User guide

ManualsBrandsLG Electronics ManualsLCD TV15LS1R

ENGLISH

PC Setup (15LS1R

)

You can adjust auto configure, manual configure and reset as you

prefer.

1. Press the INPUT button and then

button to select the

RGB-PC.

2. Press the MENU button and then

button to select the

SCREEN menu.

3. Press the

button and then

button to select the desired

screen function.

4. Make appropriate adjustments.

Auto configure

This function is for the automatic adjustment of the screen posi-

tion, clock and phase. The displayed image will disappear for a

few seconds while the Auto-configuration is in progress.

Manual configure

This function is for the manual adjustment of the screen posi-

tion, clock and phase. Press the

button to make appro-

priate adjustments.

• H-Position / V-Position

This function is to adjust picture to left/right and up/down as you

prefer.

• Clock

This function is to minimize any vertical bars or stripes visible on

the screen background. And the horizontal screen size will also

change.

• Phase

This function allows you to remove any horizontal noise and

clear or sharpen the image of characters.

Reset

This function allows you to return to the good picture reproduc-

tion programmed at the factory and cannot be changed.

Note : Some signal from some graphics boards may not func-

tion properly. If the results are unsatisfactory, adjust your mon-

itor’s position, clock and phase manually.

5. Press the OK button to store it for the PC monitor picture.

SSM PSM

VOL

INPUT

Connection of PC

Auto configure

Manual configure

Reset

SCREEN

To start

Auto configure

Manual configure

Reset