User's Manual

LGE

Electronics Inc.

Microphone Installation

Install the microphone either by cliiping I onto the sunvisor (driver’s side) or by attaching it to door post

(driver’s side), using a velcno adhesive tape (not included).

Cable Connections

Power and Ignition Cables

Connect the red wire to the car battery positive terminal and the black wire to the car ground. Connect

the green wire to the car ignition sensor terminal. ( In order to operate HFK please make sure to

connect green wire to ignition sensor terminal.) Connect the kit’s power cable connector to the

interface box power receptacle.

Antenna Cable Connection

Connect the antenna coupler cable connector from the cradle to the external antenna connector.

( Antenna is not included.)