remote control or the control panel. (The light on the control panel will be turned on.) 3 In the Language Selection screen, In Standby mode, press the POWER button to turn the projector on. 2 Press the INPUT button and select the input signal you want.
Using the PROJECTOR Managing Channels Setting Up Channels Storing Channels To store channels automatically, 1 Press MENU to access the menu. 2 Press the Navigation buttons to scroll to CHANNEL and press OK. 3 Press the Navigation buttons to scroll to Auto Tuning and press OK. 4 Select Start to start automatic tuning. The projector scans and saves available channels automatically. 5 When you are finished, press SETTINGS. To store channels manually, 1 Press MENU to access the menu.
Using the PROJECTOR 24 Editing Your Channel List Favorite Channel Setup 1 Press MENU to access the menu. 2 Press the Navigation buttons to scroll 1 to CHANNEL and press OK. 3 Press the Navigation buttons to scroll to Channel Edit and press OK. Press CH or Number buttons to access to select your desired channel. 2 Press FAV. to access the Favorite List. 3 Press the /# #buttons to scrolls through channel group. 4 Edit channels using the following 4 Press the Yellow button. buttons.
Using the PROJECTOR 25 Using Additional Options Adjusting Aspect Ratio You can also change the image size by pressing Q.MENU or SETTINGS. NOTE y Some options may not be available depending on input signals. - - Zoom: Enlarges an image to fit the screen width. The top and bottom of the image may be truncated. y Press the or button to zoom in or out of the image. or button to move y Press the the image. FULL: Changes to the full screen regardless of the aspect ratio.
26 Using the PROJECTOR Using the Keystone Function Using the Input List To prevent the screen image from becoming trapezoidal, Keystone adjusts the top and bottom width of the image if the projector is not set at a right angle to the screen. Because the Keystone function may cause inferior screen image quality, use this function only when it is not possible to set up the projector at an optimal angle. Using the Input List 1 Press the INPUT button to access the input sources.
Using the PROJECTOR Blank Function Using the Blank Function This function may be effective when you need to draw attention during a meeting or training. 1 2 Press the BLANK button, and the screen is covered by the background color. You can change the background color by referring to "Selecting a Blank Image". Press any button to clear the blank function. To cover the screen temporarily, press the BLANK button on the remote control. Do not block the lens with any object while the projector is running.
28 ENTERTAINMENT ENTERTAINMENT Using WiDi Connecting to WiDi WiDi refers to Intel's Wireless Display technology. If you have a notebook that supports Intel WiDi, you can use the projector as an eternal monitor without using a video cable. WiDI requires a strong signal. If you experience interference, use the use the USB Extension Cable provided with the Wi-Fi dongle. Or USB Extension Cable Wi-Fi dongle Wi-Fi dongle #NOTE y Do not remove the wireless dongle during WiDi operations.
29 ENTERTAINMENT WiDi (Wireless Display) Setup 1 Set the external input of the projector to WiDi. 2# Run the WiDi( )#program on your notebook.# 3#After running the WiDi program on your notebook, a list will show all available devices that were detected. In the list, select the Projector you want and click Connect. Enter the 4 - digit number shown( ) on the screen ( ) and then click Continue.
30 ENTERTAINMENT MY MEDIA Connecting USB Storage Devices Connect a USB memory stick as shown below. When a USB storage device is connected, the USB adjustment screen appears. You cannot write or delete data on the USB storage device. USB memory stick To disconnect the USB storage device, 1 Press the Q.MENU button. 2 Use the or button to move to USB Device and press the OK button. 3 Remove the USB device. NOTE y After the USB storage device is disconnected, it cannot be read.
ENTERTAINMENT Tips for Using USB Devices y Only a USB storage device is recognizable. y USB hubs are not supported. y A USB storage device which uses its own driver may not be recognized. y The recognition speed of a USB storage device will depend on each device. y If a normal USB device does not work, disconnect and reconnect it. Please do not turn off the projector or unplug the USB device when the connected USB device is working. The USB device or stored files may be damaged.
32 ENTERTAINMENT MOVIE LIST In the Movie List, you can watch movies stored on the connected USB device. Tips for Playing Video Files y Some subtitles created by a user may not work. y Some special characters are not supported in subtitles. y HTML tags are not supported in subtitles. y Time information in a subtitle file should be arranged in ascending order to play the subtitle properly. y Changing font and color in subtitles is not supported.
ENTERTAINMENT 33 Supported Video Formats File Extensions .asf .wmv Audio/ Video Video Audio Video .divx .avi Audio .mp4 .m4v Video Audio Video .mkv Audio Video .ts .trp .tp Audio Video .vob Audio .mpg .mpeg .mpe Video Audio Codec Profile/Level Support Advanced Profile @ Level 3 (e.g.720p60, 1080i60, 1080p30) VC-1 Advanced Profile Only streams compliant to SMPTE 421M VC-1 standard are supported. Simple Profile @ Medium Level (e.g.CIF,QVGA) Main Profile @ High Level (e.g.
34 ENTERTAINMENT Supported Audio Files No Audio Codec Bit rate Sampling rate 1 MP3 32 kbps - 320 kbps 32 kHz - 48 kHz 2 AC3 32 kbps - 640 kbps 32 kHz, 44.1 kHz, 48 kHz 3 MPEG 32 kbps - 448 kbps 32 kHz - 48 kHz 4 AAC,HEAAC 24 kbps - 3844 kbps 8 kHz - 96 kHz 5 CDDA 1.44 kbps 6 LPCM Multi-channel : 44.1 kHz, 1.41 Mbps - 9.6 Mbps 88.2 kHz/ 48 kHz, 96 kHz Stereo : 176.4 kHz, 192 kHz 44.1 kHz Remark DTS Audio codec is Korea only.
35 ENTERTAINMENT Browsing Movie List Play a video file stored in the connected device. 6 Control playback by using the following buttons. 1 Connect a USB storage device. 2 Press the SETTINGS button. 3 Accesses the MY MEDIA. 4 Use the , , or button to ᯚᯛ select Movie List and press the OK button. 5 Use the , , or button to select the file you want and press the OK button. ❶ ❷ ❺ ❸ ❹ 3DJH 0RYLH /LVW 86% 6725$*( '(9,&( ERRN GRF SLF ᱇ 3DJH &KDQJH YLG 3DJH #########%XWWHUIO\B G
36 ENTERTAINMENT Options for Movie List 1 Press the Q.MENU button. 2 Use the or button to move to a desired option and press the OK button. 3 Use , , each item. or Setting Subtitle Language Description y Speed: If a subtitle is not synchronized with its video, you can adjust its speed at 0.5 sec unit. y Position: Moves the location of a subtitle. y Size: Changes the subtitle font size. Repeat Turns the repeat function on or off.
ENTERTAINMENT Registering the DivX code 37 To deregister the DivX code Please check your DivX code. For more information on the registration process, visit www.divx.com/vod. After registration, your can enjoy DivX VOD content protected by the DivX DRM code. Use the DivX deregistration code to deactivate the DivX DRM function. 1 2 Move to OPTION and press DivX(R) Press SETTINGS button to enter Setup menu. 2 Move to OPTION and press DivX(R) VOD.
38 ENTERTAINMENT PHOTO LIST You can see the photos stored on a connected device. ❶ ❷ ❸ 3DJH 3KRWR /LVW 86% 6725$*( '(9,&( Supported Photo Files ERRN GRF SLF ❺ ❹ ᱇ 3DJH &KDQJH YLG 3DJH #########%XWWHUIO\B G PHOTO (*.JPEG) Baseline: 64-pixel (width) x 64-pixel (height) - 15360-pixel (width) x 8640-pixel (height) Progressive: 64-pixel (width) x 64-pixel (height) - 1920-pixel (width) x 1440-pixel (height) y Only JPEG files are supported.
ENTERTAINMENT 6 Control playback by using the following buttons. BD MSJ [ .% > @ Setting Description Hide Hides the menu on the full size screen. y To see the menu, press the OK button on the remote control. Exit Slideshow BGM Setting Slideshow ꔦ Q.MENU Option Hide Exit Description Selects the previous or next photo. All photos are displayed during slide show. y Set the time interval of the slide show in Option ނSet Photo View menu.
40 ENTERTAINMENT Options for Photo List 1 Press the Q.MENU button. 2 Use the or button to move to a desired option and press the OK button. 3 Use , , each item. or button to set up Set Photo View Setting Description Slide Selects a slideshow speed. speed Selects a music folder for BGM the background music. (Backy You cannot change the ground music folder while the Music) background music is playing. y For background music, only the folder from the same device can be selected.
ENTERTAINMENT ❶ Description Thumbnails Abnormal file Setting Description +LGH Hides the playback bar. y Press the OK button to make the playback bar appear. ([LW Returns to the Music List screen. File not supported ❷ File List ❸ ❹ Moves to the upper level folder. Current page/Total no. of folder pages Current page/Total no. of file pages Moves to the top level folder. Moves to the upper level folder. Exit ❺ ❻ ❼ ❽ 6 Control playback by using the following buttons.
42 ENTERTAINMENT FILE LIST ❶ You can see document files stored on a connected device. ❷ 3DJH )LOH /LVW Supported File Formats 86% 6725$*( '(9,&( ❹ ❸ ᱇ 3DJH &KDQJH 'ULYH 3DJH ######### DOC %XWWHUIO\B G XLS, DOC, PPT, TXT, XLSX, PPTX, DOCX, PDF, Microsoft Office 97/ 2000/ 2002/ 2003/ 2007 Adobe PDF 1.0/ 1.1/ 1.2/ 1.3/ 1.4 y File Viewer realigns a document, so it may look different from what is displayed on a PC.
ENTERTAINMENT 6 Control playback by using the following buttons. y Click Go Page then the pop-up window for selecting the number of page appears. y Input the page to move to the page you want. y Press the volume button to zoom in or zoom out. 1. Press OK. 2. Press the Up/Down/Left/Right buttons to move to Go Page or Zoom. Go Page ꔦ Zoom Q.MENU Option Hide Exit Setting Description Go Moves to the page you want. Page Use the Up/Down/Left/Right buttons to select a page and press the OK button.
44 3D FUNCTION 3D FUNCTION 3D technology uses different video frames for each eye to add depth to the video. Before Watching 3D While Watching 3D WARNING y If you view 3D images too closely for a long period of time, it may cause blurred vision. y If you watch the projector or game screen for a long time with 3D glasses on, you may experience dizziness or eye fatigue.
3D FUNCTION CAUTION y Extra special care is required for children watching a 3D video. When Watching 3D Video y Watch 3D images within the optimum viewing angle and distance. y If you are outside the viewing angle or distance, you may not be able to watch 3D images. You cannot view 3D images when you lie down. y You may see left and right images overlapped during projector initialization after it is powered on. It may take some time for optimization.
46 3D FUNCTION Requirements for Watching 3D Images * Optimum viewing angle: Top/Bottom/Left/Right 9° Optimum viewing distance: Between 3 m and 5 m Recommended screen size: 101 cm * Basically, Watching 3D videos should be done in dark room environments only. * For 3D watching, set the energy saving mode to Minimum. NOTE y The pairing with the DLP-LINK glasses is affected by the intensity of light reflected from the screen.
3D FUNCTION 1 Please check the minimum system requirements for your computer. Minimum requirements are as follows: Microsoft® Windows® XP, Vista 32/64 bit ,Windows 7 32/64 bit Intel® Core 2 Duo or AMD Athlon™ X2 CPU or higher More than 1 GB of system memory (2 GB recommended) Free space of 100 MB or more DirectX 9 or higher Video card should support 120 vertical frequency (Hz).
48 3D FUNCTION To Use DLP-LINK (DLP-Ready) Type Glasses 1 While watching 3D images from the projector, press buttons on the glasses. 2 When you press the button, the glasses flicker to be synchronized with the 3D images. (The flickering is a unique operation method of DLP-LINK type glasses. It may be different depending on the glasses type.) 3 If the glasses flicker or problems occur while watching 3D, first turn the lights off to make the room darker.
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS SETUP Menu 1 Press the SETTINGS button. 2 Use the , , or button to select a desired item and press the OK button. 3 Use the , , or button to set up a desired item and press the OK button. 4 When you finished, press SETTINGS. Menu Description PICTURE Adjusts the image quality for optimal viewing. AUDIO Adjusts the sound quality and volume level. TIME Sets the time and time-related features. CHANNEL Sets up and edit channels.
50 CUSTOMIZING SETTINGS PICTURE Settings 1 Press the SETTINGS button. 2 Use the , , or button to select PICTURE and press the OK button. ᯒ 0RYH ᯙ 2. ؒ (QHUJ\ 6DYLQJ 0HGLXP ؒ 3LFWXUH 0RGH 6WDQGDUG ؒ &RQWUDVW , , or button to set up a desired item and press the OK button. ؒ %ULJKWQHVV ؒ 6KDUSQHVV ؒ &RORU - To return to the previous menu, press the ᰳ button. When you finished, press SETTINGS.
CUSTOMIZING SETTINGS Setting Picture Reset Aspect Ratio Picture Wizard II Screen (RGB-PC) 51 Description Restores the options of each mode to the factory default. Changes the image size to view images at its optimal size. (See p.25) By following the instructions, using the remote control, you can easily adjust the picture quality to technical standards without needing an expensive pattern device or a picture quality expert. Adjusts the picture quality of RGB-PC input.
52 CUSTOMIZING SETTINGS Setting Real Cinema Color Gamut Description Provides the optimal picture quality for watching a movie. Selects the range of colors to display. y Standard: Displays the original colors of an input signal regardless of the display features. y Wide: Sets to use the rich colors of the display. Edge EnProvides much sharper and clearer edges to the picture. hancer Expert Pattern This is a pattern used for expert adjustment.
53 CUSTOMIZING SETTINGS AUDIO Settings 1 Press the SETTINGS button. 2 Use the , , , buttons to select AUDIO $8',2 and press the OK button. ؒ $XWR 9ROXPH 2Q ؒ &OHDU 9RLFH ,, 2II ᰕ 3 Use the , , or button to set up a desired item and press the OK button. 4 ᯒ 0RYH ᯙ 2. ؒ %DODQFH / 5 ؒ 6RXQG 0RGH 6WDQGDUG - To return to the previous menu, press the ᰳ button. When you finished, press SETTINGS.
54 CUSTOMIZING SETTINGS CHANNEL Settings 1 Press the SETTINGS button. 2 Use the , , or button to select CHANNEL and press the OK button. 3 Use the , , or button to set up a desired item and press the OK button. 4 &+$11(/ ᯒ 0RYH ᯙ 2. ؒ $XWR 7XQLQJ ؒ 0DQXDO 7XQLQJ ؒ &KDQQHO (GLW - To return to the previous menu, press the ᰳ button. When you finished, press SETTINGS. The available channel settings are described in the following.
CUSTOMIZING SETTINGS 55 TIME Settings 1 Press the SETTINGS button. 2 Use the , , or button to select TIME and press the OK button. ᯒ 0RYH ᯙ 2. ؒ &ORFN ؒ 2II 7LPH 2II , , or button to set up a desired item and press the OK button. ؒ 2Q 7LPH 2II ؒ 6OHHS 7LPHU 2II ؒ $XWR 2II PLQ - To return to the previous menu, press the ᰳ button. When you finished, press SETTINGS. ؒ $XWRPDWLF 6WDQGE\ KRXUV 3 Use the 4 7,0( The available time settings are described as follows.
56 CUSTOMIZING SETTINGS LOCK Settings 1 Press MENU to access the menu. 2 Press the Navigation buttons to scroll to LOCK /2&. ؒ 6HW 3DVVZRUG ؒ /RFN 6\VWHP and press OK. ؒ ؒ ؒ ؒ ؒ ؒ 3 Press the Navigation buttons to scroll to the 4 ᯒ 0RYH ᯙ 2. setting or option you want and press OK. - To return to the previous level, press BACK. When you finished, press SETTINGS. ؒ .H\ /RFN 2II %ORFN &KDQQHO 0RYLH UDWLQJ 79 5DWLQJ &KLOGUHQ 79 5DWLQJ *HQHUDO 'RZQORDGDEOH 5DWLQJ ,QSXW %ORFN 2II The av
CUSTOMIZING SETTINGS Setting TV RatingChildren TV RatingGeneral 57 Description Blocks the children’s TV programs that parents do not want their children to watch. To block other TV programs, you should set the TV Rating-General feature. Rating Age Applies to TV-Y, TV-Y7 Fantasy Violence Applies to TV-Y7 Blocks the TV programs that you want based on the ratings by using the Parental Control Function (V-Chip).
58 CUSTOMIZING SETTINGS OPTION Settings 1 Press the SETTINGS button. 2 Use the , , or button to select OPTION and press the OK button. 3 Use the , , or button to set up a desired item and press the OK button. 4 - To return to the previous menu, press the ᰳ button. When you finished, press SETTINGS. 237,21 ؒ ؒ ؒ ؒ ؒ ؒ ؒ ؒ ؒ ؒ ؒ ؒ ؒ /DQJXDJH 3-7 0RGH $XWR .H\VWRQH .H\6WRQH %ODQN ,PDJH ' 0RGH $XWR ,QSXW 6HDUFK $XWR 3RZHU +LJK $OWLWXGH &DSWLRQ 6WDQGE\ /LJKW 'LY; 5 92' ,QLWLDO 6HWW
CUSTOMIZING SETTINGS Setting Auto Power 59 Description Makes the projector turn on automatically when the adaptor plug is inserted. Option On When the DC plug is connected to the projector, it turns on automatically. Off When the DC plug is connected to the projector, it goes into standby mode. High Altitude If the projector is used at an altitude higher than 1200 meters, turn this on. Otherwise, the projector may overheat or its protection function may be activated.
60 CUSTOMIZING SETTINGS Setting Description Adjusts the LED button indicator. Option On When the buttons are touched, their indicators are all turned on at maximum brightness. In standby mode, all LED indicators are turned on at 20 % of the maximum brightness. Off When the buttons are touched, their indicators are all turned on at maximum brightness. In standby mode, all LED indicators are turned off. DivX(R) VOD sets DivX related settings.
MAKING CONNECTIONS 61 MAKING CONNECTIONS You can connect various external devices to the ports on the projector.
62 MAKING CONNECTIONS Connecting to an HD Receiver, DVD, or VCR Player Connect an HD receiver, DVD, or VCR player to the projector and select an appropriate input mode. Connecting to a PC The projector supports Plug & Play. A PC will automatically recognize the projector and requires no driver to be installed. RGB Connection HDMI Connection With an HDMI cable, you can enjoy high quality picture and sound. Press the INPUT button on the remote control to select HDMI.
MAKING CONNECTIONS 63 Connecting to the AV INPUT Connect the output ports of an external device and the AV INPUT port of the projector. Press the INPUT button to select AV. $8',2 287 5*% 287 3& You can connect the audio cable without using a gender as shown in the illustration above.
64 MAKING CONNECTIONS Component Connection You can enjoy vivid images when you connect an external device with a RGB IN port to the component port of the projector. Press the INPUT button on the remote control to select Component. < 3% $ 9 287 35 /HIW 5LJKW $8',2 287 Connecting to Headphones You can listen to the audio through a headphone.
MAINTENANCE MAINTENANCE Clean your projector to keep it in optimum condition. Cleaning the Projector Cleaning the Lens If there is any dust or staining on the lens surface, you must clean the lens. Use an air spray or a cleaning cloth to clean the lens. To remove dust or stains, use an air spray or apply a small amount of cleaning agent onto a swab or soft cloth to lightly rub the lens. Please be aware that liquid may flow onto the lens if the product is sprayed directly onto the lens.
66 SPECIFICATIONS SPECIFICATIONS MODELS PB63U (PB63U-JE) Resolution (Pixel) 1280 (Horizontal) × 800 (Vertical) Aspect ratio 16:10 (Horizontal:Vertical) Panel size (mm) 11.623 Projection distance 0.80 m - 3.25 m (63.5 cm - 254.0 cm) (Video size) Ratio of upward 100 % projection Working range of the 3m remote control Video input NTSC M / PAL-B, D, G, H, I / PAL M / PAL N / PAL 60 / SECAM AC-DC Adaptor 19.5 V , 4.
SPECIFICATIONS Supported Monitor Display 67 HDMI/DVI-DTV/WiDi supported mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640*350 31.468 70.09 720*400 31.469 70.08 640*480 31.469 59.94 800*600 37.879 1024*768 Horizontal Frequency (kHz) Vertical Frequency (Hz) 720*480 31.469 31.5 59.94 60 60.31 720*576 31.25 50 60.00 119.99 1280*720 48.363 37.5 44.96 45 50 59.94 60 1152*864 54.348 60.053 1920*1080 1280*800 49.68 60 1360*768 47.712 60.
68 SPECIFICATIONS Open Source Software Information To obtain the source code under the GPL, LGPL, MPL and other open source licenses, which is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. If you send an email to opensource@lge.
The model and serial number of the projector are located on the back or on the side of the projector. Record them below should you ever need service.
