User manual

22
Connection of external equipment
You can connect additional equipment, such as VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
Aerial socket
1. Connect the RF out socket of the VCR to the aerial socket on the
back of the set.
2. Connect the aerial cable to the RF aerial in socket of the VCR.
3. Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
4. Select the programme number where the VCR channel is stored.
5. Press the PLAY button on the VCR.
Audio Video in/out sockets (option)
1. Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets of
the set.
2. If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select AV.
3. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You can also record programmes received by the TV on
video tape via audio/video out sockets.
Note:a. If audio input is only L or R select L+L or R+R through
I/II/ key on remote control.
b. Front AV and rear AV not to be used simultaneously.
c. If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO (L/MONO) socket onthe back of the set.
Euro scart socket (option)
1. Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
2. Press the PLAY button on the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket, the set will switch to AV mode automatically. But if you
want to keep on watching TV mode, press the or NUMBER
buttons.
Otherwise press the TV/AV button on the remote control
handset to select AV. The VCR playback picture appears on
the screen.
You can also record programmes received by the TV on video tape.
Component in sockets (option)
1. Connect the COMPONENT video output sockets (Y Cb Cr, Y Pb
Pr or Y B-YR-Y) of the COMPONENT (480) to the
COMPONENT INPUT sockets ( Y PB PR ) on the set.
2. Connect the audio cable from the COMPONENT to AUDIO
sockets of COMPONENT INPUT.
3. Press the TV/AV button to select COMPONENT.
4. Press the PLAY button on the COMPONENT.
THE COMPONENT playback picture appears on the screen.
Headphone socket (option)
In some models which have a headphone socket can perform this
function.
Insert the headphone plug to the headphone socket of the set. You
can listen to the sound through the headphone. To adjust the
headphone volume, press the button.
If you press the MUTE button the sound from the headphone and
TV's speakers are switched Off.
/
PR
VIDEO AUDIO
AV