ENGLISH LCD TV / DVD Combo OWNER’S MANUAL LCD TV MODELS 2 6 L G 4 0* * 3 2 L G 4 0* * Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service.
is a trademark of DVD format/Logo Licensing Corporation. “ This product incorporates copy protection technology that is protected by U.S. and foreign patents, including patent numbers 5,315,448 and 6,836,549, and other intellectual property rights. The use of Macrovision’s copy protection technology in the product must be authorized by Macrovision. Reverse engineering or disassembly is prohibited.
ACCESSORIES DISC ME NU - RO TA + Owner's Manual TE RO TA T M SE EN TU U/ P E DIS PLA Y RE ZO PE OM AT SU TITL E ME BTI TL A-B AN GLE E ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. AU DIO NU PB C RE TU RN EJ Owner’s Manual Batteries EC T Remote Control Polishing Cloth Polishing cloth for use on the screen.
CONTENTS ACCESSORIES ............................................. 1 Selecting the Programme Table . . . . . . . . . . . . . . . 41 SIMPLINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 AV Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 CONTENTS PREPARATION Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . 4 Back Panel Information . . . . . . . . . . . . . . .
PICTURE CONTROL Set Password & Lock System . . . . . . . . . . . . . . . . . 91 Block Programme . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Parental Control (In Digital Mode only) . . . . . . . . 93 Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 CONTENTS Picture Size (Aspect Ratio) Control . . . . . . . . . . . . 65 Preset Picture Settings - Picture Mode-Preset . . . . . . . . . . . . . . . . . . . . 67 - Auto Colour Tone Control (Warm/Medium/Cool) . . . .
PREPARATION FRONT PANEL CONTROLS ■ ■ Image shown may differ from your TV. If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth. PREPARATION EJECT PLAY/PAUSE / STOP SKIP PROGRAMME P VOLUME OK OK MENU MENU Power/Standby Indicator • illuminates red in standby mode. • illuminates blue when the TV is switched on. Note: You can adjust Power Indicator in the OPTION menu.
BACK PANEL INFORMATION 10 HDMI IN 3 1 3 AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT USB IN SERVICE ONLY 5 4 COMPONENT IN AV 1 AV 2 VIDEO VIDEO L/MONO AUDIO R 2 13 PREPARATION PCMCIA CARD SLOT Image shown may differ from your TV. R ■ HDMI/DVI IN 2 RGB IN (PC) S-VIDEO 11 AV IN 3 12 AUDIO 1(DVI) RS-232C IN (CONTROL & SERVICE) H/P ANTENNA IN 5 6 7 8 8 Component Input Connect a component video/audio device to these jacks. 9 Antenna Input Connect RF antenna to this jack.
PREPARATION STAND INSTRUCTION ■ Image shown may differ from your TV. INSTALLATION DETACHMENT Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the S T A N D B O D Y with C O V E R B A S E of the TV. PREPARATION 1 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Loose the bolts from TV. 3 Detach the stand from TV. STAND BODY COVER BASE 3 Assemble the TV as shown.
BACK COVER FOR WIRE ARRANGEMENT ■ Image shown may differ from your TV. Align the hole with the tab on the C A B L E M A N A G E M E N T C L I P. Turn the C A B L E M A N A G E M E N T C L I P as shown. Note: This cable management clip can be broken by excessive pressure. 2 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section.
PREPARATION PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT FALL OVER. ■ ■ PREPARATION ■ You should purchase necessary components to fix the TV to the wall on the market. Position the TV close to the wall to avoid the possibility of it falling when pushed. The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury.
■ ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally. EARTHING Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
PREPARATION ■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. ANTENNA CONNECTION ■ ■ For optimum picture quality, adjust antenna direction. An antenna cable and converter are not supplied.
EXTERNAL EQUIPMENT SETUP ■ To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment. ■ Image shown may differ from your TV. HD RECEIVER SETUP ■ This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
EXTERNAL EQUIPMENT SETUP Connecting with a HDMI to DVI cable USB IN SERVICE ONLY COMPONENT IN AV 1 VIDEO 1 AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT HDMI/DVI IN 2 RGB IN (PC) 2 Connect the audio output of the digital set-top box to the A U D I O I N ( R G B / D V I ) jack on the TV. 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 4 Select HDMI 1 input source using the I N P U T button on the remote control.
DVD SETUP When connecting with a component cable 1 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the TV. USB IN SERVICE ONLY AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT COMPONENT IN AV 1 Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the TV. 3 Turn on the DVD player, insert a DVD. 4 Select C o m p o n e n t input source using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT SETUP 2 Connect the audio outputs of the DVD to the A U D I O input jacks on the TV. 3 Turn on the DVD player, insert a DVD. VIDEO S-VIDEO 4 Select AV3 input source using the INPUT button on the remote control. 5 Refer to the DVD player's manual for operating instructions. L R OUTPUT SWITCH 1 VIDEO L/MONO AUDIO R EXTERNAL EQIPMENT SETUP Connect the S-VIDEO output of the DVD to the S - V I D E O input on the TV.
VCR SETUP To avoid picture noise (interference), allow adequate distance between the VCR and TV. If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain visible.
EXTERNAL EQUIPMENT SETUP Connecting with a Euro Scart cable Connect the Euro scart socket of the VCR to the A V 1 Euro scart socket on the TV. 2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 4 COMPONENT IN AV 1 AV 2 (PC) Select A V 1 input source using the I N P U T button on the remote control.
4 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) L VIDEO R OUTPUT SWITCH HDMI IN 3 3 Connect the audio outputs of the VCR to the AUDIO input jacks on the TV. S-VIDEO ANT OUT 1 Select AV3 input source using the I N P U T button on the remote control. ANT IN 2 S-VIDEO EXTERNAL EQIPMENT SETUP 2 Connect the S-VIDEO output of the VCR to the S VIDEO input on the TV. The picture quality is improved; compared to normal composite (RCA cable) input.
EXTERNAL EQUIPMENT SETUP Insert the CI Module to P C M C I A (Personal Computer Memory Card International Association) C A R D S L O T of TV as shown. TV For further information, see p.40. VIDEO L/MONO AUDIO R EXTERNAL EQIPMENT SETUP 1 1 HDMI IN 3 - To view the encrypted (pay) services in digital TV mode. - This feature is not available in all countries.
Connecting with a HDMI to DVI cable USB IN SERVICE ONLY AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT IN AV 1 VIDEO HDMI/DVI IN 1 Connect the DVI output of the PC to the H D M I / D V I I N 1 ( D V I ) jack on the TV. 2 RGB IN (PC) 2 Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV. 3 Turn on the PC and the TV. 4 Select HDMI 1 input source using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT SETUP Supported Display Resolution HDMI[DTV] mode RGB[PC], HDMI[PC] mode Resolution 720x400 EXTERNAL EQIPMENT SETUP 20 640x480 800x600 832x624 1024x768 1280x768 1360x768 1366x768 Horizontal Frequency(kHz) Vertical Frequency(Hz) 31.468 31.469 37.684 37.879 46.875 49.725 48.363 56.470 60.123 47.78 47.72 47.56 70.08 59.94 75.00 60.31 75.00 74.55 60.00 70.00 75.029 59.87 59.8 59.6 Resolution 720x480 720x576 1280x720 1920x1080 Horizontal Frequency(kHz) Vertical Frequency(Hz) 15.
Screen Setup for PC mode Screen Reset Returns to the default settings Position, Size and Phase at the factory. This function works in the following mode : RGB[PC]. Move OK SCREEN Move RETURN Prev. D • Contrast : 70 • Brightness : 50 • Sharpness : 50 • Colour : 50 • Tint :0 • Advanced Control • Picture Reset Screen 1MENU 2 OK Select Reset. OK Select Yes. 5 OK To Set Position Size Phase G Select PICTURE. Select SCREEN. 4 Auto Config.
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This function works in the following mode : RGB[PC]. EXTERNAL EQIPMENT SETUP PICTURE Move SCREEN OK RETURN Prev. Move D • Contrast : 70 • Brightness : 50 • Sharpness : 50 • Colour : 50 • Tint :0 • Advanced Control • Picture Reset Resolution Auto Config.
Selecting Resolution To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] mode. Move OK SCREEN Move RETURN Prev. D • Contrast : 70 • Brightness : 50 • Sharpness : 50 • Colour : 50 • Tint :0 • Advanced Control • Picture Reset Resolution Auto Config. Position 2 Phase 4 Reset Select PICTURE. OK Select SCREEN. OK Select Resolution.
EXTERNAL EQUIPMENT SETUP Auto Configure (RGB [PC] mode only) Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. EXTERNAL EQIPMENT SETUP Auto configure This function is for automatic adjustment of the screen position, clock, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress.
WATCHING TV / PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen. 1 DISC MENU MENU/ SETUP POWER Switches the TV on from standby or off to standby. ROTATE + ROTATE - 1 DVD Control Controls the Built-In DVD Operation. buttons For further details, see the ‘DVD Operation’ section. TV/RAD Selects Radio, TV, DTV channel. Q.
WATCHING TV / PROGRAMME CONTROL VOLUME UP Adjusts the volume. /DOWN DISC MENU MENU/ SETUP FAV Displays the selected favourite programme. ROTATE - Programme Selects a programme. UP/DOWN ROTATE + WATCHING TV / PROGRAMME CONTROL MUTE Switches the sound on or off. PAGE Move from one full set of screen information to the next UP/DOWN one. 0~9 number Selects a programme. button Selects numbered items in a menu. LIST Displays the programme table. Q.VIEW Returns to the previously viewed programme.
TURNING ON THE TV - When your TV is turned on, you will be able to use its features. Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. 2 In standby mode to turn TV on, press the r / I, INPUT or P button on the TV or press the POWER, INPUT, P or NUMBER button on the remote control and the TV will switch on.
WATCHING TV / PROGRAMME CONTROL QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. • A s p e c t R a t i o : Selects your desired picture format. • P i c t u r e M o d e : Selects your desired Picture Mode. • S o u n d M o d e : It is a feature to automatically set the WATCHING TV / PROGRAMME CONTROL For Zoom Setting, select 14:9, Zoom1 and Zoom2 in Ratio Menu.
ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. SETUP Move PICTURE OK Aspect Ratio Picture Mode : 16:9 : Vivid • Backlight • Contrast • Brightness • Sharpness • Colour • Tint 100 100 50 70 70 0 OK R G E AUDIO SETUP PICTURE TIME OPTION Auto Volume Balance Sound Mode AUDIO LOCK Move OK : Off : Standard • 120Hz • 200Hz • 500Hz • 1.
WATCHING TV / PROGRAMME CONTROL AUTO PROGRAMME TUNING Use this to automatically find and store all available programmes. When you start auto programming in digital mode, all previously stored service information will be deleted.
MANUAL PROGRAMME TUNING (IN DIGITAL MODE) Manual Tuning lets you manually add a programme to your programme list. Move SETUP OK Auto tuning Manualtuning tuning Manual Move Auto tuning Manual Manualtuning tuning Programme Edit Booster : On Software Update : Off Diagnostics CI Information Programme Edit Booster : On Software Update : Off Diagnostics CI Information OK F DTV G Your receiver will add this channel to your channel list. UHF CH. Bad 30 Normal Good ADD Close 1MENU Select SETUP.
WATCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
A Assigning a station name You can assign a station name with five characters to each programme number. 1MENU OK OK Select Manual Tuning. 6 3 OK Select the position and make your choice of the second character, and so on. You can use an the alphabet A to Z , the number 0 to 9 , +/ -, and blank. OK Select Close. OK Select Store. Select TV. 7 4 Select Name. A Fine Tuning WATCHING TV / PROGRAMME CONTROL 2 5 Select SETUP. Normally fine tuning is only necessary if reception is poor.
WATCHING TV / PROGRAMME CONTROL PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using P viewing. button during TV If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu This function enables you to skip the stored programmes. In some countries it is possible to move a programme number by using the YELLOW button only.
(IN DTV/RADIO MODE) A Skipping a programme number 1 BLUE 3 BLUE A Turn the skipped programme number to blue. • When a programme number is skipped it means that you will be unable to select it using the P button during normal TV viewing. • If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG. Release the skipped programme. Selecting favourite programme 1 FAV Select your favourite programme number.
WATCHING TV / PROGRAMME CONTROL IN TV MODE This function enables you to delete or skip the stored programmes. You can also move some channels to other programme numbers. A Auto Sort 1 GREEN WATCHING TV / PROGRAMME CONTROL 1 2 RED 3 RED Select a programme number to be deleted. Release the deleted programme. Select a programme number to be moved. Turn the moved programme number to YELLOW. YELLOW 3 YELLOW Release the moved programme.
BOOSTER (IN DIGITAL MODE ONLY) If reception is poor, selectBooster to On. When the signal is strong, select “Off”. Move OK Auto tuning Manual tuning Programme Edit Booster :: On Booster On Software Update : Off Diagnostics CI Information 1MENU OK Select Booster. OK Select On or Off. 3 OK Move Auto tuning Manual tuning Programme Edit Booster :: On Booster On Software Update : Off Diagnostics CI Information OK Off On On Select SETUP. 2 4 SETUP WATCHING TV / PROGRAMME CONTROL SETUP Save.
WATCHING TV / PROGRAMME CONTROL SOFTWARE UPDATE Software Update means software can be downloaded through the digital terrestrial broadcasting system. SETUP Move SETUP OK WATCHING TV / PROGRAMME CONTROL Auto tuning Manual tuning Programme Edit Booster : On Software Software Update Update :: Off Off Diagnostics CI Information 1MENU 2 OK Move Auto tuning Manual tuning Programme Edit Booster : On Software Software Update Update :: Off Off Diagnostics CI Information 3 Select SETUP.
DIAGNOSTICS (IN DIGITAL MODE ONLY) This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software Version. This displays the information and signal strength of the tuned MUX. This displays the signal information and service name of the selected MUX. SETUP Move Engineering Diagnostics OK : LG Electronics Inc. : 26LG4000 : 708KGKG00019 : V1.18.1 D CH 30 CH 34 CH 36 CH 38 CH 54 CH 60 E RETURN Prev. 1MENU Select Diagnostics. OK OK MENU Exit Select SETUP.
WATCHING TV / PROGRAMME CONTROL CI [COMMON INTERFACE] INFORMATION This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CAM module from the TV. This may cause a malfunction.
SELECTING THE PROGRAMME TABLE You can check which programmes are stored in the memory by displaying the programme table. Displayed when the Locked Programme. Displaying programme LIST 1 LIST A TV/RAD Select a programme. 2 OK From the programme you are currently watching, the mode will change from TV to DTV to Radio. Switch to the chosen programme number. Paging through a programme list 1 P A have been set up to be skipped by auto programming or in the programme edit mode.
WATCHING TV / PROGRAMME CONTROL This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. O f f”. If you do not want SIMPLINK menu, select “O SIMPLINK function is not supported by HDMI IN 3 input.
SIMPLINK Functions Disc playback Control connected AV devices by pressing the not provide such functions.) , OK, G, A, l l, FF and GG buttons.(The Ô button does Direct Play After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of the AV devices connected to the TV and operate it. Switch audio-out Offers an easy way to switch audio-out.
WATCHING TV / PROGRAMME CONTROL INPUT LABEL Selects a label for each input source.
AV MODE You can select the optimal images and sounds when connecting AV devices to external input. 2 OK Cinema Game Sport Select the desired source. • If you select Cinema Mode in AV mode, Cinema mode will be selected both for Picture Mode and Sound Mode in PICTURE menu and AUDIO menu respectively. • If you select “Off ” in AV mode, the picture and image which you initially set will be selected.
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
Button Function in NOW/NEXT Guide Mode RED Change EPG mode. YELLO YELLOW Enter Timer Record/Remind setting mode. BLUE Enter Timer Record/Remind list mode. OK Change to the selected programme. P GUIDE TV/RAD INFO i Page Up/Down. Switch off EPG. Select TV or RADIO Programme. The detail information on or off. Button Function in 8 Day Guide Mode RED GREEN Change EPG mode. Enter Date setting mode. YELLO YELLOW Enter Timer Record/Remind setting mode. BLUE Enter Timer Record/Remind list mode.
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) Button Function in Extended Description Box Text Up/Down. YELLO YELLOW Enter Timer Record/Remind setting mode. INFO i GUIDE The detail information on or off. Switch off EPG. EPG (ELECTRONIC PROGRAMME GUIDE) Button Function in Record/Remind Setting Mode - This function is available only when recording equipment that use pin8 recording signalling has been connected to the DTV-OUT terminal, using a SCART cable.
DVD OPERATION NOTES ON DISCS Symbol used in this manual objects on discs outside of their case may cause warping. “ ” may appear on the TV screen during operation. A “ ” means that the operation is not permitted by the unit or is not available on the disc. Structure of disc contents On handling discs ■ Do not touch the playback side of the disc. Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and Audio CDs are divided into tracks.
DVD OPERATION Types of Playable Discs ■ ■ ■ DVD (8 cm / 12 cm disc) Video CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD -R, DVD +R, DVD -RW, DVD +RW, Kodak Picture CDs, SVCD, and CD-R / CDRW that contains audio titles, MP3, and/or JPG files.
! NOTE G Insert a DVD and press STOP button twice to access this DVD setup menu. SELECTING LANGUAGE Selecting Audio Language Select your preferred audio language. If an audio language is selected, the selected audio language is played whenever you start a new disc playback. (The disc must contain the selected language) You can also select another available audio language during playback with the A U D I O button on the remote control during playback.
DVD OPERATION Selecting Subtitle Language Select your preferred subtitle language. If a subtitle language is selected, the selected subtitle language is played whenever you start a new disc playback. (The disc must contain the selected language) You can also select another available subtitle language with the S U B T I T L E button on the remote control during playback.
Selecting Disc OSD Language The OSD (on screen display) can be shown on the screen in your specified language.
DVD OPERATION PARENTAL CONTROL / RATINGS Parental Control Setup Some movies contain scenes that may not be suitable for children to view. Many of these discs contain parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative.
Changing the password Audio Language Audio Language Subtitle Language Subtitle Language Rating Level Rating Level New Password G ---- Menu Language Digital Output Digital Output DRC : Move MENU/ SET UP G : Next Select N e w P a s s w o r d. 1 2 3 4 5 6 7 8 9 DE : Move F : Prev ---- DVD OPERATION Menu Language DE 2 G TV Screen DRC 1 New Password TV Screen Input the password. 0 3 1 2 3 4 5 6 7 8 9 Enter it again when requested.
DVD OPERATION PICTURE SIZE CONTROL You can watch TV in various picture formats. Audio Language Audio Language Subtitle Language Subtitle Language Rating Level Rating Level New Password DVD OPERATION G Menu Language Digital Output 4 : 3 LB 4 : 3 PS 16 : 9 DRC DE 1 MENU/ SET UP 3 TV Screen Digital Output 4 : 3 LB 4 : 3 PS 16 : 9 DRC : Move G : Next DE : Move F : Prev Select T V S c r e e n. ■ Depending on the disc, the TV screen feature may not be available.
DIGITAL AUDIO OUTPUT You can select the output for SPDIF (Sony/Philips Digital Interface). Each DVD disc has a variety of audio output options. Set the player’s AUDIO options according to the type of audio system you use.
DVD OPERATION DYNAMIC RANGE COMPRESSION (DRC) Confines the audio range to prevent excessively loud sound yet allows you to hear the low sounds clearly. Audio Language Audio Language Subtitle Language Subtitle Language Rating Level Rating Level New Password New Password TV Screen TV Screen Menu Language Menu Language Digital Output Digital Output DVD OPERATION DRC DE 1 MENU/ SET UP 2 3 G : Move G : Next Off On DE G : Move ■ Return to normal playback.
PLAYING A DVD OR VIDEO CD Basic Playback Pause Playback (Still Mode) 1POWER 1 2 Slide your chosen disc into the disc slot on the side panel. Be sure to face the top of the disc (with title etc.) toward the front of the screen. Playback starts. If there are scratches on the DVD or CD Disc, then it may happen the kind of the mechanical noise a little. Stop Playback/Eject 1 Stop playback. At this time, DVD/VCD player stops playback temporarily and maintains the current playback position.
DVD OPERATION Still Picture and Frame-by-Frame Playback 1 Title Menu (DVD only) 1 TITLE MENU Press this button during playback. Press this button during playback. 2 OK 2 Press this button during playback. Press it repeatedly to advance the picture frame-by-frame. DVD OPERATION 3 The TV may not be able to select the disc or title menu depending on a sort of DVD disc. Exit still motion mode. Repeat Playback You can play a specific title, chapter, track, or segment repeatedly.
A-B Repeat Playback Subtitles A-B repeat playback allows you to repeat material between two selected points. 1 1 2 A-B Press it during playback to see the different subtitle languages. Zoom Select the end point. “ AB” is displayed on TV screen and the ending point is set up. Playback starts at the point that you selected. Playback stops at the end point, returns to Point A automatically, then starts again. When enlarging the picture, it may become distorted. Resume normal playback.
DVD OPERATION MP3 OPERATION MP3 Files Playback Options Move to another Track 1 1 When inserted, the MP3 menu screen appears automatically depending on the MP3 disc’s folder (directory) structure. 02 : 30 03 : 37 001 / 011 Press it briefly during playback to go to the next track or to return to the beginning of the current track. G Press it twice briefly to go back to the previous track. / D .. PICTURE 2 PICTURE 1 O.S.T. - 3 PICTURE 3 O.S.T.
AUDIO CD OPERATION On-Screen Display Repeat Playback You can display the Track, and Playback time status on the TV screen. You can play a specific track repeatedly. 1 DISPLAY Press this button during playback. Press it repeatedly to change track information: Single Elapsed, Single Remain, Total Elapsed, or Total Remain. 1 REPEAT Use this button during playback. Press it repeatedly to change the repeat mode: Track, All, Repeat Off.
DVD OPERATION JPG FILE VIEWING OPTIONS As a JPG file is loaded, the table of contents appears on the TV screen. Rotation 1 1 02 : 30 03 : 37 001 / 011 / DVD OPERATION 2 D Repeat Playback You can show JPG files repeatedly. E 500 x 375 1 REPEAT Start Slide show mode. 3 Use this button during playback. Press it repeatedly to change the repeat mode: Shuffle, Random, Repeat One, Repeat All, Repeat Off. Return to play list.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL You can watch the screen in various picture formats; 16:9, Just Scan, Original, 4:3, 14:9 and Zoom1/2. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust the enlarge proportion using button. This function works in the following signal. 1 Q. MENU Select A s p e c t R a t i o.
PICTURE CONTROL • Original When your TV receives a wide screen signal it will automatically change to the picture format broadcast. • Zoom2 Choose Zoom 2 when you wish the picture to be altered, both horizontally extended and vertically cropped. The picture adopting a compromise between alteration and screen coverage. Original PICTURE CONTROL • 14:9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode.
PRESET PICTURE SETTINGS Picture Mode-Preset PICTURE Move 100 100 50 70 70 0 R G E 1MENU 2 Move Aspect Ratio : 16:9 Picture PictureMode Mode :: Vivid Vivid • Backlight • Contrast • Brightness • Sharpness • Colour • Tint OK Vivid Vivid 100 Standard 100 Cinema 50 Sport 70 Game 70 Expert1 Expert2 0 E PICTURE CONTROL Aspect Ratio : 16:9 Picture PictureMode Mode :: Vivid Vivid • Backlight • Contrast • Brightness • Sharpness • Colour • Tint PICTURE OK • Picture Mode adjusts the TV for the best pic
PICTURE CONTROL Auto Colour Tone Control (Warm/Medium/Cool) Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue.
MANUAL PICTURE ADJUSTMENT Picture Mode-User option PICTURE Move 100 70 50 50 50 0 R G Aspect Ratio : 16:9 Picture PictureMode Mode :: Vivid Standard (User) • Backlight • Contrast • Brightness • Sharpness • Colour • Tint E 1MENU 2 Move 100 70 50 50 50 0 OK Vivid Standard Standard (User) Cinema Sport Game Expert1 Expert2 E Select PICTURE. OK Select Picture Mode. OK Select desired picture value. OK Select Backlight, Contrast, Brightness, Sharpness, Clolour or Tint.
PICTURE CONTROL Picture Mode-Expert Control By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users.
PICTURE IMPROVEMENT TECHNOLOGY Fresh Contrast Optimizes the contrast automatically according to the brightness of the reflection. Fresh Colour Adjusts the colour of the reflection automatically to reproduce as close as possible natural colours. Noise Reduction Removes interference up to the point where it does not damage the original picture. Gamma High gamma values display whitish images and low gamma values display high contrast images.
PICTURE CONTROL ADVANCED - FILM MODE To set the TV up for the best picture quality for viewing films. This feature operates only in TV, AV and Component 480i/576i/1080i mode.
ADVANCED - BLACK(DARKNESS) LEVEL When you view a film this function adjusts the TV to best picture quality. This function works in the following mode: AV (NTSC-M), HDMI or Component.
PICTURE CONTROL EYE CARE It helps you adjust brightness when the screen is too bright to prevent dazzling.
PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move PICTURE OK D 1MENU 2 OK Move OK D R G • Backlight 100 • Contrast 100 • Brightness 50 •i Sharpness 70 Resetting video configuration... • Colour 70 R • Tint 0 • Advanced Control • Picture Reset G Select PICTURE. PICTURE CONTROL • Backlight 100 • Contrast 100 • Brightness 50 • Sharpness 70 • Colour 70 • Tint 0 • Advanced Control • Picture Reset Select Picture Reset.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER AVL automatically remains on the same level of volume if you change programmes. AUDIO Move SOUND & LANGUAGE CONTROL Auto : Off AutoVolume Volume : Off Balance Sound Mode : Standard • 120Hz • 200Hz • 500Hz • 1.2KHz • 3KHz 0 L R 0 0 0 0 0 - + - + - + - + - + E 1MENU 2 AUDIO OK Move Auto : Off AutoVolume Volume : Off Balance Sound Mode : Standard • 120Hz • 200Hz • 500Hz • 1.
PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; SRS TruSurround XT, Clear Voice, Standard, Music, Cinema, Sport or Game and you can also adjust the frequency of the equalizer. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. SRS TruSurround XT, Clear Voice, Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory.
SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT -USER MODE Adjusting the audio equalizer. AUDIO Auto Volume Balance Sound Mode Mode Sound Move AUDIO OK : Off 0 SOUND & LANGUAGE CONTROL : :Standard Standard (User) (User) • 120Hz 0 • 200Hz 0 • 500Hz 0 • 1.2KHz 0 • 3KHz 0 L R - + - + - + - + - + E 1MENU 2 OK : Off 0 : :Standard Standard (User) • 120Hz 0 • 200Hz 0 • 500Hz 0 • 1.
BALANCE You can adjust the sound balance of the speakers to preferred levels. AUDIO Move : Off Sound Mode : Standard • 120Hz • 200Hz • 500Hz • 1.2KHz • 3KHz 0 L R 0 0 0 0 0 - + - + - + - + - + E 1MENU 2 Auto Volume Balance Balance Sound Mode Move OK : Off • Balance 0 0 : Standard • 120Hz • 200Hz • 500Hz • 1.2KHz • 3KHz 0 0 0 0 0 F L - + - + - + - + Select AUDIO. Select Balance. OK Make desired adjustment.
SOUND & LANGUAGE CONTROL TV SPEAKERS ON/ OFF SETUP You can adjust the internal speaker status. In AV, COMPONENT, RGB and HDMI1 with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system, turn off the TV internal speakers. AUDIO Move AUDIO OK Move D SOUND & LANGUAGE CONTROL • 500Hz • 1.2KHz • 3KHz • 7.
SELECTING DIGITAL AUDIO OUT This function allows you to select your preferred Digital Audio Output. The TV can only output DOLBY Digital if a channel is broadcast with Dolby Digital audio. When Dolby digital is available, selecting Dolby Digital in the Digital Audio Out menu will set SPDIF output to Dolby Digital If Dolby Digital is selected in the digital audio out menu when dolby digital is not available, SPDIF output will be PCM.
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Move AUDIO OK D SOUND & LANGUAGE CONTROL • 120Hz • 200Hz • 500Hz • 1.2KHz • 3KHz • 7.5KHz • 12KHz Reset •• Reset 1MENU 2 OK Move OK D 0 0 0 0 0 0 0 - + - + - + - + - + - + - + + • 120Hz 0 + • 200Hz 0 + • 500Hz 0 • 1.2KHz 0 i Resetting sound mode configuration... • 3KHz 0 + • 7.5KHz 0 + • 12KHz 0 • Reset • Reset Select AUDIO. Select Reset.
I/II Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears after the programme number and station name disappear. 1 Q. MENU Select AUDIO. 2 Select the sound output. OK On Screen Display Mono MONO Stereo STEREO Dual DUAL I, DUAL II, DUAL I+II A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved.
SOUND & LANGUAGE CONTROL NICAM Reception (In Analogue Mode Only) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received. SOUND & LANGUAGE CONTROL 1 When NICAM mono is received, you can select N I C A M M O N O or F M M O N O. 2 When NICAM stereo is received, you can select N I C A M S T E R E O or F M M O N O.
ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. 1 OK Select your desired language. OK Select your country. 2 * If you want to change Language/ Country selection 1MENU Select OPTION. OK Select Menu Language or Country. OK Select your desired language or country. 3 4 OK Save. SOUND & LANGUAGE CONTROL 2 • Press the MENU button to return to normal TV viewing.
SOUND & LANGUAGE CONTROL LANGUAGE SELECTION (IN DIGITAL MODE ONLY) The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
TIME SETTING CLOCK SETUP The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no DTV signal.) You must set the time correctly before using on/off timer function. TIME Move Clock Clock Off Time On Time Sleep Timer Auto Sleep Time Zone 2 OK 3 OK 4 Clock Clock Off Time On Time Sleep Timer Auto Sleep Time Zone : Off : Off : Off : Off : Canary GMT Move OK Date 06 Month Mar.
TIME SETTING AUTO ON/OFF TIMER SETTING The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. The Off time function overrides the On timer function if both are set to the same time. The TV must be in standby mode for the On timer to work.
AUTO SHUT-OFF SETTING If the TV is switched on and there is no input signal, it will switch off automatically after 10 minutes. TIME Move OK Clock Off Time : Off On Time : Off Sleep Timer : Off Auto AutoSleep Sleep : Off Off Time Zone : Canary GMT 2 Move OK Clock Off Time : Off On Time : Off Sleep Timer : Off AutoSleep Sleep : Off Off Auto Off Off On Time Zone : Canary GMT TIME SETTING 1MENU TIME Select TIME. OK Select Auto Sleep. OK Select Off or On.
TIME SETTING TIME ZONE SETUP When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal. 1MENU 2 Select TIME. OK Select Time Zone. OK Select your viewing area time zone. 3 4 OK Confirm it. TIME SETTING SLEEP TIMER SETTING You do not have to remember to switch the TV off before you go to sleep.
PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. LOCK Move LOCK OK Select Lock System. OK Select On. 4 OK OK 1 2 4 5 6 7 8 9 0 • If you forget your password, press ‘7’, ‘7’, ‘7’, ‘7’ Select LOCK. OK 3 5 LockSystem System Lock Set Password Block Programme Parental Guidance : Off on the remote control handset. Set the password.
PARENTAL CONTROL / RATINGS BLOCK PROGRAMME Blocks any programmes that you do not want to watch or that you do not want your children to watch. It is available to use this function in Lock System “On”.
PARENTAL CONTROL (IN DIGITAL MODE ONLY) This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. A password is required to gain access to this menu. This TV is programmed to remember which option it was last set to even if you switch the TV off. Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
PARENTAL CONTROL / RATINGS KEY LOCK The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing. OPTION Move OK Menu Language : English Audio Language : English Subtitle Language : English Hard of Hearing( ) Off Country :UK Input Label SIMPLINK : On KeyLock Lock : Off Key E PARENTAL CONTROL / RATINGS 1MENU Select OPTION. 2 OK Select Key Lock. OK Select On or Off.
TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
TELETEXT FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. A Page selection 1 2 3 4 Press the T . O P T button and then use button to select i menu. Display the index page. You can select the pages which are colour coded along the bottom line with corresponding coloured buttons. AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode.
DIGITAL TELETEXT *This function works in UK only. The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button.
APPENDIX Initializing (Reset to original factory settings) This function operates in current mode. To initialize the adjusted value. When the Lock System menu is “On”, the message to enter the password appears.
TROUBLESHOOTING The TV does not operate properly. Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Ensure that the correct remote operating mode is set: TV, VCR etc. A Install new batteries.
APPENDIX The audio function does not work. A Picture OK & No sound A A A No output from one of the speakers Unusual sound from inside the TV No sound when connecting HDMI or USB Press the + - button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? A Adjust Balance in menu option.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen.
APPENDIX PRODUCT SPECIFICATIONS 26LG40** 32LG40** 26LG4000-ZA 32LG4000-ZA with stand 666.8 x 524.5 x 267.0 mm 26.2 x 20.6 x 10.5 inches 808.8 x 630.3 x 299.2 mm 31.8 x 24.8 x 11.7 inches without stand 666.8 x 457.8 x 103.0 mm 26.2 x 18.0 x 4.0 inches 808.8 x 551.6 x 108.0 mm 31.8 x 21.7 x 4.2 inches 11.4 kg / 25.2 lbs 9.8 kg / 21.6 lbs 15.5 kg / 34.1 lbs 13.5 kg / 29.
IR CODES 1. How to Connect A Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes A Output waveform Single pulse, modulated with 37.
APPENDIX Code (Hexa) APPENDIX 104 08 0B F0 45 43 AB 07 06 40 41 44 28 AA 30 02 03 00 01 1E 09 10 ~19 53 1A 72 71 63 61 20 21 39 BD 7E B0 BA B1 8F 8E CA 6B B3 B2 Function POWER INPUT TV/RADIO Q.MENU MENU GUIDE Left ( ) Right ( ) Up ( ) Down ( ) OK( ) RETURN INFO i AV MODE + P P FAV MUTE Number Key 0~9 LIST Q.VIEW RED GREEN YELLOW BLUE TEXT T.
EXTERNAL CONTROL DEVICE SETUP RS-232C Setup HDMI/DVI IN 2 RGB IN (PC) 1(DVI) RS-232C IN (CONTROL & SERVICE) AUDIO Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. Connect the serial port of the control device to the RS-232C jack on the TV back panel. Note: RS-232C connection cables are not supplied with the TV. ANTENNA IN Type of Connector; D-Sub 9-Pin Male No.
APPENDIX Set ID Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. G p . 110 OPTION Move OK OPTION D Hearing( Hard of Country Input Label SIMPLINK Key Lock Set SetID ID Power Indicator Factory Reset 1MENU 2 Hearing( :UK : On : Off :1 Hard of Country Input Label SIMPLINK Key Lock Set SetID ID Power Indicator Factory Reset OK ) :UK : On : Off :1 F 1 G Close Select OPTION. APPENDIX OK Select Set ID. OK adjust Set ID to choose the desired TV ID number.
Communication Parameters Baud rate : 9600 bps (UART) A Data length : 8 bits A Parity : None Stop bit : 1 bit A Communication code : ASCII code A Use a crossed (reverse) cable. A A Command Reference List Transmission / Receiving Protocol COMMAND COMMAND DATA 1 2 (Hexadecimal) k k k k k k k k k k k k k k k j j m m m m x a c d e f g h i j k l m t u z u v a b c g b 00 ~ 01 Refer to p.
APPENDIX 01. Power (Command: k a) 04. Volume Mute (Command: k e) G To control Power On/Off of the TV. G To control volume mute on/off. Transmission You can also adjust mute using the MUTE button on remote control. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off Ack 01 : Power On [k][e][ ][Set ID][ ][Data][Cr] G To show Power On/Off.
09. Tint (Command: k j) 13. Balance (Command: k t) G To adjust the screen tint. G To adjust balance. You can also adjust tint in the PICTURE menu. Transmission You can also adjust balance in the AUDIO menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] [k][t][ ][Set ID][ ][Data][Cr] Data Red : 00 ~ Green : 64 * Refer to ‘Real data mapping 1’. See page 110. Ack Data Min : 00 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 110.
APPENDIX 17. Equalize (Command : j v) 18. Tune Command (Command: m a) G To adjust equalize. G Select channel to following physical number. Transmission Transmission [j][v][ ][Set ID][ ][Data][Cr] [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr] MSB Data : LSB 0 0 0 0 0 0 0 0 Frequency Step Frequency : 0 120Hz 1 200Hz 2 500Hz 3 1.2kHz 4 3kHz 5 7.5kHz 6 12kHz Step (Frequency data): Refer to ‘Real data mapping 3’. See page 111. Data 00 : High channel data Data 01 : Low channel data ex. No.
20. Key (Command : m c) G To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 104. Ack [c][ ][Set ID][ ][OK/NG][Data][x] 21. Control Back Light (Command: m g) G To Cont rol t he back light. Transmission [m][g][ ][Set ID][ ][Data][Cr] Data : Min: 00 ~ Max: 64 (*transmit by hexadecimal code) Ack [g][ ][Set ID][ ][OK/NG][Data][x] 22. Input select (Command: x b) (Main Picture Input) G To select input source for main picture.