User manual

How to Install TV Legs
Accessory:Legs 4EA(Front 2EA &
Rear 2EA)
1. Lay the TV set down on a soft cloth as shown
in the figure.
2. Fully insert the two supporting legs marked
with “FRONT” into the holes at the bottom of
the front cabinet,and secure them as shown
in the figure.
3. Fully insert the two supporting legs marked
whth “REAR” into the holes at the bottom of
the rear cabinet and secure them,as shown in
the figure.
4. Lift up the legs of the TV set as shown in the
figure.
5. To avoid any damage caused by the TV set
falling over by accident,please affix the sup
plied suspension loop to a proper position on
the wall behind the TV set, and secure the
loop with screws(not supplied),as shown in
the figure.Then, use the supplied rope to con
nect the TV set and the suspension loop.The
rope length should be properly adjusted to fit
the distance between the TV and the wall.
Screw hole