LCD Color Television OWNER’S MANUAL MODEL: 17LX1R Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. Internet Home Page : http://www.lge.com http://www.lg.
Warning Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Safety Instructions Safety Instructions WARNING : To reduce the risk of fire or electric shock, DO NOT expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION : These servicing instructions are for use by qualified service personnel only.
Safety Instructions Safety Instructions continued 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel.
Contents Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3~4 Introduction Controls & Connection Options . . . . . . . . . . . . . .6 Remote Control Key Functions . . . . . . . . . . . . . .7 Installation Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Kensington Security System . . . . . . . . . . . . . . . .8 Installation Instruction Connection of TV . . . . . .
Introduction Introduction Controls & Connection Options CH Channel Buttons VOL Volume Buttons ENTER Enter Button MENU Menu Button TV VIDEO TV·Video Button /I ON/OFF On/Off Button Remote Control Sensor Power/Standby Indicator VIDEO Illuminates red in standby mode, illuminates green when the set is switched on.
Introduction Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the TV. MUTE Switches the sound on or off. TV/VIDEO Selects: TV, Video1, Video2, S-Video, Component or PC mode. MULTIMEDIA Selects: TV, Component or PC mode. MUTE POWER TV/VIDEO MULTIMEDIA MTS EXIT FCR MENU FCR (Refer to p.16) POWER MTS (Refer to p.
Introduction Installation Accessories MUTE POWER TV/VIDEO MULTIMEDIA MTS FCR EXIT MENU CH ENTER VOL VOL CH 1 2 4 5 7 8 AUDIO 3 6 9 VIDEO 0 CC ARC 1.5V 1.5V Owner’s Manual PC Signal Cable AAA Batteries PC Sound Cable FLASHBK SLEEP Power Cord Tie Holder Remote Control Polishing cloth - Arrange the wires with the tie Holder. Kensington Security System - The TV is equipped with a Kensington Security System connector on the back panel.
Installation Installation Instruction Connection of TV 1 Pull the back cover backside while pushing the two tabs and then lift it up. 2 Connect the antenna cable to the socket marked +75 Ω on the back. For the best reception an outdoor antenna should be used. 3 To connect an additional equipment, see the External Equipment Connections section. 4 Connect the power cord. 5 Close the back cover. 1 2 ~ 4 5 Cable Holders - Thread, then pull the cables through the hole on the TV stand.
Installation External Equipment Connections Antenna Connection - For optimum picture quality, adjust antenna direction. Connecting to an Inside Antenna Setup - Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below. (Use the correct type of antenna cable for the type of wall antenna jack.) Turn clockwise to tighten.
Installation External Equipment Connections Continued VCR Setup - In Video mode, TV automatically reverts to TV mode if the fcr button or flashbk buttons are pressed. Connection 1 Set VCR switch to 3 or 4 and then tune TV to the same channel number. Connection 2 1. Connect the audio/video output jacks on VCR to the corresponding input jacks on the TV. When connecting the TV to a VCR, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). 2.
Installation DVD Setup Connections 1. Connect the DVD video outputs to the COMPONENT (Y, PB, PR) jacks and connect the DVD audio outputs to the AUDIO jacks. 2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure. NOTE: If your DVD player does not have component video output, use S-Video. Viewing Setup 1. Turn on the DVD player, insert a DVD. 2.
Installation PC Setup - After setup, be sure to select PC source on TV. Connections 1. Set the monitor output resolution on the PC before connecting to the TV. 2. Connect the TV to the PC with the PC cable. 3. Connect the PC audio output to the TV's PC SOUND input. Viewing Setup 1. Turn on the PC. 2. Use the TV/VIDEO or MULTIMEDIA button on the remote control to select PC.
Operation Operation PC Menu Options - After setup, be sure to select PC source to see the PC image on TV screen. PC H-Position V-Position Clock Phase Auto Configure Reset D E FG 85 OK MENU 1. Press the MENU button and then use D 2. Press the 3. Use the F G button and then use / G button D /E /E button to select the PC menu. button to select desired item. to make appropriate adjustments. • H-position/V-position Adjusts picture left/right and up/down.
Operation TV Operation Overview 1. First, make all equipment connections. Plug the AC Adapter into the TV, then plug the AC Adapter into a power outlet. At this time, the TV is switched to standby mode. • In standby mode, press the POWER, CH (D,E), TV/VIDEO, MULTIMEDIA or NUMBER button on the remote control or ON/OFF, CH (D,E), TV/VIDEO located on the TV to turn the TV on. 2. Select the viewing source by pressing TV/VIDEO or MULTIMEDIA repeatedly.
Operation Channel Menu Options Memorizing the Channels with EZ Scan - For Auto program to work, the programming source must be connected to the TV and the TV must be receiving programming signals either over-the-air or from a cable-type service provider. Channel EZ Scan Manual prog. Favorite ch. 1. Press the MENU button and then use D / E button to select the Channel menu. 2. Press the G button and then use button to select EZ Scan. D /E To start 3. Press the G button to begin the channel search.
Operation Picture Menu Options EZ Video Video - This function adjusts the TV for the best picture appearance. 1. Press the VIDEO button repeatedly to select the picture appearance setup option as shown below. Clear Optimum Soft User • You can also adjust EZ Video in the Picture menu. • Clear, Optimum and Soft are preset for good picture quality at the factory and cannot be changed.
Operation Sound Menu Options EZ Audio - This function lets you enjoy the best sound without any special adjustment because the TV selects the appropriate sound option based on the program content. 1. Use the AUDIO button to select the appropriate sound setup as shown below. Flat Music Movie Sports User • You can also adjust EZ Audio in the Sound menu. Equalizer Adjustments 1. Press the MENU button and then use D /E but- ton to select the Sound menu. 2.
Operation T imer Menu Options Auto Clock Setup - The time is set automatically through from a PBS broadcast signal. - The PBS channel signal includes information for the correct time and daylight saving time. Timer Clock Off timer On timer Auto off D FG E G Auto Manual Auto Clock Time zone Auto PBS Ch. TV 1 D.S.T. Auto FG OK MENU 1. Press the MENU button and then use D /E Move D E Adjust  Exit button to select the Timer menu. 2.
Operation On/Off On/Off Timer Setup - Timer function operates only if current time is set. Off-Timer function overrides On-Timer function if they are set to the same time. The TV must be in standby mode for the On-Timer to work. If you don’t press any button within 2 hours after turning on the TV with the On-Timer function, the TV will automatically revert to standby mode. 1. Press the MENU button and then use menu. D / E button to select the Timer G button and then use 3.
Operation Special Menu Options Closed Captions Closed captioning is a process which converts the audio portion of a television program into written words which then appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs. Using Closed Captions Captions are the subtitles of the dialogue and narration of television programs. For prerecorded programs, program dialogue can be arranged into captions in advance.
Operation Caption/Text Caption/Text 1. Press the MENU button and then use D / E button to select the Special menu. 2. Press the G button and then use D / E button to select Caption / Text. 3. Press the G button and then use D / E button to select caption: CC1, CC2, CC3, CC4, Text1, Text2, Text3, or Text4. • CAPTION The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired.
Operation Lock Options Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcast station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. It is also possible to block all program viewing for a time period. To use this function, the following must be set : 1.
Operation Lock Menu Setup Special Language Caption / Text Captions Key lock Parental Logo D FG E Parental Lock Set password MPAA Age block Content block Aux. block Canadian To set D FG E OK MENU 1. Press the MENU button and then use D /E 2. Press the G button and then use Then, press the G button. button to select Parental. D /E On Off OK MENU button to select the Special menu. • If Lock is already set, enter the password requested. • The TV is set with the initial password “0-0-0-0”. 2.
Maintenance & Product Specification Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent.
Troubleshooting Checklist Troubleshooting Checklist The operation does not work normally. The remote control doesn’t work • Check to see if there is any object between the product and the remote control causing obstruction. • Are batteries installed with correct polarity (+ to +, - to -)? • Correct remote operating mode set: TV, VCR etc.? • Install new batteries. Power is suddenly turned off • Is the sleep timer set? • Check the power control settings.
Troubleshooting Checklist The audio function does not work. Picture OK & No sound No output from one of the speakers Unusual sound from inside the product • Press the VOL (or Volume) button. • Sound muted? Press MUTE button. • Try another channel. The problem may be with the broadcast. • Are the audio cables installed properly? • Adjust Balance in menu option.