User Manual VX9900 Ver. 0.1 2006. 4.
LIMITED WARRANTY STATEMENT 1. WHAT THIS WARRANTY COVERS: LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be free from defects in material and workmanship, according to the following terms and conditions: (1) The limited warranty for the product extends for ONE (1) year beginning on the data of purchase of the product.
(10) Products used or obtained in a rental program. (11) Consumables (such as fuses). 3. STATE LAW RIGHTS: No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG INFOCOMM INC.
SUBJECT The phone VX9900 has been designed to operate on the latest digital mobile communication technology, Code Division Multiple Access (CDMA). The phone VX9900 support fully Multimedia - Dual color LCDs, 64poly Audio, 2.0M pixels Digital Camera, MPEG-4, Photo album, etc. This phone is the one of tri band Tri mode - 800Mhz CDMA, 1900Mhz PCS, 1500Mhz GPS.
Table of Contents Introduction Highlights Important Information Check Accessories Before You Start Safety Instructions Getting Started .............................................................................. 11 Unlocking Your Phone ............................................................................. 11 View of Phone........................................................................................... 11 Installing and Removing the Battery ...............................................
Page/Text Message Storage .................................................................... 23 Roaming on to Other Service Providers................................................. 23 (Call History- not functioning)................................................................. 23 Page/Text Messages ................................................................................ 23 Sounds ......................................................................................................
Introduction Highlights Congratulations! Your new mobile phone will change your way of communicating and is a compact, lightweight personal communication system with added features for the person on the go. Our advanced digital mobile communication technology allows you to do the followings 1) Main Chipset: MSM6550, Memory (1024Mbits NAND Flash + 512Mbits LP-SDRAM) 2) Display: Main LCD (320 x 240 pixels, 2.2”, 262K colors TFT) Sub LCD (128 X 160 Pixels,1.3”,64K colors TFT) 3) CMX 4.4.
Safety Instructions WARNING! To reduce the electric shock, do not expose your phone in high humidity areas, such as the bathroom, swimming pool. IMPORTANT! Please read the SAFETY AND GENERAL INFORMATION on page 68 prior to using your phone.
FCC Part 15 Class B Compliance This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that cause undesired operation. Caution For Battery Use z Do not disassemble. z Do not short-circuit. z Do not exposure to high temperature : 60 (140 ) z Do not incinerate.
Caution For Adapter (Charger) Use z Using the wrong battery charger could cause damage to your phone and void your warranty may burst causing injury to person and damage. z The charger or adapter is intended for indoor use only. z The charger or adapter is intended for indoor use only. Do not expose the battery charger or adapter to direct sunlight nor use it in any place of high humidity, such as the bathroom.
Getting Started Unlocking Your Phone If you received your VX9900 in the mail, you may need to unlock it before making calls. 1. Press the END/PWR Switch for 2~3 seconds. 2. Press soft key Unlock. 3. Enter your four-digit lock code. For security purposes, the code will not be visible as you type. Note: If you can’t recall your lock code, try using the last four digits of your Social Security number, the last four digits of your Phone Number or 0000. View of Phone 1.
9. Folder : Lets you answer or end calls. Installing and Removing the Battery To install the battery, insert the bottom of the battery into the opening on the back of the phone. Then, push the battery down until the latch clicks. To remove the battery, press down on the latch and remove the battery from the phone. Turning Your Phone On and Off To turn your phone on, move the On/Off Switch (near the antenna) to the ON position.
Menu Navigation The Mouse Key lets you scroll circularly through menus quickly and easily. As you navigate through a menu, the options are highlighted (Highlighted Test Example ) . Select an option by highlighting it and pressing . The scroll bar at the right of the menu keeps track of your position in the menu at all times. For example, if you want to view your last incoming call: Incoming Log 1. From the Main Menu, select RECENT CALLS and press 2. (It may already be highlighted.) 2.
After a character is entered, the cursor automatically advances to the next space after two seconds. You can also advance the cursor by pressing If you make a mistake, press or entering a character not on the same key. to move the cursor left or [CLR] to erase a character. To clear the entire entry, press and hold [CLR] for two seconds.
Display Icons Display icons are the symbols your phone uses to communicate important information.
Antenna The VX9900 has internal Antenna. !!! Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations. For your phone to operate most efficiently: Do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Signal Strength The quality of each call you make or receive depends on the signal strength on your area.
Using the Travel charger To charge the battery, plug the travel charger into a standard wall outlet and connect it to the phone via the I/O Connector on the bottom of the phone.. The battery Charge Status icon flashes during charging. When the battery is fully charged, the battery icon stops flashing. Using Your Phone Placing a Call When the phone is turned on, check the Signal Strength icon to see of you are in a Service Area or authorized PCS CDMA provider’s service area. 1. Slide up the phone. 2.
When you use your phone on other PCS CDMA networks, your calling experience and call quality will be quite similar to what you experience when making calls within the Network. Although certain calling features may not be available, your phone calls are still private and secure. Correcting Dialing Mistakes To delete one digit at a time, press . To delete all digits, press and hole . Redialing Last Outgoing Number Press and hold [SEND] for 2 seconds.
z Exit – Returns to the Main Menu. z A Phone Book Entry – Displays the Phone Book entry. To dial the entry’s speed-dealing number, press and hold [SEND]. To dial an alternate number, highlight it and press and hold [SEND]. ☞Tip! To speed dial a Phone Book entry from the Main Menu, press and hold the entry’s number. If the entry number is two digits, enter the first digit, then press and hole the second digit. (This feature will not work when the Roam Confirm option is enabled.
Depending on your settings, your phone notifies you of incoming calls in the following ways: z The phone rings or vibrates z The backlight illuminates z The screen displays an incoming call message z The phone number of the caller is displayed of the phone number is available z The caller’s name is displayed if the phone number is in your Phone Book The following options are also displayed. To select an option, highlight it and press [SEND]. z Answer – answers the call.
1. From the Main Menu, select SETTING & TOOLS. 2. And press 9 – 1. (System – Device Info – My Phone Number) Setting the Ring Volume to Vibrate To set the phone to Vibrate Mode, press the down Volume Control key until Ring Volume Vibrate is displayed. The phone will vibrate and – Vibrate On- is displayed above the Main Menu. To set the phone to Vibrate Mode using the Main Menu, see “Adjusting the Volume” .
Getting the Most From Service Retrieving Page/Text Messages To retrieve page/text messages: 1. From the Messaging 2. Highlight Inbox and press [OK]. Highlight the message you want to display and press [OK]. To select an option, highlight it and press [OK]. Text Message options: z Reply z Forward z Lock z Add To Contacts z Erase Inbox z Message Info.
Erasing All Page/Text Messages 1. From the Messages Menu, Press [Options] 2. Highlight Erase All and press [OK]. 3. Highlight Yes and press [OK]. Page/Text Message Storage Your VX9900 can store up to 50 page/text messages. When the message memory is 100% full, a warning message prompts you to erase messages to obtain more memory space. Roaming on to Other Service Providers Roaming occurs when you are in an area serviced by another authorized service provider.
2. Highlight Volume and press [OK]. 3. Highlight Ringer or Key Beep and press [OK]. ☞Tip! You can use the Volume Control keys to adjust the Ring Volume in the Main Menu or the Voice Volume during a call. 4. Highlight High, Medium High, Medium, Medium Low, Low, Vibrate Only, Alarm Only or Sounds Off (for Ringer only) and press [OK]. Note: When the phone is in Vibrate OMode and attached to and accessory (Desktop Charger, HandsFree Car Kit, etc.
To select a Ring Type for Messages: 1. From the SETTINGS & TOOLS menu, highlight Sounds Settings and press [OK]. 2. Highlight Aert Sounds and press [OK]. 3. Highlight PIX , TXT , Voice, Email , Page and press [OK]. 4. Highlight a Ring Type and press [OK]. Service Alert Notification To enable of disable alert sounds: 1. From the SETTINGS & TOOLS menu, highlight Sounds Settings and press [OK]. 2. Highlight Service Alerts and press [OK]. 3. Select an alert by highlighting it and pressing [OK].
Display Menu Security Accessing the Security Menu You must enter your lock code to view the Security menu. If you forget your lock code, try using the last four digits of your Social Security number, the last four digits of your Phone Number or 0000. Security Menu To access the Security menu: 1. From the SETTING & TOOLS, select Phone Settings and press Security. 2. Enter your lock code.
2. Enter your lock code. Changing the Lock Code To change your lock code: 1. From the Security menu, highlight Change Code and press [OK]. 2. Enter your new lock code. 3. Reenter your new lock code. Selecting Answer Option You can select different answering options. To answer calls automatically or by pressing any key: 1. From the SETTING & TOOLS, select Call Settings and press Answer Options. To select and option, highlight it and press [OK].
2. Highlight On and press [OK]. Safety Guideline Provided herein is the TIA Safety Information for Wireless Handheld phones. Inclusion of this text in the terminal unit’s owner’s manual is required for CTIA Certification.
TIA Safety Information Provided herein is the complete TIA Safety Information for Wireless Handheld phones. Inclusion of the text covering Pacemakers, Hearing Aids, and Other Medical Devices is required in the owner’s manual for CTIA Certification. Use of the remaining TIA language is encouraged when appropriate. EXPOSURE TO RADIO FREQUENCY SIGNALS Your wireless handheld portable telephone is a low power radio transmitter and receiver.
pointed up and over your shoulder. TIPS ON EFFICIENT OPERATION: • For your phone to operate most efficiently: • Extend your antenna fully. Do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.
Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider [or call the customer service line to discuss alternatives.] Optional for each phone manufacturer. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.
may include: fueling areas (such as gasoline stations); below deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles (such as grain, dust, or metal powders); and any other area where you would normally be advised to turn off your vehicle engine. For Vehicles Equipped with an Air Bag An air bag inflates with great force.
FDA Consumer Update The U.S. Food and Drug Administration’s Center for Devices and Radiological Health Consumer Update on Mobile Phones 1. Do wireless phones pose a health hazard? The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used.
Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following: • Support needed research into possible biological effects of RF of the type emitted by wireless phones; • Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and • Cooperate in providing users of wireless phones with the best possible information on possible effects of
get from wireless phones. Base stations are thus not the subject of the safety questions discussed in this document. 3. What kinds of phones are the subject of this update? The term “wireless phone” refers here to hand-held wireless phones with built-in antennas, often called “cell,” “mobile,” or “PCS” phones. These types of wireless phones can expose the user to measurable radiofrequency energy (RF) because of the short distance between the phone and the user’s head.
Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phone RF exposures.
FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues.
(http://www.fcc.gov/oet/rfsafety) gives directions for locating the FCC identification number on your phone so you can find your phone’s RF exposure level in the online listing. 8.
the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use. 10.
groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE).
Consumer Information on SAR (Specific Absorption Rate) THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications ‘Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
Additional information about Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com. ___________________________________________________________________________________ * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue.
FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless Devices On July 10, 2003, the U.S. Federal Communications Commission (FCC) Report and Order in WT Docket 01-309 modified the exception of wireless phones under the Hearing Aid Compatibility Act of 1988 (HAC Act) to require digital wireless phones be compatible with hearing-aids. The intent of the HAC Act is to ensure reasonable access to telecommunications services for persons with hearing disabilities.
