LG-TM520 User Guide CDMA/AMPS/PCS TRI-MODE PHONE
FCC RF EXPOSURE INFORMATION WARNING! Read this information before using your phone In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
Contents Introduction Highlights Important Information Check Accessories Before You Start FCC RF EXPOSURE INFORMATION Chapter 1. Getting Started Cautions Phone Overview On screen Icons Chapter 2. Basic Functions Turning the Phone On and Off Making a Call Correcting Dialing Mistakes Receiving Calls Using Quick Mode Call Waiting Mute Redialing Calls Adjusting the Volume Power Save Mode Signal Strength Emergency Dialing Mini Display Speed Dialing Caller ID Phone Book Features Chapter 3.
Viewing Your Telephone Number Chapter 5. Message Features Voice Send Msg New Text Old Text Erase All Setting Chapter 6. Functions used during a call Mute Memo Recording Key Tone Voice Privacy Chapter 7.
Chapter 1. Getting Started Cautions l l l l l l l l l Using the phone in proximity to receiving equipment (i.e., TV or radio) may cause interference. Keep your phone in a safe place when not in use. Only use the batteries, antennas, and chargers provided by LG. Using the wrong accessories could void your warranty. Only authorized personnel should service the phone and its accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty.
In use A call is in progress. No icon indicates the phone is in standby mode. Digital indicator Digital service is available. Analog indicator Analog service is available Indicates that a text message or voice mail has been received Roaming The phone is outside of its home service area. Charge level Indicates battery charge level. Chapter 2. Basic Functions Turning the Phone On and Off Turning the Phone On 1.
Receiving Calls 1. When the phone rings, open cellcase or If cellcase is open, press any key (except [END/PWR], [5][6], [3v4]) to answer. l If you press the key [END/PWR], Side Keys ([5][6]) once when you receive a call, you can hold the present call and ring sound or vibration stops. If you press the [END/PWR] key, Side Keys ([5][6]) twice, the present call is terminated. 2. Press [END/PWR] to disconnect the call. In call waiting mode, the present call is on hold as you answer another incoming call.
Chapter 3. Menu Features General Guidelines to MENU Access and Settings 1. Press Soft Key [Menu]. The three menu items will appear on the display screen. 2. Press[v] to go through the list of menu features, or use the side keys. 3. Press the corresponding number to the menu item that you want to select. Then the sub-menu list will appear on the screen. 4. Press the appropriate key to select the sub-menu you want to access. 5. Select preferred settings, using the [v] keys.
turned off 10 seconds after the last key is pushed. the backlight is turned off 30 seconds after the last key is pushed. “On when Cellcase open” means that the backlight is always on while Cellcase is open. “Always on” means that the backlight is on regardless of the Status of Cellcase. Choosing “Always on” significantly decreases talk time. “Always off” means that the backlight is never on.
SIO Config ([Menu]+ [3]+[7]) If you want to use HSPD mode, you should set the baud rate as 230,400 bps in the menu 2 (Data Baud menu). 1. Port Map (DATA DIAG OPTION) U1 U2 -- : When using UART 1 and UART2 simultaneously U1 -- HFK : When using UART 1 only for normal case 2. Data Baud (Data Baud Set) AUTOBAUD : Default Data Baud Rate (ipr = 0) 9,600/19,200/38,400/57,600/115,200/230,400 : Optional Data Baud Rate 3.
and phone numbers in Phonebook Entry. You can still receive calls in restrict mode. Check with your service provider. Clear Call ([Menu]+ [5]+[3]) Allows you to delete all the telephone number saved in the “Call History”. Clear Data ([Menu]+ [5]+[4]) Deletes all information saved in the memory location(001-199) (Entry 9 is designated to Emergency Call). Be careful since any deleted information is not recoverable.
[CLR] to start this feature. On auto mode, this feature will be available upon opening the cellcase. On Disable mode, Voice dialing is disabled when you press [CLR], Disabled message will be displayed on the screen. Chapter 4. Book Features Call History ([PIM]+ [1]) Allows you to view the 30 most recently dialed phone numbers. Once you exceed the 30-number storage limit, the oldest call history record is overwritten.
Phone Book ([PIM]+[2]) Find Entry ([PIM]+[2]+[1]) 1. Press Soft Key 2 [PIM] 2. Press [Phone Book] [Find Entry] 3. Your phone will prompt you to enter entry by displaying “Enter Entry #” on display screen. 4. Enter entry. If you select [OK] Key without entering any entry, you may view the entire list saved in your phone book. Search Name ([PIM]+[2]+[2]) 1. Press Soft Key 2 [PIM] 2. Press [Phone Book] [Find Name] 3. Enter the name you want to search for and press [Find] key.
Scheduler ([PIM]+[3]) WakeUp ([PIM]+[4]) Game ([PIM]+[5]) Calculator ([PIM]+[6]) Chapter 5. Message Features Text message, page and voice mailbox become available as soon as the power is on. You can access the above types of messages using the message key ([5]). In addition, you can make a call to the call back number by pressing the [Send] during a message check. The phone can store up to 30 messages (Voice message : 1, Text messages 29) with 245 characters per message.
1. Voice D 07/09 12:30pm VOICE MAIL 019-408-8144 1 New messages Message Qui DEL - It indicates the number of the voice messages in the voice mailbox. 2. Send Msg D Ok Select ‘ ok’ to input the message. D Ok Select ‘ ok’ to send the message. 3. NewMsgs - Menu to check the message received. D 07/09 12:30p MESSAGE from 019-408-8144 I love you DEL NEX T Select the ‘DEL’.
4. OldMsgs D >I love you DEL VIE - It indicates the checked but not erased messages in the form of he list. - It indicates the checked and stored message in the form of the list. Move the location of > with the upside or downside key to select the message. 5. Erase All - This service enables erasing of all the messages stored by the message service. D Erase All Message yes no Enter ‘ MENU’ ->’ 4 System’ ->’ 0’ ->’ 000000’ ->’ 5 SMSMO’ Select 1.
l pressed. Long : Sends out a continuous tone as long as you keep the key pressed. Voice Privacy (During a call : [MENU]+[5] ) Set the voice privacy feature for CDMA calls as “Enhanced” or “Standard” : CDMA offers inherent voice privacy. Check with your service provider for availability of the enhanced voice privacy mode. Chapter 7. Accessories There are a variety of accessories available for the phone. You can select these options according to your personal communication requirements.
