Operating Manual LG-RD3330 User Guide CDMA PHONE
Contents Introduction Highlights Important Information Check Accessories Before You Start FCC RF EXPOSURE INFORMATION Chapter 1. Getting Started Cautions Phone Overview On screen Icons Chapter 2. Basic Functions Turning the Phone On and Off Making a Call Correcting Dialing Mistakes Receiving Calls Emergency Dialing Speed Dialing Phone Book Features Chapter 3. Menu Features General Guidelines to MENU Access and Settings Names Messages Call History Profiles Setting Planner System Chapter 4.
Appendix. RF Exposure Statement Appendix 2.
Chapter 1. Getting Started Cautions z z z z z z z z z Using the phone in proximity to receiving equipment (i.e., TV or radio) may cause interference. Keep your phone in a safe place when not in use. Only use the batteries, antennas, and chargers provided by LG. Using the wrong accessories could void your warranty. Only authorized personnel should service the phone and its accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty.
In use A call is in progress. No icon indicates the phone is in standby mode. Digital indicator Digital service is available. Analog indicator Analog service is unavailable Indicates that a text message or voice mail has been received Roaming The phone is outside of its home service area. Charge level Indicates battery charge level. D Chapter 2. Basic Functions Turning the Phone On and Off Turning the Phone On 1.
Correcting Dialing Mistakes If you make mistakes in dialing a number, press [CLR] key once to erase the last entered digit or hold down [CLR] for at least two second to delete all digits, or simply press soft key 2 [BACK] to exit dialing state. Receiving Calls 1. When the phone rings, press any key (except [END/PWR], [5][6], [3((]) to answer. z If you press the key [END/PWR] once when you receive a call, you can hold the present call and ring sound or vibration stops.
3. Press[v] to go through the list of menu features. 4. Press the corresponding number to the menu item that you want to select. Then the sub-menu list will appear on the screen. 5. Press the appropriate key to select the sub-menu you want to access. 6. Select preferred settings, using the [v] keys. Press Soft Key 2 [Back] to go one step backward while accessing menu or selecting settings. 7. Press Soft Key 1 [Ok] to save the settings or Soft Key 2 [Back] to cancel without saving.
Silent ([Menu]+[4]+ [2]) This menu is the same with General Menu General ([Menu]+[4]+ [3]) Press Soft Key 1[Option] and LCD will display sub menu. Then select menu you want with [5] [6] or [v] key. 1. Set – Setting profile to General. 2. Adjust (1) Call Alert Types : Select one out of 6 ring types (Ring, Vibrate, Vib & Ring, Ring after vibrate, Silent and Light) with [5] [6] or [v] key. (2) Ring Tone : Select the ringer sound with [5] [6] or [v] key.
3. Clock ( [Menu]+[5]+[3] ) You can determine that clock display or not in standby. 4. Wallpaper ( [Menu]+[5]+[4] ) You can set up the screen displayed on the LCD screen in the standby mode. (Theme, Current Profiles display,Banner) 5. Menu Style ( [Menu]+[5]+[5] ) Icon : LCD will display animation menu and you can select menu with [34] key. List : LCD will display listed menu and you can select menu with [5] [6] or [v] key. 6. Rhythmic Lighting ( [Menu]+[5]+[6] ) You can set up the Rhythmic LED Lignt 7.
2. Call Waiting ( [Menu]+[6]+[2]+[2] ) Set Call Waiting options Enable / Disable 3. Any key answer ( [Menu]+[6]+[2]+[3] ) If Incomming call, enabled to call pressing any key. 4. Auto redial ( [Menu]+[6]+[2]+[4] ) Set the length of time the phone waits before automatically redialing a number when the attempted call fails. z off / every 10 seconds / every 30 seconds / every 60 seconds 5.
Security ( [Menu]+ [6]+[4] ) 1. Lock mode ( [Menu]+[6]+[4]+[1] ) Helps you to protect your phone from unauthorized use and once the phone is locked, the phone is restricted from making calls until the lock code is entered. However you can still receive phone calls and make emergency calls while your phone is locked. “Never” means that the phone is never locked (Lock mode can be used). When locked, you can only make emergency calls or receive incoming calls.
Chapter 4. Book Features Names ([Menu]+[1]) Add name ([Menu]+[1]+[1]) 1. Press Soft Key 1 [Menu] 2. Press [1] 3. Enter the phone number you want to add. 4. Select number’s destination (Home, Office, Mobile and Other) 5. Enter name 6. Press Soft Key 1 [Save] Find ([Menu]+[1]+[2]) 1. Press Soft Key 1 [Menu] 2. Press [2] 3. Enter the name you want to find. 4. You can go another find menu using Soft Key 1 [Option] 5. In Find number, Enter the number you want to find. 6.
Chapter 5. Message Features Text message, page and voice mailbox become available as soon as the power is on. You can access the above types of messages using the message key ([5]). In addition, you can make a call to the call back number by pressing the [Send] during a message check. The phone can store up to 31 messages (Voice message : 1, Text messages 30) with 140 characters per message. However, you should check whether your carrier provides the above features.
B. Enter Message Menu and Press [Option] C. Select [Send] • Send : send msg • Save : save to Draft • Insert Temp : save to templates D. Enter Phone Number. If you want to send to number saved in book, press[Find] 2. Inbox ([5]+[2]) A. Press [Select] B. Press [Option] C. Select [View] • View : view received msg • Erase : erase received msg • Reply : send msg to #CB 3. 1234 Services([5]+[3]) 4. Outbox ([5]+[4]) A. Press [Select] B. Press [Option] C.
• Erase : erase msg 7. Draft ([5]+[7]) 1) Press [Select] 2) Press [Option] 3) Select [View] • View : view msg • Erase : erase msg 4) From this state the same with Write message 8. Templates ([5]+[8]) 1) Press [Select] 2) Press [Option] 3) Select [View] • View : view template • Erase : erase template • Add : Add template 4) Add string 5) From this state the same with Write Message 9. Msg Groups ([5]+[9]) 1) Press [Select] 2) Press [Add] 3) Select Phonebook entry in phonebooke find menu.
• • • • • Delivery ack : You can select Delivery ack (On / Off) Deferred delivery : You can select Deferred delivery (Immediate, After 30 Min etc) Validity period : You can select Validity period. (Default, 30 Min etc) Save sent message : You can select repeat alert (Yes / No) Auto delete inbox : You can select repeat alert (Yes / No) 10. Help ([5]+[#]) Display help about Messages Menu. ####->[6. SMS MO] Select 1. SO : Select 8K or 13K 2. L3ACK : Select ON/OFF Chapter 6.
Battery (LGIP-A800) Standard battery and Extended battery are available. Desktop Charger The desktop charger, model DC-41W, allows you to place the phone for charging the stand. It can charge a completely discharged battery in 3 hours. Cigar Lighter Charger You can operate the phone and trickle charge the phone’s battery from your vehicle by using the cigarette lighter charger, model CLC-11W. It takes 5 hours to charge a completely discharged battery.
Appendix 1. RF Exposure Statement WARNING! Read this information before operating the phone. In August 1996, the Federal Communications (FCC) of the United States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for human exposure to radio frequency(RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
Appendix 2. Consumer Information on SAR (Specific Absorption Rate) This Model Phone Meets the Government’s Requirements for Exposure to Radio Waves. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.