User manual
122
PICTURE CONTROL
PICTURE CONTROL
•
SSttaannddaarrdd
: Mode to reproduce original colour according to the standard of
input signal independent of the display characteristics.
•
WWiiddee::
Mode to use and set the rich colour area of the display.
■
Maximize the utilization for colour area that can be expressed.
■
Shows clearer and distinctive yet natural corners of the video.
■
This function is enabled in “
PPiiccttuurree MMooddee
-
CCiinneemmaa
,
EExxppeerrtt
.”(LCD TV
/LED LCD
TV
only)
*This feature is not available for all models.
■
This is the function to express richer colour.
■
This function is enabled in "Picture mode - Cinema, Expert" when xvYCC signal is
inputted through HDMI
*This feature is not available for all models.
■
As the technology to reduce the power consumption while keeping the same
brightness, this has the effect of reducing power consumption, improvement in
contrast.
Colour Gamut
(Wide/Standard)
Edge Enhancer(LCD TV
/LED
LCD TV
:Off/Low/High
Plasma TV:On/Off
)
xvYCC
(Auto/off/on)
OPC
(On/Off)
Colour Standard
(SD/HD)
■
Converts the colour of a different video to HD colour. This function is set for SD
video (BT-601) and HD video (BT-709) colour format.
Expert Pattern
(Off/Expert1/Expert2)
Colour Filter
(Off/Red/Green/Blue)
Colour Temperature
[Expert Control](LCD
TV
/LED LCD TV
),
White Balance(
Plasma TV)
(Medium/Warm/Cool)
Colour Management
System
■
As the tool used by the experts to make adjustments by using the test patterns, this
does not affect other colours but can be used to selectively adjust the 6 colour
areas (Red/Green/Blue/Cyan/Magenta/Yellow).
Colour difference may not be distinctive even when you make the adjustments for
the general video.
■
Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
• Red/Green/Blue/Yellow/Cyan/Magenta Colour : The adjustment range
is -30 to +30.
•
Red/Green/Blue/Yellow/Cyan/Magenta Tint : The adjustment range is
-30 to +30.
■
This feature is disable in RGB-PC and HDMI (PC) mode.
■
This is the function to adjust the overall colour of the screen to the feeling you want.
a. •
Method : 2 Points
• Pattern: Inner, Outer
• Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 to +50.
b.
• Method : 10 point IRE(LCD TV
/LED LCD TV
), 20 Point IRE(Plasma TV)
• Pattern: Inner / Outer
• IRE (Institute of Radio Engineers) is the unit to display the size of the video sig-
nal and can be set among 10, 20, 30 to 100(LCD TV
/LED LCD TV
), 5, 10, 15 to
100(Plasma TV). You can adjust Red, Green or Blue according to each setting.
•
Luminance: This function displays calculated luminance value for 2.2 gamma. You can input
luminance value you want at 100 IRE, than the target luminance value for 2.2 gamma is dis-
played at every 10 steps from 10 IRE to 90 IRE.(LCD TV/LED LCD TV only)
•
Red/Green/Blue: The adjustment range is -50 to +50.
A
This is the pattern necessary for expert adjustment.
A
This function is enabled in "Picture Mode - Expert" when you watch DTV.
■
This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.