User's Manual

Call ( [Menu]+ [5]+[4] )
1. Any key answer ( [Menu]+[5]+[4]+[1] )
If Incomming call, enabled to call pressing any key.
2. Auto answer ( [Menu]+[5]+[4]+[2] )
Select the ring type before the phone automatically answers a call. This feature is most
commonly used with the car kit. off
 after 1 ring(or melody 5 seconds)
 after 3 rings(or melody 10 seconds)
 Off
When you have incoming call, the phone automatically response with pre-recorded voice
message and record caller’s speech after 3 rings.
3. Auto redial ( [Menu]+[5]+[4]+[3] )
Set the length of time the phone waits before automatically redialing a number when the
attempted call fails.
 off / every 10 seconds / every 30 seconds / every 60 seconds
4. Voice privacy ( [Menu]+[5]+[4]+[4] )
Set the voice privacy feature for CDMA calls as “Enhanced” or “Standard : CDMA offers
inherent voice privacy. Check with your service provider for availability of the enhanced voice
privacy mode
5. Clear voice ( [Menu]+[5]+[4]+[5] )
When this menu option is active, phone remove noise of environment.
6. Call timer ( [Menu]+[5]+[4]+[6] )
When this menu option is inactive, LCD will not display call timer in call mode.
7. help ( [Menu]+[5]+[4]+[7] )
Display help about Call menu
Phone ( [Menu]+ [5]+[5] )
1. Menu style ( [Menu]+[5]+[5]+[1] )
You can select one of 2 menu type
 List : LCD will display listed menu and you can select menu with [5] [6] or [v] key.
 Icon : LCD will display animation menu and you can select menu with [34] key.
2. Data settings ( [Menu]+[5]+[5]+[2] )
In “Data/Fax” setting, data and fax can be transmitted. Wireless data communication services
refer to utilization of subscriber terminals for access to internet with personal computer or
laptops at 8Kbps or at maximum of 13Kbps.
 Data In : This setting enables the subscriber terminal to receive data calls.
 Fax In : This setting enables the subscriber terminal to receive fax transmittals.
3. Key guard ( [Menu]+[5]+[5]+[3] )
When this option is enabled, no key press acceptable except 0 key.
4. Select line ( [Menu]+[5]+[5]+[4] )
Select the phone’ s NAM (Number Assignment Module) if the phone is registered with multiple
service provides
5. Phone info ( [Menu]+[5]+[5]+[5] )