Colour Television OWNER’S MANUAL ME06 Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
Installation Power This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. Press the POWER button on the front panel or side panel to turn off the TV when the TV set is not being used for a long time.It is recommended to remove the plug from the wall outlet(Power point).
Location and function of controls STILL freezes motion of the sub picture. POSITION relocates the sub picture in clockwise direction. Remote control handset Before you use the remote control handset, please install the batteries. See the next page. 1 11 13 14 10 2 3 8 5 9 * switches the eye function on or off. 10. MUTE switches the sound on or off. 11. TV/AV selects TV or AV mode. switches the set on from standby. exits the Teletext mode. 12.
Basic operation On and off 1. Press the main power button to switch the set on. 2. If the set is in standby mode, press the POWER, D / E, TV/AV or NUMBER buttons on the remote control handset to switch it on fully. 3. Press the POWER button on the remote control handset. The set reverts to standby mode. 4. Press the main power button again to switch the set off.
On screen menus The dialogue between you and your set takes place on screen with an operator menu. The buttons required for the operating steps are also displayed. Menu selection 1. Press the MENU button and then D / E button to display each menu. 2. Press the G button and then D / E button to select a menu item. 3. Press the G button to display the sub menu or the pull-down menu. 4. Change the setting of an item in the sub or pull-down menu with the F / G or D / E.
Picture adjustment Note: Picture menu options are not available for the RGB input source. PSM (Picture Status Memory) The picture Dynamic, Standard, Mild and Game are programmed for good picture reproduction at the factory and cannot be changed. XD You can enjoy the vivid and hi-definition picture with LG’s excellent Digital Reality processor technology. Eye (option) When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
PIP operation (option) Option : PIP (Picture in Picture) displays a picture within a picture. On and off Press the PIP button to switch on the sub picture. Press this button again to switch it off. Input mode selection for sub picture Press the INPUT button to select the input mode for the sub picture. Programme number AV1 AV2 Swapping between main and sub pictures Press the SWAP button to exchange the main and sub pictures.
Teletext (option) Teletext (or TOP text) is an optional function, therefore only a set with the teletext system can receive the teletext broadcast. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems.