LCD TV OWNER’S MANUAL MODELS: 15LS1R * 20LS2R * 15LC1R * 20LS1R * 23LS2R * 20LC1R * Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
Contents 2 Installation 3 Location and function of controls Remote control handset Battery installation / Front / Rear 8 Basic operation On and off On-Screen Menu Language/Country Selection 14 On screen menus Menu selection / Programme selection Volume adjustment 15 Setting up TV stations Auto programme tuning Manual programme tuning Programme edit / Favourite programme Calling the programme table 16 Picture adjustment PSM (Picture Status Memory) Picture adjustment CSM (Colour Status Memory) XD
ENGLISH Installation Stand Installation 1. Assemble parts of stand body with cover base of the stand. Insert stand body into a cover base until clicking sound. 2. Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 3. Place the product stand on the product as shown. Note: Here shown may be somewhat different from your set. stand body cover base Detaching stand 1. 2. 3. 4. 5.
Installation Unfolding the stand base 1. Place the set with its front facing downward on a cushion or soft cloth. 2. Hold down the release button inside the stand and strongly pull out the stand with your two hands. Note: Here shown may be somewhat different from your set. The stand won't move if you don't press release button. Connection of TV 1. Connect the aerial cable to the socket marked ANTENNA IN on the back. For the best reception an outdoor aerial should be used. 2.
ENGLISH Installation How to remove the Cable management First, press the cable management. Hold the Cable management with both hands and pull it upward. Note: Do not hold the CABLE MANAGEMENT when moving the product. (If the product is dropped,you may be injured or the product may be broken.
Installation Positioning your display Adjust the position of the panel in various ways for maximum comfort. • Tilt range 10~12 0 3 Location Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover.
ENGLISH Installation Kensington Security System - The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. - For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact http://www.kensington.com, the internet homepage of the Kensington company.
Location and function of controls 9 POWER TV INPUT 1 10 1 2 3 2 4 5 6 7 8 9 LIST 0 Q.VIEW MUTE 14 5 TEXT Q.
ENGLISH Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the top panel of the set. Only the remote control handset supplied will operate this set. Remote control handset Before you use the remote control handset, please install the batteries. See the next page. 1. POWER switches the set on from standby or off to standby. 2. NUMBER BUTTONS switches the set on from standby and selects a programme.
Location and function of controls Front If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth. Top panel /I INPUT MENU 1 2 3 15LS1R*/ 20LS1R* OK 4 VOL PR 5 6 20LS2R*/ 23LS2R* 7 7 8 8 15LC1R*/ 20LC1R* Top panel PR VOL OK MENU INPUT /I 6 5 4 3 2 1 7 8 1. ON/OFF (r / I) switches the set on from standby or off to standby. 2. INPUT selects the remote operating mode. switches the set on from standby. 3.
ENGLISH Location and function of controls Rear 15LS1R* ANTENNA INPUT PC SOUND INPUT PC INPUT JACK RGB(PC/DTV) IN ANTENNA IN AUDIO (RGB) IN AV 1 VIDEO S-VIDEO H/P AV IN 2 AC INPUT EURO SCART SOCKET S-VIDEO INPUT AUDIO/VIDEO INPUT HEADPHONE JACK FOR SERVICE ANTENNA INPUT JACK 20LS1R* SERVICE ONLY ANTENNA IN AV 1 VIDEO S-VIDEO H/P AV IN 2 AC INPUT EURO SCART SOCKET AUDIO/VIDEO INPUT S-VIDEO INPUT HEADPHONE JACK 11
Location and function of controls Rear 20LS2R*/ 23LS2R* HDMI/DVI INPUT AC INPUT HDMI/DVI IN PC INPUT JACK ANTENNA PC SOUND INPUT INPUT RGB (PC/DTV) IN AUDIO (RGB/DVI) IN HEADPHONE JACK ANTENNA IN AV IN 2 AUDIO VIDEO L AV 1 Y S-VIDEO R PR PB H/P L R VIDEO AUDIO COMPONENT IN EURO SCART SOCKET AUDIO/VIDEO COMPONENT INPUT INPUT 20LS2RC AC INPUT S-VIDEO INPUT RS-232C (SERVICE ONLY) PC INPUT PC SOUND ANTENNA HDMI/DVI JACK INPUT INPUT INPUT RS-232C (SERVICE ONLY) HDMI/DVI IN RGB (PC/DTV)
ENGLISH Location and function of controls Rear 15LC1R* ANTENNA INPUT PC SOUND INPUT PC INPUT JACK RGB(PC/DTV) IN ANTENNA IN AUDIO (RGB) IN AV 1 VIDEO S-VIDEO H/P AV IN 2 AC INPUT EURO SCART SOCKET S-VIDEO INPUT AUDIO/VIDEO INPUT HEADPHONE JACK FOR SERVICE ANTENNA INPUT JACK 20LC1R* SERVICE ONLY ANTENNA IN AV 1 VIDEO S-VIDEO H/P AV IN 2 AC INPUT EURO SCART SOCKET AUDIO/VIDEO INPUT S-VIDEO INPUT HEADPHONE JACK 13
Basic operation On and off POWER TV INPUT 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW PSM MUTE 1. Press the POWER, D / E, TV, INPUT or NUMBER buttons to switch it on fully. 2. Press the POWER button. The set reverts to standby mode. 3. Pull out mains plugs to switch the set off. SSM TEXT PR Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains plug is replaced in the mains power socket.
ENGLISH On screen menus Menu selection PSM MUTE TEXT OK VOL VOL I/II NU ME 1. Press the MENU button and then D / E button to display each menu. 2. Press the G button and then D / E button to select a menu item. 3. Change the setting of an item in the sub or pull-down menu with F / G button. You can move to the higher level menu by pressing the OK button and to move to the lower level menu by pressing the MENU button. Note : a. The SCREEN (20LS1R*/20LC1R*) menu is not displayed. b.
Setting up TV stations Station Auto programme Manual programme Programme edit Favourite programme Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the D / E or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. Auto programme tuning DE FG All stations that can be received are stored by this method.
ENGLISH Setting up TV stations Manual programme tuning Station Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. 1. Press the MENU button and then D / E button to select the Station menu. 2. Press the G button and then D / E button to select Manual programme. 3. Press the G button and then D / E button to select Storage.
Setting up TV stations Station Auto programme Manual programme Programme edit Favourite programme DE OK MENU FG 7 8 9 LIST 0 Q.VIEW PSM MUTE SSM TEXT PR Assigning a station name 1. Repeat the ‘Manual programme tuning’ steps 1 to 2. 2. Press the G button and then D / E button to select Name. 3. Press the G button and then use the D / E. You can use a blank, +, -, the number 0 to 9 and the alphabet A to Z. It can be saved 5 digits for name.
ENGLISH Setting up TV stations Programme edit Station This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number. 1. Press the MENU button and then D / E button to select the Station menu. 2. Press the G button and then D / E button to select Programme edit. 3. Press the G button to display the Programme edit menu.
Setting up TV stations Station Auto programme Manual programme Programme edit Favourite programme Favourite programme This function lets you select your favourite programmes directly. 1. Press the MENU button and then D / E button to select the Station menu. 2. Press the G button and then programme. DE OK MENU FG 7 8 LIST Q.
ENGLISH Picture adjustment PSM (Picture Status Memory) Picture 1. Press the MENU button and then D / E button to select the Picture menu. 2. Press the G button and then D / E button to select PSM. 3. Press the G button and then D / E button to select a picture setting on the PSM menu. 4. Press the OK button. PSM CSM XD Cinema Reset DE FG OK MENU Picture PSM CSM XD Cinema Reset Dynamic Standard Mild Game User G 7 8 9 LIST 0 Q.VIEW PSM MUTE SSM TEXT PR OK FG VOL OK MENU NU ME 5.
Picture adjustment CSM (Colour Status Memory) Picture PSM CSM XD Cinema Reset DE Selecting a factory setting colour set. 1. Press the MENU button and then D / E button to select the Picture menu. 2. Press the G button and then D / E button to select CSM. OK MENU FG LIST Q.VIEW 0 PSM MUTE Picture PSM CSM XD Cinema Reset SSM DE OK VOL I/II NU ME PR EE * P HOLD SIZE MIX TIME MENU PR OK VOL PR 22 FG OK MENU 3.
ENGLISH Picture adjustment XD function Picture XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. 1. Press the MENU button and then D / E button to select the Picture menu. 2. Press the G button and then D / E button to select XD. 3. Press the G button and then D / E button to select Auto or PSM CSM XD Cinema Reset DE FG OK MENU Manual. 7 8 9 LIST 0 Q.
Picture adjustment Cinema Picture PSM CSM XD Cinema Reset DE Set up the TV for the best picture appearance for viewing movies. 1. Press the MENU button and then D / E button to select the Picture menu. 2. Press the G button and then D / E button to select Cinema. 3. Press the OK MENU FG G button and then D /E button to select On or Off. Picture 7 8 9 LIST 0 Q.
ENGLISH Sound adjustment SSM (Sound Status Memory) Sound You can select your preferred sound setting; Flat, Music, Movie or Sports and you can also adjust the sound frequency of the equalizer. 1. Press the MENU button and then D / E button to select the Sound menu. SSM AVL Balance 0 Sound SSM AVL Balance G 0 Flat Music Movie Sports User DE FG OK MENU 7 8 9 LIST 0 Q.VIEW PSM FG OK MENU MUTE TEXT OK VOL VOL NU ME 2. Press the G button and then D / E button to select SSM. 3.
Sound adjustment 4 5 6 7 8 9 LIST Q.VIEW 0 PSM MUTE Stereo/Dual reception SSM TEXT PR OK VOL VOL I/II NU ME PR SL EE * P HOLD SIZE MIX TIME REVEAL INDEX MODE UPDATE ? i When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
ENGLISH TIME Menu Clock Time You must set the time correctly before using on/off time function. 1. Press the MENU button and then D / E button to select the Time menu. 2. Press the G button and then D / E button to select Clock. Time Clock Off time On time Auto sleep DE Clock Off time On time Auto sleep G FG OK MENU --:-7 8 9 LIST 0 Q.VIEW PSM MUTE FG TEXT OK MENU On/Off time OK VOL VOL NU ME 3. Press the G button and then D / E button to adjust the hour. 4.
TIME Menu Auto sleep Time Clock Off time On time Auto sleep DE If you select On on the Auto sleep menu, the set will automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting. 1. Press the MENU button and then D / E button to select the Time menu. 2. Press the G button and then D / E button to select Auto sleep. 3. Press the G button and then D / E button to select On or Off. OK MENU FG 7 8 9 LIST 0 Q.
ENGLISH Other functions Child lock Special The TV can be set so that the remote control handset is needed to control it. This feature can be used to prevent unauthorized viewing. 1. Press the MENU button and then D / E button to select the Special menu. 2. Press the G button and then D / E button to select Child lock. 3. Press the G button and then D / E button to select On or Off on the Child lock menu. Language Country Child lock XD Demo DE FG 7 8 9 LIST 0 Q.
Other functions Special XD Demo Language Country Child lock XD Demo Use it to see the difference between XD Demo on and XD Demo off. DE OK MENU FG 7 8 LIST Special 9 Language Country Child lock XD Demo Q.VIEW 0 PSM MUTE 1. Press the MENU button and then D / E button to select the Special menu. 2. Press the G button and then D / E button to select XD Demo. 3. Press the G button to begin XD Demo. SSM G TEXT PR To start OK VOL VOL I/II NU ME DE FG OK MENU PR SL EE 4.
ENGLISH Other functions TV, AV and PC modes POWER TV INPUT 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW Press the INPUT button and then D / E button to select desired mode. Inputs can be set for TV, AV or PC mode. AV mode is used when a video cassette recorder (VCR), or other equipment is connected to the set. Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the ‘Connection of external equipment’ section.
Teletext - This feature is not available in all countries. 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW PSM MUTE SSM TEXT PR OK VOL VOL I/II NU ME PR SL EE * P HOLD SIZE MIX TIME Teletext (or TOP text) is an optional function, therefore only a set with the teletext system can receive the teletext broadcast. Teletext is a free service broadcast by most TV stations which gives upto-the-minute information on news, weather, television programmes, share prices and many other topics.
ENGLISH Teletext TOP text The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. Block / group / page selection 1. With the blue button you can progress from block to block. 2. Use the yellow button to proceed to the next group with automatic overflow to the next block. 3. With the green button you can proceed to the next existing page with automatic overflow to the next group.
Connection of external equipment You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below. Note: Here shown may be somewhat different from your set. Aerial socket ANTENNA IN 1. Connect the RF out socket of the VCR to the aerial socket of the set. 2. Connect the aerial cable to the RF aerial in socket of the VCR. 3. Store the VCR channel on a desired programme number using the ‘Manual programme tuning’ section. 4.
ENGLISH Connection of external equipment S-Video/Audio in sockets (S-Video) When connecting an S-VIDEO VCR to the S-VIDEO socket, the picture quality will be further improved. VIDEO S-VIDEO AV IN 2 1. Connect the S-Video socket of the VCR to the S-VIDEO socket of the set. 2. Connect the audio cable from the S-VIDEO VCR to the AUDIO sockets of the set. 3. Press the INPUT button to select AV 2. 4. Press the PLAY button on the VCR. The VCR playback picture appears on the screen.
Connection of external equipment DTV in sockets RGB(PC/DTV) IN AUDIO (RGB) IN RGB in socket (15LS1R*/15LC1R*/ 20LS2R*/ 23LS2R*) 1. Connect the SET TOP with the D-Sub output socket to RGB (PC/DTV) IN socket on the set and audio cable of the SET TOP to the AUDIO (RGB) IN (15LS1R*/15LC1R*) or AUDIO (RGB/DVI) IN (20LS2R*/ 23LS2R*). 2. Press the INPUT button to select RGB (or RGB [DTV]) (576p/480p) - 15LS1R*/15LC1R*, (480p/576p/720p/1080i) 20LS2R*/ 23LS2R*.
ENGLISH Connection of PC PC in socket RGB(PC/DTV) IN RGB in socket (15LS1R*/15LC1R*/ 20LS2R*/ 23LS2R*) AUDIO (RGB) IN 1. Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the PC input socket of the set. 2. Connect the audio cable from the PC to the AUDIO (RGB) IN (15LS1R*/15LC1R*) or AUDIO (RGB/DVI) IN (20LS2R*/ 23LS2R*) sockets of the set. 3. Press the INPUT button to select RGB (or RGB [PC]). 4. Switch on the PC, and the PC screen appears on the set.
Connection of PC PC Setup Screen Auto config. Manual config. XGA Mode You can adjust auto configure, manual configure and reset as you prefer. ARC Reset DE OK MENU FG POWER 1. Press the INPUT button and then D / E button to select the RGB [PC]. 2. Press the MENU button and then D / E button to select the Screen menu. 3. Press the G button and then D / E button to select the desired screen function. TV INPUT 1 2 3 Screen 4 5 6 7 8 9 Auto config. Manual config. XGA Mode LIST 0 Q.
ENGLISH Connection of PC Selecting wide XGA mode Screen To see a normal picture, match the resolution of RGB mode and selection of XGA mode. 1. Press the MENU button and then D / E button to select the Screen menu. 2. Press the G button and then D / E button to select XGA mode. 3. Press the G button and then D / E button to select the desired XGA resolution. Auto config. Manual config. XGA Mode ARC Reset DE FG 7 8 9 LIST 0 Q.VIEW Screen PSM Auto config. Manual config.
Picture format 4 5 6 7 8 9 LIST Q.VIEW 0 PSM MUTE SSM TEXT PR OK VOL VOL I/II NU ME PR SL EE Spectacle When your TV receives the wide screen signal, it will lead you to adjust the picture horizontally, in a nonlinear proportion, to fill the entire screen. C AR P HOLD SIZE MIX TIME REVEAL INDEX MODE UPDATE ? You can watch TV in various picture formats; Spectacle, Original, 4:3, 16:9, 14:9, Zoom1, Zoom2. Repeatedly press the ARC button to select your desired picture format.
ENGLISH Troubleshooting Checklist The operation does not work normally. The remote control doesn’t work • Check to see if there is any object between the product and the remote control causing obstruction. • Are batteries installed with correct polarity (+ to +, - to -)? • Correct remote operating mode set: TV, VCR etc.? • Install new batteries. Power is suddenly turned off • Is the sleep timer set? • Check the power control settings.
Troubleshooting Checklist The audio function does not work. Picture OK & No sound No output from one of the speakers Unusual sound from inside the product • Press the VOL (or Volume) button. • Sound muted? Press MUTE button. • Try another channel. The problem may be with the broadcast. • Are the audio cables installed properly? • Adjust Balance in menu option.
ENGLISH Product Specifications Power Requirement/ Power Consumption 15LS1R* 20LS1R* 20LS2R* 23LS2R* : AC100-240V~ : AC100-240V~ : AC100-240V~ : AC100-240V~ Dimensions (Width x Depth x Height) 15LS1R* : 463.3mm x 166.3mm x 353.5mm 18.2inches x 6.5inches x 13.9inches : 573.2mm x 189.7mm x 435.5mm 22.6inches x 7.5inches x 17.1inches : 518.9mm x 177.7mm x 415.5mm 20.4inches x 7.0inches x 16.4inches : 589.2mm x 189.7mm x 464.9mm 24.0inches x 7.5inches x 18.