ENGLISH OWNER’S MANUAL LED TV LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating the your TV and retain it for future reference. 22MA53D 22MA53V 22MA53S 23MA53D 23MA53V 23MA53S 24MA53D 24MA53V 24MA53S 27MA53D 27MA53V 27MA53S www.lg.
TABLE OF CONTENTS TABLE OF CONTENTS ENGLISH 3 LICENSES 35 REMOTE CONTROL 4 INSTALLATION PROCEDURE 37 CUSTOMIZING SETTINGS 37 Accessing main menus 38 USING THE USER GUIDE 38 38 38 Accessing User Guide menu.
LICENSES 3 LICENSES Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.
INSTALLATION PROCEDURE INSTALLATION PROCEDURE ENGLISH 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV. 3 Connect an external device to the TV. NOTE Image shown may differ from your TV. yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yy The available menus and options may differ from the input source or product model that you are yy using. New features may be added to this TV in the future.
ASSEMBLING AND PREPARING 5 ASSEMBLING AND PREPARING ENGLISH Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. NOTE The accessories supplied with your product may vary depending on the model.
ASSEMBLING AND PREPARING ENGLISH Remote control. Batteries (AAA). Stand Base. CD (Owner's Manual). Cards. (See p.11, See p.15) (See p.35, See p.36) or Power Cord. AC-DC Adapter. (Depending on the country) (See p.13) (See p.13) AC-DC Adapter. (Depending on the country) (See p.13) Cable Tie. Stand Body. RGB Cable. (See p.14) (See p.11, See p.15) (See p.
ASSEMBLING AND PREPARING 7 NOTE 1. Connect to TV. Wall ANTENNA/ CABLE IN Cable / Antenna or Isolator 2. Connect to Set-Top box. Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box. “Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard.
ASSEMBLING AND PREPARING Parts and buttons ENGLISH Remote Control Sensor Standby Light yyLighting On: When Power is turend off yyLighting Off: When Power is turned on Touch Buttons Touch button Description Scrolls through the saved programmes. Adjusts the volume level. OK Selects the highlighted menu option or confirms an input. SETTINGS Accesses the main menus, or saves your input and exits the menus. INPUT Changes the input source. /I Turns the power on or off.
ASSEMBLING AND PREPARING 9 ENGLISH 22MA53D 23MA53D 24MA53D 27MA53D (19V ) 22MA53S 23MA53S 24MA53S 27MA53S (19V ) 22MA53V 23MA53V 24MA53V (19V 27MA53V ) LAN Only UK Connection panel (See p.
ASSEMBLING AND PREPARING Lifting and moving the TV ENGLISH When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for save transportation regardless of its type and size. When holding the TV, the screen should face yy away from you to prevent the screen from scratches. CAUTION Avoid touching the screen at all times, as this may result in damage to the screen or some of the pixels used to create images.
ASSEMBLING AND PREPARING 11 Setting up the TV 3 Attach the Stand Base from the TV. If you are not mounting the TV to a wall, use the following instructions to attach the stand. 1 Place the TV with the screen side down on a flat and cushioned surface. CAUTION Lay a foam mat or soft protective cloth yy on the surface to protect the screen from damage. When attaching the stand to the TV, yy place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
ASSEMBLING AND PREPARING CAUTION ENGLISH Do not carry the monitor upsideyy down as this may cause it to fall off its stand, resulting in damage or injury. The illustration shows a general yy example of installation and may look different from the actual product. Do not carry the monitor upsideyy down by holding the stand body as this may cause it to fall off, resulting in damage or injury. The illustration shows a general yy example of installation and may look different from the actual product.
ASSEMBLING AND PREPARING Mounting on a table 13 2 Connect the AC-DC Adapter and Power Cord ENGLISH to a wall outlet. 1 Lift and tilt the TV into its upright position on a table. Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm or WARNING When you adjust the angle, do not hold the buttom of the TV frame as shown on the following illustration, as may injure your fingers. CAUTION Disconnect the power cord first, and then move or install the TV.
ASSEMBLING AND PREPARING Using the Kensington security system NOTE ENGLISH Tilt from +20 to -5 degrees up or down to adjust the angle of the TV to suit your view. -5 +20 The Kensington security system connector is located at the back of the TV. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . Connect the Kensington security system cable between the TV and a table.
ASSEMBLING AND PREPARING 15 Detaching the Stand flat and cushioned surface. CAUTION Lay a foam mat or soft protective cloth yy on the surface to protect the screen from damage. When detaching the stand to the TV, yy place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 2 Pull out the Stand Body from the TV. 3 Turn the screw to the left, and then pull out the Stand Base from the Stand Body.
ASSEMBLING AND PREPARING Mounting on a wall 5 Please use VESA standard as below. ENGLISH For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. VESA (A x B) Standard screw Number of screws Wall mount bracket (optional) 10 cm 10 cm 784.8 mm (30.9 inch) and under yy * Wall Mount Pad Thickness : 2.6 mm * Screw : Φ 4.0 mm x Pitch 0.
ASSEMBLING AND PREPARING 17 CAUTION NOTE Use the screws that are listed on the VESA yy standard screw specifications. The wall mount kit includes an installation yy manual and necessary parts. The wall mount bracket is optional. You can yy obtain additional accessories from your local dealer. The length of screws may differ depending yy on the wall mount. Be sure to use the proper length. For more information, refer to the instructions yy supplied with the wall mount.
WATCHING TV WATCHING TV ENGLISH Turning the TV on for the first time When you access the TV for the first time, the initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. 2 Press on the TV or power button on the remote control to turn the TV on. The Standby Light is turned off. NOTE When the TV is in Power saving mode, the Standby Light turns amber. 3 The initial setting screen appears if you access the TV for the first time.
WATCHING TV 19 NOTE 5 When the basic settings are complete, press OK. NOTE If you do not complete the initial setting, it will appear whenever you access the TV. 6 To turn the TV off, press on the TV. The Standby Light is turned on. CAUTION Disconnect the power cord from the power outlet when you do not use the TV for a long period of time. NOTE You can also switch the TV from PC mode to TV mode, press TV/PC. yy You can also access Factory Reset by accessing OPTION in the main menus.
MAKING CONNECTIONS MAKING CONNECTIONS NOTE If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input yy cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual supplied with the connected device. The external device connection may differ from the model. yy Connect external devices to the TV regardless of the order of the TV port.
MAINTENANCE 21 Satellite connection (Not Provided) ENGLISH Only **MA53V, **MA53S model Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75Ω).
MAKING CONNECTIONS Connecting to a HD receiver, DVD, VCR player or Gaming device ENGLISH Connect a HD receiver, DVD, VCR player or Gaming device to the TV and select an appropriate input mode. HDMI connection HDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown on the following illustration. NOTE Use a High Speed HDMI™ Cable.
MAKING CONNECTIONS 23 HDMI to DVI connection NOTE If you do not use an optional external speaker, connect the external device to the TV with the optional audio cable. (Not Provided) (Not Provided) DVD / Blu-Ray / HD Cable Box / HD STB / Gaming Device ENGLISH Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the HDMI to DVI cable as shown in the following illustration. To transmit an audio signal, connect an optional audio cable.
MAKING CONNECTIONS Component connection ENGLISH Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown on the following illustration. To display images by using progressive scan, make sure to use the component cable. NOTE If cables are installed incorrectly, it could case the image to display in black and white or with distorted yy color.
MAKING CONNECTIONS 25 Composite connection NOTE Check to ensure the cable are matched with the corresponding color connection. (Not Provided) DVD / Blu-Ray / HD Cable Box / HD STB / Gaming Device ENGLISH Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown on the following illustration.
MAKING CONNECTIONS Euro Scart connection ENGLISH Transmits the video and audio signals from an external device to the TV. Connect the external device and the TV with the Euro Scart cable as shown on the following illustration. To display images by using progressive scan, make sure to use the Euro Scart cable. Output Type AV1 (TV Out1) Current input mode Digital TV Digital TV Analogue TV Analogue TV Component, AV, HDMI, RGB 1 TV Out : Outputs Analogue TV or Digital TV signals.
MAKING CONNECTIONS 27 Connecting to an audio system ENGLISH Use an optional external audio system instead of the built-in speaker. Headphone connection Transmits the headphone signal from the TV to an external device. Connect the TV with the headphone as shown on the following illustration. NOTE AUDIO menu items are disabled when connecting a headphone. yy Headphone impedance: 16 yy Max audio output of headphone: 10 mW to 15 mW yy Headphone jack size: 0.
MAKING CONNECTIONS Connecting to a USB ENGLISH Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or a USB memory card reader to the TV and access the USB menu to use various multimedia files. or USB (Not Provided) Connecting to a CI Module View the encrypted (pay) services in digital TV mode. This feature is not available in all countries. NOTE Check if the CI module is inserted into the PCMCIA card slot in the right direction.
MAKING CONNECTIONS 29 MHL connection NOTE Connect the mobile phone to the HDMI IN 2(MHL) port to view the phone screen on the TV. yy The MHL passive cable is needed to connect the TV and a mobile phone. yy This only works for the MHL-enabled phone. yy Some applications can be operated by the remote control. yy (Not Provided) Mobile phone ENGLISH Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets.
MAKING CONNECTIONS Connecting to a wired network ENGLISH Only **MA53V model (Only UK) Connect the TV to a local area network (LAN) via the LAN port as shown on the following illustration and set up the network settings. After making a physical connection, a small number of home networks may require the TV network settings to be adjusted. For most home networks, the TV will connect to automatically without any adjustments. For detail information, contact your internet provider or router manual.
MAKING CONNECTIONS 31 Connecting to a PC * Plug & Play: The function when a PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. NOTE It is recommended to use the TV with the HDMI connection for the best image quality. yy If you do not use an optional external speaker, connect the PC to the TV with the optional audio yy cable. If you turn the TV on when the set becomes cold, the screen may flicker. This is normal.
MAKING CONNECTIONS HDMI connection ENGLISH Transmits the digital video and audio signals from your PC to the TV. Connect the PC and the TV with the HDMI cable as shown in the following illustrations. You should set PC as an input label to connect the PC to the TV with an HDMI connection. NOTE Use a High Speed HDMI™ Cable. yy High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher. yy If you want to use HDMI-PC mode, you must set the input label to PC or DVI mode.
MAKING CONNECTIONS 33 HDMI to DVI connection NOTE If you want to use HDMI-PC mode, you must set the input label to DVI mode. yy If you do not use an optional external speaker, connect the PC to the TV with the optional audio cable. yy (Not Provided) (Not Provided) PC ENGLISH Transmits the digital video signal from your PC to the TV. Connect the PC and the TV with the HDMI to DVI cable as shown the following illustrations. To transmit an audio signal, connect an optional audio cable.
MAKING CONNECTIONS RGB connection ENGLISH Transmits the analog video signal from your PC to the TV. Connect the PC and the TV with the D-sub 15 pin cable as shown the following illustrations. To transmit an audio signal, connect an optional audio cable. NOTE If you do not use an optional external speaker, connect the PC to the TV with the optional audio cable.
REMOTE CONTROL 35 REMOTE CONTROL CAUTION Do not mix old and new batteries, as this may damage the remote control. Make sure to point the remote control to the remote control sensor on the TV. Image shown may differ from your TV. (POWER) Turns the TV on or off. TV/RAD Selects Radio, TV and DTV programme. INPUT Selects the input mode. SUBTITLE Recalls your preferred subtitle in digital mode. AD Switches the Audio Description On or Off. PIP Turns the PIP mode on or off.
REMOTE CONTROL ENGLISH SETTINGS Accesses the main menus. Teletext buttons These buttons are used for teletext. Navigation buttons Scrolls through menus or options. OK Selects menus or options and confirms your input. BACK Returns to the previous level. SSIMPLINK Accesses the AV devices connected with the HDMI cable through HDMI-CEC. Opens the SIMPLINK menu. TV/PC Selects TV or PC mode. Coloured buttons These buttons are used for teletext (on TELETEXT models only), Programme edit.
CUSTOMIZING SETTINGS 37 CUSTOMIZING SETTINGS ENGLISH Accessing main menus 1 Press SETTINGS to access the main menus. 2 Press the Navigation buttons to scroll to one of the following menus and press OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. 4 When you are finished, press EXIT. BACK. When you return to the previous menu, press PICTURE Adjusts the image size, quality or effect. AUDIO Adjusts the sound quality, effect or volume level.
USING THE USER GUIDE ENGLISH USING THE USER GUIDE Accessing User Guide menu. Using the TV menu Image shown may differ from your TV. yy 3 User Guide 2 To use input device To set ODC (Over Driving Circuit) 1 Press SETTINGS to access the main menus. 2 Press the RED button to access the Customer Support menus. 3 Press the Navigation button to scroll to User CHANNEL Setting option you want and press OK. 5 When you are finished, press EXIT. When you return to the previous menu, press BACK.
MAINTENANCE 39 MAINTENANCE Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall yy outlet to prevent possible damage from lightning or power surges. Screen and frame To remove dust, wipe the surface with a dry and soft cloth.
MAINTENANCE Preventing “Image burn” or “Burn-in” on your TV screen ENGLISH If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become yy a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the yy letterboxed area of the screen.
TROUBLESHOOTING 41 TROUBLESHOOTING ENGLISH General Problem Resolution Cannot control the TV with the remote control. yy Check the remote control sensor on the product and try again. yy Check if there is any obstacle between the product and the remote control. yy Check if the batteries are still working and properly installed ( to , to ). No image display and no sound is produced. yy Check if the product is turned on. yy Check if the power cord is connected to a wall outlet.
SPECIFICATIONS SPECIFICATIONS ENGLISH Television system Satellite Digital TV1 Satellite Digital TV2 Digital TV Analogue TV DVB-T DVB-C DVB-S/S2 DVB-T/T2 DVB-C DVB-S/S2 DVB-T DVB-C PAL/SECAM B/G/D/K PAL-I/I’, SECAM L/L’3 Programme coverage VHF, UHF C-Band, Ku-Band VHF, UHF VHF: E2 to E12, UHF: E21 to E69, CATV: S1 to S21, HYPER: S21 to S47 Maximum number of 6,000 storable programmes 1,500 1 Only satellite models 2 Only DVB-T2 support models 3 Except for DVB-T2 support models
SPECIFICATIONS Panel Video Signal 22MA53V 22MA53S Screen Type 550 mm Wide (21.5 inch) Visible diagonal size : 550 mm Pixel Pitch 0.248 mm (H) x 0.248 mm (V) Max.
SPECIFICATIONS ENGLISH 23MA53D 23MA53V 23MA53S Panel Video Signal Screen Type 580 mm Wide (23 inch) Visible diagonal size : 580 mm Pixel Pitch 0.265 mm (H) x 0.265 mm (V) Max.
SPECIFICATIONS 45 ENGLISH 24MA53D 24MA53V 24MA53S Panel Video Signal Screen Type 600 mm Wide (23.8 inch) Visible diagonal size : 600 mm Pixel Pitch 0.275 mm (H) x 0.275 mm (V) Max.
SPECIFICATIONS ENGLISH 27MA53D Panel Video Signal 27MA53V 27MA53S Screen Type 690 mm Wide (27 inch) Visible diagonal size : 690 mm Pixel Pitch 0.311 mm (H) x 0.311 mm (V) Max.
SPECIFICATIONS RGB (PC) / HDMI (PC) supported mode Component supported mode Horizontal Frequency(kHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 720 x 400 31.468 70.080 720 x 480 15.730 59.940 15.750 60.000 640 x 480 31.469 59.940 720 x 480 640 x 480 37.500 75.000 720 x 576 15.625 50.000 800 x 600 37.879 60.317 720 x 480 31.470 59.940 800 x 600 46.875 75.000 720 x 480 31.500 60.000 720 x 576 31.250 50.000 1280 x 720 44.
SPECIFICATIONS NOTE ENGLISH Avoid keeping a fixed image on the set’s screen for prolonged periods of time. The fixed image may yy become permanently imprinted on the screen. Use a screen saver when possible. There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. yy Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear.
Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. MODEL SERIAL To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http:// opensource.lge.com.
