ENGLISH OWNER’S MANUAL IPS LED MONITOR Please read this manual carefully before operating your set and retain it for future reference. IPS LED MONITOR MODEL 24MB65PD www.lg.
TABLE OF CONTENTS CONTENTS ENGLISH ENG 3 ASSEMBLING AND PREPARING 22 TROUBLESHOOTING 3 Unpacking 4 Parts and buttons 24 SPECIFICATIONS 5 Setting up the Monitor set 24 24MB65PD 5 - Attaching the Stand Base 25 Preset Modes (Resolution) 5 - Detaching the stand base 25 Indicator 6 - Detaching the stand body 6 - Using the cable holder 6 - Mounting on a table 26 PROPER POSTURE 7 - Adjusting the angle 26 Proper posture for using the Monitor set.
ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card Power Cord DVI-D Cable D-SUB Cable (This cable is not included in all (This cable is not included in all countries.) countries.
ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator yyLED On : Power is on yyLED Off: Power is off (Power Button) Front Side Buttons Input Connectors (��������������� See p.
ASSEMBLING AND PREPARING Detaching the stand base Attaching the Stand Base 1 Place the monitor's screen face down. 1 Place the Monitor set with the screen side To protect the screen from scratches, cover the surface with a soft cloth. down on a flat and cushioned surface. CAUTION To protect the screen from scratches, cover yy the surface with a soft cloth. 2 Using a coin, turn the screw in the stand base counterclockwise. Detach the stand base from the stand body.
ASSEMBLING AND PREPARING ENGLISH ENG Detaching the stand body Mounting on a table 1 Place the monitor's screen face down. To 1 Lift the monitor and place it on the table in an protect the screen from scratches, cover the surface with a soft cloth. upright position. Install at least 10 cm away from the wall to ensure sufficient ventilation. 2 Using a screwdriver, remove the four screws and detach the stand from the monitor.
ASSEMBLING AND PREPARING Adjusting the angle WARNING in an upright position. To avoid injury to the fingers when adjusting yy the screen, do not hold the lower part of the monitor's frame as illustrated below. 2 Adjust the angle of the screen. The angle of the screen can be adjusted up to 5° forwards and 35° backwards for a comfortable viewing experience. Front Side Be careful not to touch or press the screen yy area when adjusting the angle of the monitor.
ASSEMBLING AND PREPARING 3 The height can be adjusted up to 130 mm. ENGLISH ENG 130.0mm Using the Kensington locking device The connector for the Kensington lock is located on the rear of the monitor. For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com. Connect the monitor to the table with the Kensington lock cable. CAUTION Once the pin is removed, it is not necessary yy to re-insert it to adjust the height.
ASSEMBLING AND PREPARING Swivel stand 1 Swivel 355 degrees and adjust the angle of the Monitor set to suit your view. Using the Pivot function The pivot function allows you to rotate the screen 90 degrees clockwise. 1 Lift the monitor to its highest height to utilize the Pivot function. 2 Landscape & Portrait : You can rotate the panel 90° clockwise. Please be cautious and avoid contact between the monitor head and the Stand Base when rotating the screen to access the Pivot function.
ASSEMBLING AND PREPARING Mounting on a wall Model ENGLISH ENG For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 10 cm 10 cm 10 cm 10 cm 24MB65PD VESA (A x B) 100 x 100 Standard screw M4 Number of screws 4 CAUTION Disconnect the power cord first, and then yy move or install the Monitor set. Otherwise electric shock may occur.
USING THE MONITOR SET 11 USING THE MONITOR SET Your Monitor set supports Plug & Play*. yy *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. D-SUB connection Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations.
USING THE MONITOR SET NOTE ENGLISH ENG If you use DP, it can cause compatibility yy problem. When you want to use two PC in our Monitor, yy please connect the signal cable(D-SUB/ DVI-D/DP) respectively in Monitor set. If you turn the Monitor set on while it is cold, yy the screen may flicker. This is normal. Some red, green, or blue spots may appear yy on the screen. This is normal. Self Image Setting Function Press the power button on the bottom panel to turn the power on.
USING THE MONITOR SET 13 Peripheral device connection (Not Provided) NOTE DP = Display Port yy The cable is Separate purchase. NOTE Peripheral devices are sold separately. yy Headphones or speakers may not work noryy mally, depending on the server PC settings. ENG ENGLISH Connect peripheral devices to the monitor.
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS ENGLISH ENG 1 Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 3 Select EXIT to leave the OSD menu. Monitor set Buttons Button Description Accesses the main menus.(See p.
CUSTOMIZING SETTINGS 15 Customizing Settings ENG ENGLISH Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Set the options by pressing the ◄ or ► or ▼ buttons. 3 Select the "Next Menu" button to enter the more option settings. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS Picture ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Enter to Picture by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► or ▼ buttons. 5 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 17 Color ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Select Color by pressing the ► button. 4 Enter to Color by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS Display ENGLISH ENG 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Select Display by pressing the ► button. 4 Enter to Display by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS 19 Others ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. 2 Select the "Next Menu" button to enter the more option settings. 3 Select Others by pressing the ► button. 4 Enter to Others by pressing the ▼ button. 5 Set the options by pressing the ◄ or ► or ▼ buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below.
CUSTOMIZING SETTINGS READER Setting ENGLISH ENG 1 Press READER button on the bottom of the Monitor set to display the Reader Mode OSD. 2 Set the options by pressing the ◄ buttons. Each option is explained below. Reader Mode Description Reader 1 It is a mode that the screen is adjusted to the best for the newspaper. If you want screen more bright, you can control brightness in Menu OSD. Reader 2 It is a mode that the screen is adjusted to the best for the cartoon.
CUSTOMIZING SETTINGS 21 SUPER ENERGY SAVING Setting ENG ENGLISH 1 Press button on the bottom of the Monitor set to display the SUPER ENERGY SAVING OSD. 2 Set the options by pressing the ► buttons. Each option is explained below. SUPER ENERGY SAVING Description High Enables SUPER ENERGY SAVING you can save energy with this energy- high efficient function. Low Enables SUPER ENERGY SAVING you can save energy with this energy- low efficient function. Off Disables SUPER ENERGY SAVING.
TROUBLESHOOTING ENGLISH ENG TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator White? Is the power indicator flickering? Do you see an "OUT OF RANGE" message on the screen? Do you see a "NO SIGNAL" message on the screen? yy Check and see if the power cord is connected properly to the power outlet. yy Press the Power button.
TROUBLESHOOTING 23 CAUTION Display image is incorrect The screen color is mono or abnormal. yy Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. yy Make sure the video card is properly inserted in the slot. yy Set the color setting higher than 24 bits (true color) at Control Panel ► Settings. The screen blinks. yy Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS 24MB65PD Display Sync Input Screen Type 60.9 cm (24 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 60.9 cm Pixel Pitch 0.27 mm x 0.27 mm (Pixel Pitch) Horizontal Frequency 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB,DVI-D) 56Hz to 61Hz (DP) Separate Sync.
SPECIFICATIONS 25 Preset Modes (Resolution) ENG ENGLISH D-SUB/DVI Timing Display Modes (Resolution) Horizontal Frequency(kHz) Vertical Frequency(Hz) Polarity(H/V) 720 x 400 31.468 70 -/+ 640 x 480 31.469 60 -/- 640 x 480 37.500 75 -/- 800 x 600 37.879 60 +/+ 800 x 600 46.875 75 +/+ 1024 x 768 48.363 60 -/- 1024 x 768 60.023 75 +/+ 1152 x 864 67.500 75 +/+ 1280 x 1024 63.981 60 +/+ 1280 x 1024 79.976 75 +/+ 1680 x 1050 65.290 60 -/+ 1920 x 1080 67.
PROPER POSTURE ENGLISH ENG PROPER POSTURE Proper posture for using the Monitor set. Adjust the Monitor set and your posture to allow you to view images at the optimal viewing angle. Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright. Adjust the location of the Monitor set to avoid it reflecting light.
Declaration of Conformity Trade Name: LG Model : 24MB65PDG Responsible Party: LG Electronics Inc. Address : 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL: 201-266-2534 *above information is only for USA FCC Regulatory Make sure to read the Safety Precautions before using the product. Keep the Owner’s Manual (CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service.
