. Module : WB1NP7 [Top] [Bottom] This WB1NP7 Module can be easily designed into any embedded system for Bluetooth Spec 4.2 feature. It is based on Airoha’s AB1520 with specific interface design to meet LG Electronics’s needs. 2. Module Specification Chips AB1520 Bluetooth Spec Bluetooth 4.2 Frequency Band 2402 ~ 2480 MHz Tx Power 0.25 ~ 2.5mW (Bluetooth Power Class I) Rx Sensitivity < -70dBm (BER 0.1%) Distance < 100m (Open Space) Power Voltage 3.7V Dimension 20mmⅹ26mm ⅹ3.
4.
6 PIO3 I/O 7 UART_RX I 8 UART_TX O 9 PIO11 I/O AIO and I2S_SDI, Alternative function PIO[11] 10 PIO6 I/O I2S_MCLK, Alternative function PIO[6] 11 PIO7 I/O I2S_SCK, Alternative function PIO[7] 12 PIO14 I/O I2S_WS, Alternative function PIO[14] 13 PIO15 I/O I2S_SDO, Alternative function PIO[15] 14 PIO16 I/O I2S_MCLK2, Alternative function PIO[16] 15 PIO17 I/O I2S_SCK2, Alternative function PIO[17] 16 GND I 17 SDA I/O I2C DATA LINE 18 SCL I/O I2C CLOCK LINE 19 LE
34 MIC1_N A 35 NC - 36 NC - 37 LINE_IN_L A LINE IN L-path 38 LINE_IN_R A LINE IN R-path 39 SPK_LP A SPEAKER OUTPUT LP 40 LRVCM A SPEAKER OUTPUT LRVCM 41 SPK_RP A SPEAKER OUTPUT LP 42 GND I GND CONNECTION FOR INTERNAL DIGITAL CIRCUITTRY AND PADS MICROPHONE 1 N-path
. Mechanical Dimension TOP View Mark Dimension Mark Dimension Mark Dimension Mark Dimension A 26.0±0.3 D 3.01±0.05 G 0.8±0.2 J 1±0.1 B 20.0±0.5 E 1.27±0.2 H 0.5±0.2 K 3±0.3 C 6.0±0.3 F 1.20±0.3 I 0.4±0.1 L 1.65±0.
. Electrical Characteristics Conditions : BAT_P = 4.2V, Ta = 25 ℃, unless otherwise noted. Absolute Maximum Ratings Parameter Min Max Unit Power Supply Voltage : BAT_P -0.3V 4.4V DCV I/O Supply Voltage : VCCIO -0.3V 3.6V DCV -40 85 ℃ Min Max Unit 3.34V 4.
Parameter Condition Frequency Range Min Type 2402 Max 2480 Unit MHz Transmitter Performance Parameter Condition Min Type Max Unit Transmit Power -6 0 7 dBm Power density - - 20 dBm 1000 KHz 20dB bandwidth ±2% - - -20 dBm ±3% - - -40 dBm ±4% - - -40 dBm 30MHz ~ 1GHz - - -36 dBm 1GHz ~ 12.75GHz - - -30 dBm 1.8GHz ~ 1.9GHz - - -47 dBm 5.1GHz ~ 5.
FCC WARNING STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment.
IC WARNING STATEMENT This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions : (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
