User’s Guide T750PH plus T750BH plus Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached on the back cover and quote this information to your dealer when you require service.
Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this monitor, observe the following basic rules for its installation, use, and servicing. Keep it in an accessible place for future reference. On Safety Use only the power cord supplied with the unit.
Important Precautions To Prevent Fire or Hazards: Always turn the monitor OFF if you leave the room for more than a short period of time. Never leave the monitor ON when leaving the house. Keep children from dropping or pushing objects into the monitor's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this monitor.
Important Precautions NOTE THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTRERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. NOTE This epuipment has been tested and found to comply with the limits for a class B digital device,pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Connecting the Monitor Before setting up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices. Carefully set the monitor face-down with the underside facing you. Connecting the Tilt/Swivel stand 1. Align the hooks on the tilt/swivel stand with the matching slots in the base of the monitor. 2. Insert the hooks into slots. 3. Slide the tilt/swivel stand toward the front of the monitor until the latches click into the locked position.
Connecting the Monitor Using the Computer 1. Connect the signal cable. When mated, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a properly power outlet that is easily accessible and close to the monitor. NOTE This is a simplified representation of the rear view. This rear view represents a general model; your monitor may differ from the view as shown. Signal Cable Power Cord Attached Type* * Detached Type* * Varies according to model.
A6
A7
A8
(A9~A12).
A9 A10
A9 A9 A11
A9 A12
Troubleshooting Check the following before calling for service. No image appears ❐ Is the power cord of the monitor connected? • Check and see if the power cord is connected properly to the power outlet. ❐ Is the power indicator light on? • Press the Power button. ❐ Is the power on and the power indicator green? • Adjust the brightness and the contrast.
Troubleshooting The screen color is not normal. ❐ Do you see basic • Set the color depth to 256 colors or higher: use 'Control discoloration (16 colors)? Panel' -> 'Display' -> 'Settings' -> 'Color Palette' ❐ Is the screen color • Check the connection of the signal cable. Or pull out the unstable or monochrome? video card of the PC and insert it again.
A15
Specifications Preset Modes (Resolution) Display Modes (Resolution) 1 2 3 4 5 VESA VESA VESA VESA VESA Horizontal Freq. (kHz) 37.50 46.88 53.674 68.677 60.289 640 x 480 800 x 600 800 x 600 1024 x 768 1280 x 768 A16 Vertical Freq.
Digitally yours