CUSTOMER : LGE DATE : 2017.09.06. SPECIFICATIONS FOR APPROVAL PRODUCT NAME : BT(v4.2) + WLAN(802.11a/b/g/n/ac) 2.4G SISO/5G MIMO MODEL NAME : RBHP-B213B CUSTOMER P/N : EAT63433501 APPROVAL REMARK APPENDIX Designed Checked Approved LG Innotek Co., Ltd. DOCUMENT No.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (5 / 68) (CUSTOMER P/NO : EAT63433501 ) 1. Application v This specification is applied to LGInnotek Bluetooth (v4.2)and 2.4GHz SISO/5GHz MIMO WLAN(802.11a/b/g/n/ac) Module RBHP-B213B which includes BCM88359 2. Quality Quality should meet each condition which mentioned on this specification. However, the items which are not mentioned on this specification follow the inspection agreements and standards which are agreed with both companies. 3.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (6 / 68) (CUSTOMER P/NO : EAT63433501 ) 6. Test Electrical characteristics are tested for every products. However, if there are any objection in judgments, it should be treated with agreements of companies. 7. Labeling Information p GWANGGAETOH No. ① PRODUCT ① RBHP-B213B ② MODEL PART NO.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (7 / 68) (CUSTOMER P/NO : EAT63433501 ) 8. Mechanical Dimension 1) Dimension without Antenna Ass’y [Unit: mm] 1.2 2017. 05.23. Rev1.2 Released R 1.3 2017. 06.27. Rev1.3 Released E 1.4 2017. 07.14. Rev1.4 Released V 1.5 2017. 08.10. Rev1.5 Released 1.6 2017. 09.06. Rev1.6 Released DSGD LG Innotek Co., Ltd CHKD APPD RBHP-B213B DOCUMENT NO.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (8 / 68) (CUSTOMER P/NO : EAT63433501 ) 8. Mechanical Dimension 2) Dimension with Antenna Ass’y [Unit: mm] 1.2 2017. 05.23. Rev1.2 Released R 1.3 2017. 06.27. Rev1.3 Released E 1.4 2017. 07.14. Rev1.4 Released V 1.5 2017. 08.10. Rev1.5 Released 1.6 2017. 09.06. Rev1.6 Released DSGD LG Innotek Co., Ltd CHKD APPD RBHP-B213B DOCUMENT NO.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (9 / 68) (CUSTOMER P/NO : EAT63433501 ) 9. General Features 9.1 BT(v4.2) + 2.4GHz/5GHz WLAN(IEEE 802.11a/b/g/n/ac) 2.4G SISO/5G MIMO 1) Features • Operation Voltage is 3.3V/1.8V Dual Power Rail • WiFi Single-stream up to 866 Mbps data rate • Automotive Module : All components are AEC-Q 100/200 qualified • Support 2 Antenna port : ANT0 : Bluetooth/5G WLAN, ANT1 : 2.4G/5G WLAN • Integrated WLAN PA, RF Switch and LNA • RoHS Compliant • Size : 35.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (10 / 68) (CUSTOMER P/NO : EAT63433501 ) 9. General Features 9.2 Bluetooth(BT v4.2+EDR compliant) 1) Bluetooth Key Features • Supports key features of upcoming Bluetooth standards • Fully supports Bluetooth Core Specification version 4.2 + (Enhanced Data Rate) EDR features: -. Adaptive Frequency Hopping (AFH) -. Quality of Service (QoS) -. Extended Synchronous Connections (eSCO) – Voice Connections -.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (11 / 68) (CUSTOMER P/NO : EAT63433501 ) 9. General Features 9.3 WLAN 1) WLAN RF band & modulation Features • Dual-band 2.4GHz and 5GHz 802.11 a/b/g/n/ac(802.11ac compliant) • Up to 866Mbps data rate • Supports 20, 40 and 80MHz channels with optional SGI(256 QAM modulation) • Tx and Rx low-density parity check(LDPC) • Supports IEEE 802.11ac/n beamforming • Supports PCIe v3.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (12 / 68) (CUSTOMER P/NO : EAT63433501 ) 9. General Features 9.3 WLAN 3) WLAN PHY features • Programmable data rates from MCS0-9 in 20MHz, 40MHz, and 80MHz channels, as specified in IEEE 802.11ac • Improved performance with channel smoothing and spur canceller support • Supports Optional short GI and Green field modes in Tx and Rx • Tx and Rx LDPC for improved range and power efficiency • Beamforming support • Supports IEEE 802.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (30 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics 1) SDIO Interface I/O pins and PCIe out of band signals(PERST_N/PME_L/CLKREQ_N) *VIO_SD= 1.8V Item Symbol Min Typ Max Unit Input high voltage VIH 1.27 - - V Input low voltage VIL - - 0.58 V Output high voltage@2mA VOH 1.40 - - V Output low voltage@2mA VOL - - 0.45 V Symbol Min Typ Max Unit Input high voltage VIH 0.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (31 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics *VIO = 3.3V Item Symbol Min Typ Max Unit Input high voltage VIH 2.00 - VIO+0.1 V Input low voltage VIL - - 0.8 V Output high voltage@2mA VOH VIO-0.4 - - V Output low voltage@2mA VOL - - 0.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (32 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics - Control signal timing diagrams *WLAN =ON, Bluetooth = ON *WLAN =OFF, Bluetooth = OFF 1.2 2017. 05.23. Rev1.2 Released R 1.3 2017. 06.27. Rev1.3 Released E 1.4 2017. 07.14. Rev1.4 Released V 1.5 2017. 08.10. Rev1.5 Released 1.6 2017. 09.06. Rev1.6 Released DSGD LG Innotek Co., Ltd CHKD APPD RBHP-B213B DOCUMENT NO.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (33 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics - Control signal timing diagrams *WLAN =ON, Bluetooth = OFF *WLAN =OFF, Bluetooth = ON 1.2 2017. 05.23. Rev1.2 Released R 1.3 2017. 06.27. Rev1.3 Released E 1.4 2017. 07.14. Rev1.4 Released V 1.5 2017. 08.10. Rev1.5 Released 1.6 2017. 09.06. Rev1.6 Released DSGD LG Innotek Co., Ltd CHKD APPD RBHP-B213B DOCUMENT NO.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (34 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics - Boot-Up Sequence and Reset timing 3.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (35 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics r - PCIe Power-on Timing *Timing Parameter WL_REG_ON)Perst# Deassertion – First Config Access) 1.2 2017. 05.23. Rev1.2 Released R 1.3 2017. 06.27. Rev1.3 Released E 1.4 2017. 07.14. Rev1.4 Released V 1.5 2017. 08.10. Rev1.5 Released 1.6 2017. 09.06. Rev1.6 Released DSGD LG Innotek Co., Ltd CHKD APPD RBHP-B213B DOCUMENT NO.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (36 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics 5) UART characteristics -. UART physical interface is a standard, 4-wire interface(Rx, Tx, RTS, CTS) with adjustable baud rates from 9600 bps to 4Mbps. Normally the UART baud rate is set by a configuration record downloaded after reset or by automatic baud rate detection. LGIT Module supports HCI 3-wire transport(UART H5) -.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (37 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics 6) PCM characteristics -. LGIT Module PCM interface can connect to linear PCM codec devices in master or slave mode. In master mode, the device generates the PCM_CLK and PCM_SYNC signals. In slave mode, these signals are provided by another master on the PCM interfaces as inputs to the devices -. Short frame sync, master mode timing diagram -.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (38 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics 6) PCM characteristics -. Short frame sync, slave mode timing diagram -.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (39 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics 6) PCM characteristics -. Long frame sync, master mode timing diagram -.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (40 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics 6) PCM characteristics -. Long frame sync, slave mode timing diagram -.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (41 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics 7) SDIO characteristics -. RBHP-B213B support up to SDIO 3.0 specification · DS : Default speed(DS) up to 25MHz(3.3V signaling) · SDR12 : SDR up to 25MHz(1.8V signaling) · SDR25 : SDR up to 50MHz(1.8V signaling) · SDR50 : SDR up to 100MHz(1.8V signaling) · SDR104 : SDR up to 208MHz(1.8V signaling) · DDR50 : DDR up to 50MHz(1.8V signaling) -.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (42 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics -. SDIO default mode bus timing parameters Item Symbol Min Typ Max Unit Freq.(data transfer mode) fPP 0 - 25 MHz Freq.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (43 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics -. SDIO high speed mode bus timing(min.Vih = 0.7 X VIO, max.Vil = 0.2 x VIO) -. SDIO high speed mode bus timing parameters Item Symbol Min Typ Max Unit Freq.(data transfer mode) fPP 0 - 50 MHz Freq.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (44 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics Item Symbol Min Typ Max Unit Input setup time tISU 6 - - ns Input hold time tIH 2 - - ns Output delay time-data transfer mode tODLY - - 14 ns Output delay time-data identification mode tODLY 2.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (45 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics -. SDIO SDR mode Device input timing Item Symbol Min Max Unit Comments SDR104 Mode tIS 1.4 - ns CCARD = 10pF, VCT=0.975V tIH 0.8 - ns CCARD = 5pF, VCT=0.975V SDR50 Mode tIS 3 - ns CCARD = 10pF, VCT=0.975V tIH 0.8 - ns CCARD = 10pF, VCT=0.975V 1.2 2017. 05.23. Rev1.2 Released R 1.3 2017. 06.27. Rev1.3 Released E 1.4 2017. 07.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (46 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics -. SDIO SDR mode Device output timing(SDR modes up to 100MHz) Symbol Min Max Unit Comments tODLY - 7.5 ns tCLK > 10ns, CL = 30pF using driver type B for SDR50 tODLY - 14.0 ns tCLK > 20ns, CL = 40pF using for SDR12, SDR25 tOH 1.5 - ns Hold time at the tODLY (min) CL = 15pF 1.2 2017. 05.23. Rev1.2 Released R 1.3 2017. 06.27. Rev1.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (47 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics -. SDIO SDR mode Device output timing(SDR modes 100MHz to 208MHz) Symbol Min Max Unit Comments tOP 0 2 UI Card output phase ΔtOP -350 +1550 Ps Delay variation due to temp. change after tuning ΔtODW 0.60 - UI ΔtODW = 2.88ns @208MHz 1.2 2017. 05.23. Rev1.2 Released R 1.3 2017. 06.27. Rev1.3 Released E 1.4 2017. 07.14. Rev1.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (48 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics -. SDIO DDR50 mode Clock timing Item Symbol Min Max Unit Comments - tCLK 20 - ns DDR50 mode - tCR, tCK - 0.2x tCLK ns tCR, tCF < 4.0ns(max)@50MHz CCARD = 10pF Clock duty - 45 55 % - 1.2 2017. 05.23. Rev1.2 Released R 1.3 2017. 06.27. Rev1.3 Released E 1.4 2017. 07.14. Rev1.4 Released V 1.5 2017. 08.10. Rev1.5 Released 1.6 2017.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (49 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics -. SDIO DDR50 mode Data timing Item Symbol Min Max Unit Comments Input CMD Input Setup time tISU 6 - ns CCARD < 10pF(1CARD) Input Hold time tIH 0.8 - ns CCARD < 10pF(1CARD) Output CMD Output delay time tODLY - 13.7 ns CCARD < 30pF(1CARD) Output hold time tOH 1.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (50 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics 8) PCI Express characteristics s -. PCI Express Reference CLK Parameters Symbol Comments Min. Typ. Max Unit Baud rate BPS - - 2.5 - Gbaud Reference clock amplitude Vref LVPECL, AC coupled 1.0 - - V -. PCI Express Receiver Parameters Symbol Comments Min. Typ.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (51 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics 8) PCI Express characteristics -. PCI Express Transmitter Parameters Symbol Comments Min. Typ. Max Unit Output voltage VTXDIFFp-p Differential p-p, programmable in 16 steps 0.8 - 1200 mV 20% to 80% 0.125 (2.5 GT/s) 0.15 (5 GT/s) - - UI - - UI Output voltage rise time VTX-RISE Output voltage fall time VTX-FALL 80% to 20% 0.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (52 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.3 I/O characteristics 8) PCI Express characteristics Parameters Symbol Comments Min. Typ. Max Unit TX short circuit current ITXSHORT Current limit when TX output is shorted to ground. - - 90.0 mA DC differential TX termination ZTXDIFF-DC Low impedance defined during signaling (parameter is captured for 5.0 GHz by RLTX-DIFF) 80.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (53 / 68) (CUSTOMER P/NO : EAT63433501 ) 10. Electrical Specification 10.4 Operating Conditions 1) Recommended operation conditions Parameter Min Max Unit Operating Temperature Range -40 +85 ℃ Supply Voltage : VBATT (3.3V) 3.01) 3.6 V Supply Voltage : VIO (1.8V) 1.62 1.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (54 / 68) (CUSTOMER P/NO : EAT63433501 ) 11. Pin Configuration < Opposite (Host) Pin Map (Top View) > * Position#1 Indicator * * 20 1 21 40 1.2 2017. 05.23. Rev1.2 Released R 1.3 2017. 06.27. Rev1.3 Released E 1.4 2017. 07.14. Rev1.4 Released V 1.5 2017. 08.10. Rev1.5 Released 1.6 2017. 09.06. Rev1.6 Released DSGD LG Innotek Co., Ltd CHKD APPD RBHP-B213B DOCUMENT NO.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (59 / 68) (CUSTOMER P/NO : EAT63433501 ) 12. Reliability Test Conditions 12.1 Items related with Non-Solderability(ES96100-02) NO 9 ITEM Against flux Condition Characteristics Initial value measured at standard test condition. Test Conditions -Soak 5 seconds in a I.P.A and let waiting condition for 35 seconds. After then test. - No electrical problem Initial value measured at standard test condition. Test Conditions: 3 cycle condition.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (60 / 68) (CUSTOMER P/NO : EAT63433501 ) 12. Reliability Test Conditions 12.1 Items related with Non-Solderability(ES96100-02) NO ITEM Condition Characteristics Initial value measured at standard test condition. Test Conditions: 1 hour 70 65 14 Temperature Drift Test Temperature (℃) 55 45 - No electrical problem 25 0 -10 -20 Take measurements sustaining each temperature. 15 Dust IInitial value measured at standard test condition.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (61 / 68) (CUSTOMER P/NO : EAT63433501 ) 12. Reliability Test Conditions 12.2 Items related with Solderability(ES90000-04) NO ITEM 1 High Temperature and Humidity Load Test Initial value measured at standard test condition. Test Conditions: 85±3℃, 85±5%RH, 1000hr In standard test condition, take measurements within 3hr. Thermal Shock Initial value measured at standard test condition.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (64 / 68) (CUSTOMER P/NO : EAT63433501 ) 15.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (65 / 68) (CUSTOMER P/NO : EAT63433501 ) 16. Recommended Land Pattern 1)Top view c 1.2 2017. 05.23. Rev1.2 Released R 1.3 2017. 06.27. Rev1.3 Released E 1.4 2017. 07.14. Rev1.4 Released V 1.5 2017. 08.10. Rev1.5 Released 1.6 2017. 09.06. Rev1.6 Released DSGD LG Innotek Co., Ltd CHKD APPD RBHP-B213B DOCUMENT NO.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (66 / 68) (CUSTOMER P/NO : EAT63433501 ) 17. Packing Information of top on BOX. (400X250X285) 1.2 2017. 05.23. Rev1.2 Released R 1.3 2017. 06.27. Rev1.3 Released E 1.4 2017. 07.14. Rev1.4 Released V 1.5 2017. 08.10. Rev1.5 Released 1.6 2017. 09.06. Rev1.6 Released DSGD LG Innotek Co., Ltd CHKD APPD RBHP-B213B DOCUMENT NO.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (67 / 68) (CUSTOMER P/NO : EAT63433501 ) 17. Packing Information q Item ① ② EAT63433501 LGE v1.0 ⑥ Spec RBHP-B213B ⑦ ⑧ ③ ④ 2016.05.30 ⑤ 130 LotNo 6530 - 001 ⑨ ⑩ ⑪ No. Index ① POSITION (ITEM / OUTBOX) ② CUSTOMER ③ FIRMWARE VERSION (vX.X) ④ SHIPPING DATE (YYYY.MM.DD) ⑤ BARCODE (Customer P/N, Quantity) Ex) EAT63433501 130 ⑥ CUSTOMER P/N ⑦ QUANTITY ⑧ MODEL P/N ⑨ LOT NUMBER ⑩ BARCODE (Lot No.
TITLE : Specifications for approval (RBHP-B213B) REV 1.6 (68 / 68) (CUSTOMER P/NO : EAT63433501 ) 18. Ordering Information R B H P - B 2 1 3 A Product RB Bluetooth Module Type H BT(Class2)+WLAN Host Interface P PCIe Chipset Maker B Broadcom Serial Number 213 213 Revision A A Version 1.2 2017. 05.23. Rev1.2 Released R 1.3 2017. 06.27. Rev1.3 Released E 1.4 2017. 07.14. Rev1.4 Released V 1.5 2017. 08.10. Rev1.5 Released 1.6 2017. 09.06. Rev1.6 Released DSGD LG Innotek Co.
FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules.
2.2 List of applicable FCC rules List the FCC rules that are applicable to the modular transmitter. These are the rules that specifically establish the bands of operation, the power, spurious emissions, and operating fundamental frequencies. DO NOT list compliance to unintentional-radiator rules (Part 15 Subpart B) since that is not a condition of a module grant that is extended to a host manufacturer. See also Section 2.
2.6 RF exposure considerations It is essential for module grantees to clearly and explicitly state the RF exposure conditions that permit a host product manufacturer to use the module. Two types of instructions are required for RF exposure information: (1) to the host product manufacturer, to define the application conditions (mobile, portable – xx cm from a person’s body); and (2) additional text needed for the host product manufacturer to provide to end users in their end-product manuals.
