User manual

Installation
Power
This set operates on an AC mains supply, the volt-
age is as indicated on the label on the back cover.
Never apply DC power to the set. In the event of
thunderstorms or powercuts, please pull out the
aerial and mains plugs.
Press the POWER button on the front panel or side
panel to turn off the TV when the TV set is not being
used for a long time.It is recommended to remove the
plug from the wall outlet(Power point).
Disconnecting device from mains
Mains plug is the disconnecting device. The plug
must remain readily operable.
Warning
To prevent fire or shock hazard, do not expose the
set to rain or moisture.
Do not place anything containing liquid on top of
the set, this may cause a fire or could give an
electric shock.
Service
Never remove the back cover of the set as this
can expose you to very high voltage and other
hazards. If the set does not operate properly,
unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket on the back
cover. For the best reception an outdoor aerial
should be used.
Location
Position your set so that no bright light or sunlight
falls directly onto the screen. Care should be
taken not to expose the set to any unnecessary
vibration, moisture, dust or heat. Also ensure that
the set is placed in a position to allow a free flow
of air. Do not cover the ventilation openings on the
back cover.
Aerial socket
1. Connect the RF out socket of the VCR to the
aerial socket on the back of the set.
2. Connect the aerial cable to the RF aerial in
socket of the VCR.
3. Store the VCR channel on the programme
number 0 using the ‘Manual programme tun-
ing’ section.
4.
Select the programme number where the
VCR channel is stored.
5.
Press the PLAY button on the VCR.
Audio/Video in/out sockets (option)
1. Connect the audio/video out sockets of the
VCR to audio/video in sockets of the set.
2. If the VCR is connected to the AV sockets on
the set, press the TV/AV button to select
AV
(or AV 1 )
, or
AV 2 .
3. Press the PLAY button on the VCR.
You can also record programmes received by
the TV on video tape via audio/video out
sockets.
Component in sockets (option)
1. Connect the COMPONENT video output
sockets (Y Cb Cr, Y Pb Pr or Y B-Y R-Y) of the
DVD player to the COMPONENT INPUT sock-
ets (Y PB PR) on the set.
2. Connect the audio cable from the DVD player
to AUDIO IN sockets of AV (or AV1) .
3. Press the TV/AV button to select COMPO-
NENT.
4. Press the PLAY button on the DVD player.
The COMPONENT playback picture appears
on the screen.
Headphone socket (option)
You can listen to the sound through the head-
phones. To adjust the headphone volume, press
the F
/
G
button.
If you press the MUTE button, the sound from the
headphone’s is switched off.
Connection of external equipment
Location and function of controls
Front panel
- MAIN POWER (ON/OFF)
switches the set on or off.
- POWER/STANDBY INDICATOR
illuminates brightly when the set is in standby
mode.
dims when the set is switched on.
- REMOTE CONTROL SENSOR
Note : Only use the supplied remote control
handset. (When you use others, they will not
be able to function.)
- MENU
selects a menu.
-OK
accepts your selection or displays the current
mode.
FF
/
GG
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
DD
/
EE
(Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
2
Contents
Installation..........................................................2
Connection of external equipment..................2
Location and function of controls...................2
Basic operation.................................................4
Other functions.................................................4
On screen menus..............................................5
Setting up TV stations.......................................5
Picture adjustment.............................................6
Time setting........................................................6
Sound adjustment.............................................6
Teletext (option).................................................7
Troubleshooting check list